• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.527-528
• /
• 2006

In the proposed research plan, the effects of anisotropic and time-dependent mechanical properties on nanoindentation measurements of osteonic lamellae in a human cortical bone are investigated. The most popular method(Oliver-Pharr method) in nanoindentation data analysis is based on the assumption of elastic isotropy. Since cortical bone has exhibited anisotropy, it is necessary to consider the effects of anisotropy on nanoindentation measurement for cortical bone. By comparison with the contact area obtained from monitoring the contact profile in FEA simulations, the Oliver-Pharr method was found to underpredict or overpredict the contact area due to effects of anisotropy. The mount of error depended on the indentation orientation. The indentation modulus results and were also similar to moduli calculated from mathematical model. The Oliver-Pharr method has been shown to be useful for providing first order approximations in analysis of anisotropic mechanical properties of cortical bone, although the indentation modulus is influenced by anisotropy.

• 소성∙가공
• /
• 제29권6호
• /
• pp.316-322
• /
• 2020

The flow stress curve is usually determined via uniaxial tensile or simple compression test. However, the flow stress curve up to high strain cannot be obtained using these two tests. This study presents a simple method for obtaining the flow stress curve up to high strain via FE analysis, a simple compression test, and an indentation test. In order to draw the flow stress curve up to high strain, the indentation test was carried out with the pre-stained specimen using the simple compression test. The flow stress curve of Al6110 was evaluated up to high strain using the proposed method, and the result was compared with the flow stress curve of the uniaxial tensile test of the initial material.

• 한국멀티미디어학회논문지
• /
• 제25권9호
• /
• pp.1307-1315
• /
• 2022

In this paper, we proposed and developed a new portable skin elasticity measuring device based on the indentation method using piezoelectric effect. The proposed device is designed to minimize the uncertainty caused by the layer structure of the skin when measuring the elasticity of the skin. And, we developed a piezoelectric-based thin-film pressure sensor that can measure quantitatively and quickly during repeated measurement as a device sensor. To confirm the effectiveness of the proposed measuring device, it was compared with the experimental results of the conventional measuring devices under the same experimental conditions, and statistical correlation analysis was performed between the experimental data of the proposed measuring device and the experimental data of the conventional measuring devices. As a result of the correlation analysis, it was confirmed that the proposed measuring device had a high correlation with the conventional measuring devices. Therefore, it was confirmed that the proposed skin elasticity measuring device was effective.

• 한국전산구조공학회논문집
• /
• 제32권5호
• /
• pp.273-278
• /
• 2019

본 논문에서는 압입시험을 통해서 초탄성 재료 물성치를 평가하는 간단한 방법을 제시하였다. 초탄성 재료 모델 중, 3개의 물성치($C_{10}$, $C_{20}$, $C_{30}$)를 가지는 Yeoh 모델을 선택하여 주연신률로 표현되는 변형률 에너지 밀도를 적용하였다. Yeoh 물성치를 변화시키며, 구형 압입시험 유한요소해석을 수행하여 압입자 반력-변위 곡선을 획득하였다. 압입자 반력-변위 곡선을 3차 다항식으로 근사하였고, 이 다항식을 물성치($C_{10}$, $C_{20}$, $C_{30}$)의 3차 곱으로 근사된 3차 다항식으로 표현하였다. 압입자 반력-변위곡선 근사를 위해 회귀분석을 진행하여 수식들의 계수를 결정하였으며, 이 회귀식을 이용하여 초탄성 재료의 물성치를 평가하였다. 초탄성 재료 물성치 평가를 수행하고 오차를 비교하여 유효성을 보여 주었다.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.529-535
• /
• 2012

본 논문의 목적은 계장화 압입시험과 유한요소해석을 이용하여 아연도금강판의 기계적 물성을 추정하는 것이다. 먼저 인장시험을 통하여 유한요소해석에 요구되는 두께에 따른 아연도금강판의 기계적 물성을 획득하였으며, 이를 이용하여 유한요소해석을 수행하여 특정지점에서의 소성 응력 및 변형률을 획득하였다. 이러한 유한요소해석의 유효성은 계장화 압입시험의 하중-변위선도와 비교를 통하여 검토하였다. 유한요소해석을 통하여 구한 진응력-진변형률 곡선을 인장시험 결과와 비교하여 이의 정확성을 검증하였으며 또한 이를 바탕으로 대표 응력 및 변형률 산출지점을 재평가하였다.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.1081-1086
• /
• 2012

