• Natural Product Sciences
• /
• v.23 no.4
• /
• pp.247-252
• /
• 2017

The methylglyoxal (MGO) trapping constituents from onion (Allium cepa L.) peels were investigated using pre-column incubation of MGO and crude extract followed by HPLC analysis. The peak areas of MGO trapping compounds decreased, and their chemical structures were identified by HPLC-ESI/MS. Among major constituents in outer scale of onion, 2-(3,4-dihydroxybenzoyl)-2,4,6-trihydroxy-3(2H)-benzofuranone (2) was more effective MGO scavenger than quercetin (6) and its 4'-glucoside, spiraeoside (3). After 1 h incubation, compound 2 trapped over 90% MGO at a concentration of 0.5 mM under physiological conditions, but compounds 3 and 6 scavenged 45%, 16% MGO, respectively. HPLC-ESI/MS showed that compound 2 trapped two molecules of MGO to form a di-MGO adduct and compounds 3 and 6 captured one molecule of MGO to form mono-MGO adducts, and the positions 6 and 8 of the A ring of flavonoids were major active sites for trapping MGO.

• Korean journal of food and cookery science
• /
• v.7 no.4
• /
• pp.9-13
• /
• 1991

Nochi is a kind of Korean traditional food made from glutinous rice or millet. This study attempted to examine the effects o( the various factors and to clarify the factors which affect the overall eating quality of Noch. The results were summarized as follows. 1. Starch content of waxy rice was 72.4% and IBC was 0.017%. 2. $\alpha$-amylase and $\beta$-amylase activity of malt were 40.13 and 8.94 units respectively. 3. Waxy rice soaked for 3 hours was ground to flour then sifted 20 mesh sieve. The mixture of waxy rice and malt was steamed for 20 minutes. 4. In sensory evaluation on varying the amount of malt and incubation time, the most favorite tendancy of the overall eating quality was at the level of 8hours incubation made by 5% addition of malt. 5. Total sugar contents, reducing sugar contents and the intensities of iodine stain at the incubation temperature of $60^{\circ}C$ were significantly different from those at $50^{\circ}C$.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.34-41
• /
• 2001

It is well known that bioassay on the low organic matters in water have developed from the two methods. One is assimilable organic carbon(AOC) that makes use of the maximum growth biomass of the pure strains for the standard substrates, the other is biodegradable dissolved organic carbon(BDOC) that determines the fraction of dissolved organic carbon(DOC) available for microbial utilization. The purpose of this study was to upgrade the measurement method of BDOC in natural water or drinking water. BBOC was determined by means of the bacterial growth and the DOC decrease at the same time. The origin inoculums were used to the suspended bacteria from Han River water, The initial optimum biomass and incubation time for initial DOC were induced by variation of nutrient repression and inoculums. The time reached to minimum DOC was selected as incubation time. The initial optimum biomass for Han river water was about 1000~5000 CFU/mL, respectively. In a sufficient biomass, suitable incubation time was about 3~5 day. It was indirectly calculated BDOC on maximum growth rate by measuring growth yield of indigenous bacteria. But it was difficult to adapt growth yield coefficient because of irregular bacterial growth. The measured 3 day BDOC was close to BDOC calculated with our proposed experimental equation between DOC and BDOC. It shows that the quantification of BDOC with this experimental equation can be used indirectly.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1700-1709
• /
• 1993

The stepped specimen which is subjected to step loading is modeled to study the initiation and growth of adiabatic shear band using explicit time integration finite element method. Three different clearance sizes are tested. The material model for the stepped specimen includes effects of strain hardening, strain rate hardening and thermal softening. It is found that the material inside the fully grown adiabatic shear band experiences three phase of deformation, (1) homogeneous deformation phase, (2) initiation/incubation phase, and (3) fast growth phase. The second phase of deformation is initiated after sudden shear stress drop which occurs at the same time regardless of the clearance size. The incubation time prior to fast growth phase increases, as the clearance size of the stepped specimen increases. Whereas, after incubation period, the growth rate of the adiabatic shear band decreases, as the clearance size decreases. It is also found that two adiabatic shear band may develop instead of one for the smaller clearance size.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.657-662
• /
• 2003

