• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.223-227
• /
• 2015

The study was conducted to investigate the effects of post-incubation period and temperature treatment conditions during incubation on the uniform primordia formation and cultural characteristics of oyster mushroom (Pleurotus ostreatus). Three kinds post-incubation period; 25, 30, 35 days and control were applied for 30 days while two kinds incubation room temperature $23^{\circ}C$ and $26^{\circ}C$ and control were used $20^{\circ}C$. The substrate temperature during pre-incubation was of 'Suhan No. 1' and 'Gonji No. 7'. Oyster mushroom varieties tended to increase between $24^{\circ}C$ to $26^{\circ}C$ at 11 to 15 days after inoculation and then they were maintained in treatment temperature during post -incubation period. The $CO_2$ occurrence was at the highest at 6,500 ppm for 'Suhan No. 1' and 5,800 ppm for 'Gonji No. 7' at the time of the highest temperature increase. The ratio of un-uniformal primordia formation and the ratio of non-commercial fruit body were reduced by 40%, 10.5%, respectively compared to control for 'Suhan No. 1' when in the post-incubation temperature was $26^{\circ}C$, and incubated for 10 days and 15 days treatment. Also, 'Gonji No. 7' was reduced by 19%, 9.5%, respectively when in the post-incubation temperature was $26^{\circ}C$, and incubated for 10 days treatment. Therefore, the higher post-incubation temperature of room and longer post-incubation period resulted in the higher percentage of primordia formation of two cultivars.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.1
• /
• pp.24-28
• /
• 2012

The electrocatalytic activities and surface roughness of indium-tin-oxide (ITO) electrodes have been investigated after thermal treatment at 100, 150, or $200^{\circ}C$ for 30 min, 2 h, or 8 h. To check electrocatalytic activities, the electrochemical behavior of four electroactive species (p-hydroquinone, $Ru(NH_3){_6}^{3+}$, ferrocenemethanol, and $Fe(CN){_6}^{4-}$) has been measured. The electron transfer rate for p-hydroquinone oxidation and ferrocenemethanol oxidation increases with increasing the incubation temperature and the incubation period of time, but the rate for $Ru(NH_3){_6}^{3+}$ is similar irrespective of the incubation temperature and period because $Ru(NH_3){_6}^{3+}$ undergoes a fast outer-sphere reaction. Overall, the electrocatalytic activities of ITO electrodes increase with increasing the incubation temperature and period. The surface roughness of ITO electrodes increases with increasing the incubation temperature, and the thermal treatment generates many towering pillars as high as several tens of nanometer.

• Reproductive and Developmental Biology
• /
• v.30 no.1
• /
• pp.71-74
• /
• 2006

Hypoosmotic swelling test (HOST) is used for evaluating the plasma membrane function and fertilizing ability in mammal spermatozoa. However, HOS solutions and experimental conditions have not been determined clearly for assessing canine spermatozoa. This study was conducted to examine the HOS solutions and assay conditions, including incubation time (30 to 120 min), storage temperature (4, 17 and $20^{\circ}C$), semen status (fresh and frozen). Maximum spermatozoal plasma membrane swelling was obtained in an 150 mOsm Na-citrate/Fructose solutions with an incubation time for 45 min. The storage temperature and semen status affected the percentage of HOS positive spermatozoa. The HOS test adapted to canine spermatozoa in this study was simple and highly consistent assay with good repeatability. The optimal condition of HOST in canine spermatozoa is an 150 mOsm Na-citrate/Fructose solutions with an incubation time for 45 min regardless of semen storage temperature and semen status.

• Journal of Mushroom
• /
• v.1 no.1
• /
• pp.34-43
• /
• 2003

This study was carried out to determine the proper pin-heading induction time(spawn running time) when different incubation temperature were applied to Pleurotus ostreatus(Chunchu 2ho, Suhan 1ho, Heukpyung). Incubation period was 17 days at 23 and 21 days at 17 for Chunchu 2ho, 17 days at 23 and 26 for Heukpyung, and 22~23 days at 17~23 for Suhan 1ho. Incubation period for Suhan 1ho was not significantly affected by incubation temperature. The time required for initial pin-heading was 4~5 days at 17, 20, 23 and 26 for Chunchu 2ho as well as Heukpyung, and was 3 days at 17, 20, 23 and 5~6 days at 26 for Suhan 1ho. As the incubation period became longer, the available fruit-bodies at Chunchu 2ho were made more but they were short. The yield of Chunchu 2ho and Heukpyung increased when incubated for 22~27 days at 20~23 and that of Suhan 1ho also increased when incubated for 22~23 days at 17~23.