본 논문에서는 품질 검사 방법론이 적용된 계장화 압입시험을 수행하여 점용접부의 경도를 평가하였다. 먼저 정상 및 불량 용접조건하에서 제작된 점용접 샘플에 대해 로크웰 경도 및 계장화 압입시험을 실시하였다. 계장화 압입시험을 통해 구한 압입하중-변위선도를 이용하여 계산된 경도를, 동일한 조건의 동일위치에 대한 압입경도시험을 통하여 측정된 로크웰 경도와 확률론적 방법론을 이용하여 비교평가 하였다. 또한 계장화 압입시험을 통하여 추정한 경도 및 이에 대한 확률론적 해석을 수행하여 점용접부의 신뢰성 기반 품질 관리 기준 설정 가능성을 평가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1367-1372
• /
• 2007

Over the past decade, many computational researches have been performed to investigate quantitative relationships between load-displacement and material properties. But piling-up which causes errors to estimate mechanical material properties remains the most significant unresolved issue in nano-indentation test. This study has estimated quantitative aspects of the effects of material properties, especially work hardening exponent, on piling up/sinking in response of various materials. Using FE Analysis, piling up/sinking in response when material is indented by sharp indenter is investigated to evaluate the effects of material properties. From the FE analysis result, quantitative relationships between piling up/sinking in height and material properties is assessed using dimensional analysis which is used to define scaling variables and universal functions. And nano-indentaion test is performed to verify this relation on various materials. From the result of comparison with prediction from dimensional function and experiment, the work hardening exponent was found to have greater influence on the piling up/sinking in height during the nano-indentation than other material properties, such as elastic modulus and yield stress.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.415-424
• /
• 2014

기존 콘크리트 구조물 내력은 변위 및 스트레인 게이지를 통해 기지의 가력에 따른 변화량을 계측하고, 그 결과를 수치해석 결과와 비교하여 평가한다. 이는 결과적으로 현존 콘크리트의 잔류응력을 계측 평가하므로써 완성될 수 있다. 본 논문은 실험적 응력해석법의 일환으로 콘크리트 구조물에 대한 잔류응력을 비파괴적인 방식으로 평가하는 IITC (Instrumented Indentation Technique for Concrete) 시스템 개발과 관련된 것으로 콘크리트 구조물 표면에서 압입하중과 압입깊이와의 상관관계를 이용한 실험적 평가방법을 논하였다. 본 연구에서는 구성되는 H/W 및 분석용 S/W는 새롭게 개발하였으며, 다각도의 실험결과를 이용하여 콘크리트 구조물에서의 실험적 잔류응력 추정식을 창출하였고, 자동으로 잔류응력을 평가케 함으로써 콘크리트 구조물의 축성단계에서부터 유지관리 단계에까지 자유롭게 내력을 산정할 수 있도록 하였다.

• Tribology and Lubricants
• /
• 제37권4호
• /
• pp.144-150
• /
• 2021

The most cost-effective method of reducing abrasive wear in mechanical parts is increasing their hardness with thin hard coatings. In practice, the composite hardness of the coated substrate is more important than that of the substrate or coating. After full unloading of the load applied to an indenter, its indentation hardness evaluated based on the dent created on the test piece was almost dependent on plastic deformation of the substrate. Following the first part of this study, which proposes a new Brinell hardness test method for a coated surface, the remainder of the study is focused on practical application of the method. Indentation analyses of a rigid sphere and elastic-perfect plastic materials were performed using finite element analysis software. The maximum principal stress and plastic strain distributions as well as the dent shapes according to the substrate yield stress and coating thickness were compared. The substrate yield stress had a significant effect on the dent size, which in turn determines the Brinell hardness. In particular, plastic deformation of the substrate produced dents regardless of the state of the coating layer. The hardness increase by coating behaved differently depending on the substrate yield stress, coating thickness, and indentation load. These results are expected to be useful when evaluating the composite hardness values of various coated friction surfaces.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.240-245
• /
• 2021

Ceramic coatings with high hardness and excellent chemical stability have been successfully applied to various machine elements, tools, and implants. However, in the case of monolayer coating on soft substrates, a high-stress concentration at the interface between the coating and the substrate causes delamination of the coating layer. Recently, to overcome this problem, multilayer coatings with a metal layer with a low modulus of elasticity added between the ceramic and the substrate have been widely applied. This study presents the third part of a recent study and focuses on the effect of the number of coating layers on the Brinell hardness of multilayered coating with TiN/Ti, following the two previous studies on a new Brinell hardness test method for a coated surface and on the influence of substrate and coating thickness. Indentation analyses are performed using finite element analysis software, von Mises stress and equivalent plastic strain distributions, load-displacement curves, and residual indentation shapes are presented. The number of TiN/Ti layers considerably affect the stress distributions and indentation shapes. Moreover, the greater the number of TiN/Ti layers, the higher is the Brinell hardness. The stress and plastic strain distributions confirm that the multilayer coatings improve the wear resistance. The results are expected to be used to design and evaluate various coating systems, and additional study is required.