This paper presents a new fabrication method of selective SiGe epitaxial growth at 650 $^{\circ}C$ on (100) silicon wafer with oxide patterns by reduced pressure chemical vapor deposition. The new method is characterized by a cyclic process, which is composed of two parts: initially, selective SiGe epitaxy layer is grown on exposed bare silicon during a short incubation time by SiH$_4$/GeH$_4$/HCl/H$_2$system and followed etching step is achieved to remove the SiGe nuclei on oxide by HCl/H$_2$system without source gas flow. As a result, we noted that the addition of HCl serves not only to reduce the growth rate on bare Si, but also to suppress the nucleation on SiO$_2$. In addition, we confirmed that the incubation period is regenerated after etching step, so it is possible to grow thick SiGe epitaxial layer sustaining the selectivity. The effect of the addition of HCl and dopants incorporation was investigated.

• Carbon letters
• /
• v.25
• /
• pp.95-102
• /
• 2018

We examined the pressure effects on petroleum pitch synthesis by using open and closed reaction systems. The pressure effects that occur during the pitch synthesis were investigated in three pressure systems: a closed system of high pressure and two open systems under either an atmosphere or vacuum. A thermal reaction in the closed system led to the high product yield of a pitch by suppressing the release of light components in pyrolysis fuel oil. Atmospheric treatment mainly enhanced the polymerization degree of the pitch via condensation and a polymerization reaction. Vacuum treatment results in a softening point increase due to the removal of components with low molecular weights. To utilize such characteristic effects of system pressure during pitch preparations, we proposed a method for synthesizing cost-competitive pitch precursors for carbon materials. The first step is to increase product yield by using a closed system; the second step is to increase the degree of polymerization toward the desired molecular distribution, followed by the use of vacuum treatment to adjust softening points. Thus, we obtained an experimental quinoline insolubles-free pitch of product yield over 45% with softening points of approximately $130^{\circ}C$. The proposed method shows the possibility to prepare cost-competitive pitch precursors for carbon materials by enhancing product yield and other properties.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.149-158
• /
• 2009

Tsutsugamushi fever occupies more than 80% of total fall epidemic diseases and has an incubation period of 1 or 2 weeks as well. We have assumed that the incubation period distribution is gamma and therefore, reach an agreement that the infected distribution is normal with ${\hat{\mu}}=309.92$, ${\hat{\sigma}}=14.154$ by back calculation method. The infection cases are found severely large around the month of October. The infection case distribution demonstrates the incidence number increasing rapidly and progresses fast during the month of November. In this study, we have calculated the future prevalence number of maximum 1,200 people by inferred infection probability and incubation period distribution with some sort of limitation that the trend of increasing incidence number is not taking into an account. We considered the SIRS model which is also known as epidemic model, familiar to interaction between epidemiological classes. Our estimated parameters converged well with the initial parameter values.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.1
• /
• pp.65-71
• /
• 2002

Objective : To estimate the status of HIV infection and AIDS incidence using a back-calculation model in Korea. Methods : Back-calculation is a method for estimating the past infection rate using AIDS incidence data. The method has been useful for obtaining short-term projections of AIDS incidence and estimating previous HIV prevalence. If the density of the incubation periods is known, together with the AIDS incidence, we can estimate historical HIV infections and forecast AIDS incidence in any time period up to time t. In this paper, we estimated the number of HIV infections and AIDS incidence according to the distribution of various incubation periods Results : The cumulative numbers of HIV infection from 1991 to 1996 were $708{\sim}1,426$ in Weibull distribution and $918{\sim}1,980$ in Gamma distribution. The projected AIDS incidence in 1997 was $16{\sim}25$ in Weibull distribution and $13{\sim}26$ in Gamma distribution. Conclusions : The estimated cumulative HIV infections from 1991 to 1996 were $1.4{\sim}4.0$ times more than notified cumulative HIV infections. Additionally, the projected AIDS incidence in 1997 was less than the notified AIDS cases. The reason for this underestimation derives from the very low level of HIV prevalence in Korea, further research is required for the distribution of the incubation period of HIV infection in Korea, particularly for the effects of combination treatments.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.3
• /
• pp.301-307
• /
• 1987