• Journal of Dairy Science and Biotechnology
• /
• v.41 no.2
• /
• pp.45-56
• /
• 2023

This review serves two purposes: first, to promote the use of improved optimization techniques in response surface methodology (RSM); and second, to enhance the optimum conditions for the fermentation of probiotics. According to research in dairy science, Lactiplantibacillus plantarum K79 is a candidate probiotic that has beneficial health effects, such as lowering blood pressure. The optimum conditions for L. plantarumK79 to produce peptides with angiotensin-converting enzyme (ACE) inhibitory activity were proposed, through modeling each of ACE inhibitory activity and pH as a function of the four factors that are skim milk concentration (%), incubation temperature (℃), incubation time (hours), and starter added amount (%). To estimate optimum conditions, the researchers employed a desirability-based multi-response optimization approach, utilizing third-order models with a nonsignificant lack of fit. The estimated optimum fermentation conditions for L. plantarum K79 were as follows: a skim milk concentration of 10.76%, an incubation temperature of 36.9℃, an incubation time of 23.76 hours, and a starter added amount of 0.098%. Under these conditions, the predicted ACE inhibitory activity was 91.047%, and the predicted pH was 4.6. These predicted values achieved the objectives of the multi-response optimization in this study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1553-1558
• /
• 2002

This study was carried out to obtain informations regarding the effect of N-acetyl-D-glucosamine in the LEY (lactoseegg yolk) diluent according to incubation time in 5 ml maxi-straw and the effects of freezing rate, thawing temperature and thawing time in the LEN (lactose-egg yolk and N-acetyl-D-glucosamine) diluent on acrosome morphology and motility of frozen-thawed boar sperm. The study showed that the LEN diluent was higher post-thaw NAR (normal apical ridge) acrosome than the LEY diluent for 0.5 h incubation at 37$^{\circ}C$. However, there were no differences between the LEN and LEY diluents on post-thaw sperm motility according to incubation time. The straws frozen from 5.0 cm (20$^{\circ}C$/min) to 17.0 cm (1$^{\circ}C$/min) above the liquid nitrogen surface did not show any significant differences on post-thaw sperm motility. However, the straws frozen above 5.0 cm from the liquid nitrogen surface were higher NAR acrosome than those frozen above 17.0 cm. The post-thaw percentages of motile sperm and NAR acrosome were significantly higher (p<0.05) for the maxi-straws submerged for 40 or 45 sec in a 52$^{\circ}C$ water bath than for 30, 35, 50 or 55 sec. The mean sample temperatures of maxi-straws after 40 or 45 sec submersion were 20.7 or 26.4$^{\circ}C$. In conclusion, the sample temperature of the thawed semen was very important for post-thaw sperm survival in the LEN diluent of 5 ml maxi-straw. When the temperature of the thawed semen was 20.7$^{\circ}C$, the percentages of motile sperm and NAR acrosome were highest.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.765-771
• /
• 2016

Omija-cheong, concentrated extracts from sugar-treated Omija fruit (Schisandra chinensis Baillon), is produced by traditional manner in Korea. The quality characteristics of Omija-cheong processed at low temperature with a pilot-scale were investigated to optimize the incubation time. With increasing incubation time in processing Omija-cheong, the pH level of Omija-cheong remained constant, while titratable acidity and organic acids increased. Fresh Omija fruits contained citric, malic and succinic acids, most of which were extracted into concentrated extracts after 37 days of incubation and reached to the stable concentration after 47 days of incubation. Titratable acidity in Omija-cheong gradually increased from 1.18% to 2.71%, and also was correlated with total concentration of organic acids. About 80% of supplemented sucrose for manufacturing Omija-cheong was converted into glucose and fructose until 68 days of incubation, and the composition of free sugars was maintained to be stable up to 138 days of incubation. The contents of total flavonoids and phenolic compounds in Omija-cheong were 24.1 mg-GAE/L and 1,635 mg-QE/L at 57 days of incubation, which were more than 9 and 5 times higher than those in Omija fruits, respectively. From the quality characteristics in processing Omija-cheong by low-temperature incubation, more than 60 days of incubation is required for the constant quality and value-added beverage.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.106-112
• /
• 2010