A total of 42 strains of Candida albicans were examined for susceptibility to three antifungal agents, amphotericin B(AMB), 5-fluorocytosine(5-FC), and ketoconazole(KTZ), using defined medium, synthetic amino acid medium-fungal(SAAM-F), supplemented yeast nitrogen base(SYNB) and undefined medium Sabouraud's dextrose broth(SDB) and Kimmig broth media. A tube dilution method was used with minimum inhibitory concentrations(MICs) determined after incubation for 24 hour and 48 hours. All testes were performed in duplicate. In general, MICs were more reproducible after 48 hour of incubation. Forthermore, MICs determined after incubation for 48 hours were significantly higher than those determined after 24 hours. The actural MICs obtained with the different antifungal agents were clearly influenced by the test medium used. The rank order of AMB MICs according to the test medium was as follows: SAAM-F>SYNB>SDB>Kimmig broth. With 5-FC, the following pattern was observed: SYNB>SAAM-F>SDB>Kimmig borth. For ketoconazole, the MICs according to the test medium was SAAM-F>SDB>SYNB> Kimmig broth. In amphotericin B, the MICs mean value with the test medium was as follows: SDB, 0.24 mcg/ml; Kimmig broth, 0.29 mcg/ml; SYNB, 0.21 mcg/ml and SAAM-F, 0.15mcg/ml. The actural value of 5-FC was; SDB, 37.20 mcg/ml; Kimmig broth, 67.41mcg/ml; SYNB, 21.29 mcg/ml and SAAM-F, 24.61 mcg/ml and in ketoconazole, the MICs value was; SDB, 1.83 mcg/ml; Kimmig broth, 4.08 mcg/ml; SYNB, 1.95 mcg/ml and SAAM-F, 1.41 mcg/ml. The results of this investigation suggested that broth dilution susceptibility testing of yeast and yeast-like fungi are best performed with an incubation period of 48 hours. Furthermore, medium composition can significantly influence the results of such testing.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.51-60
• /
• 2002

This study was carried out to develop the biochemical pulping method to enhance energy saving and decrease the capital cost through the soda pulping under atmospheric pressure (100%). Nonwood substrates, rice straw, were pretreated by white-rot fungi, Ganoderma Iucidum. It has acquired several basic data that can be applied in bio-soda pulping. The results of this study were as follow. Without any nutrients or with glucose, N and glucose+N the weight losses of rice straws inoculated by Canoderma Iucidum were 8.5~29.8%, 9.3~32% 11.8~30.1% and 11.8~24.4% respectively for 5, 10, 15, 20, 25 and 30 days incubation. The more extending incubation periods, the more increasing weight losses. The yield of untreated rice saw was 54.8% after pulping. When any nutrients was not added or glucose, N and glucose+N were added for the pretreatment, the total yields were ranged 50.6~38.5%, 48.6~34.4%, 47.2~38.4% and 49.5~42.6% respectively for 5, 10, 15, 20, 25 and 30 days incubation. The yields were gradually decreased based on extending of incubation. The physical properties of rice straw soda pulps without fungal treatment, the density, breaking length, burst index, tear index and folding endurance were 0.24 g/$\textrm{cm}^3$, 2.32 km, 0.91 kPa $m^2$/g, 56.7 mN.$m^2$/g and 35 times, respectively. After pretreatment without any nutrients or with glucose, N and glucose+N as nutrients the density was 0.27~0.30 g/$\textrm{cm}^3$, the breaking length 3.14~5.25 km, burst index 1.42~2.78 kPa.$\textrm{m}^2$/g, tear index45.8~64.5 mN.$\textrm{m}^2$/g and folding endurance 47~288 times at all incubating periods when pulping was done. The physical properties were increased with the increasing incubation periods. However, when glucose+N was added, the physical properties were shown superior results each incubating duration.