This paper presents some experimental results on incubation time for massive hydriding of Zr alloys with oxide thickness. Oxide effects experiments on massive hydriding reaction of commercial Zr alloy claddings and pre-oxidized Zr alloys with hydrogen gas were carried out in the temperature range from 300 to $400^{\circ}C$ with thermo-gravimetric apparatus. Experimental results for oxide effects on massive hydriding kinetics show that incubation time is not proportional to oxide thickness and that the massive hydriding kinetics of pre-filmed Zr alloys follows linear kinetic law and the hydriding rate are similar to that of oxide-free Zr alloys once massive hydriding is initiated. There was a difference in micro-structures between oxide during incubation time and oxide after incubation time. Physical defects such as micro-cracks and pores were observed in only oxide after incubation time. Therefore, the massive hydriding of Zr alloys seems to be ascribed to short circuit path, mechacical or physical defects, such as micro-cracks and pores in the oxide rather than hydrogen diffusion through the oxide resulting from the increase of oxygen vacancies in the hypostoichiometric oxide.

• Korean Journal of Microbiology
• /
• v.21 no.1
• /
• pp.1-6
• /
• 1983

Effects of carbon sources, incubation time, incubation temperature, initial incubation pH, and vitamin B complex on the polygalacturonase activity of Byssochlamys fulva were studied to confirm the optimum conditions for the production of that enzyme. When pectin was used as carbon source, polygalacturonase activity reached to the maximum value of 0.50 units/ml. After 5 days of incubation, polygalacuturonase activity reached to its maximum of 0.48units/ml. Polygalacturonase activities were similar between $25^{\circ}C\;and\;45^{\circ}C$, however, decreased dramatically in the outside of this range. Polygalacturonase activity was not signicicantly influenced by the variation of initial incubation pH. However, at pH5.0, polygalacturonase activity was slightly through the addition of thiamine and riboflavin, and the optimum concentrations were $10^{-2}M$ in case of thiamine and $10^{-3}M$ in riboflavin.

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.88-95
• /
• 1996

The effects of media, incubation time, temperature and pH on production of conidia and chlamydospore of Cylindrocarpon destructans (Zinssm.) Scholen causing root rot of Panax ginseng were studied. Microconidia of the pathogen were abundantly produced on V-8 juice agar as a solid substrate with 5.73(log conidia/mm2) and in V-8 broth as a liquid substrate with 6.65 (log conidia/ml) among media tested. No difference was observed on the length of microconidia produced from the media with a range of 9.50∼11.38 $\mu\textrm{m}$. However, tryptic soy agar produced the broadest microconidia (average 5.00 $\mu\textrm{m}$) among the media tested. All the media produced chlamydospores In a range of 1.06∼4.37 (log chlamydospores/mm2) without a significant difference in number, while V-8 juice agar produced the bigger one (18.39 $\mu\textrm{m}$ in diameter) as compared to the tested media. The fungus began to sporulate conidia after three days of incubation and reached maximum at the 8th day. It seemed to be in a stationary phase until 30 days of incubation but was decreased thereafter. Chlamydospore was produced at 4th day after incubation. Maximum production was observed at 8th day and the number seemed to be maintained during the observation period. Both conidia and chlamydospore of the pathogen were able to be spoluated at 10∼25$^{\circ}C$. However, optimum temperatures of conidia and chlamydospore formation were 15∼25$^{\circ}C$ and 10∼20$^{\circ}C$, respectively. C. destrmtans produced conida with an wide range of pH from 3.3 to 8.0 and chlamydospore from 2.8 to 8.0. Number of conidia was increased with an increase of pH up to 4.0. There was no significant difference in the number between 4.0 to 8.0. It seemed to have two optimum pH ranges, 3.3∼4.0 and 7.1∼8.0 for the chlamydospore formation.