• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.259-272
• /
• 1999

In order to enhance the selectivity, productivity and yield of methyl fructoside, which was synthesized by enzymatic glycosylation of sucrose and methanol solution, controlling of surface property of solid support using different immobilization procedures optimized microenvironment of immobilized invertase. Silanization and polyethylene imine coating methods were adopted to give a hydrophobic and hydrophilic environment of immobilized invertase. As a result, polyethyleneimine coating method gave higher loading of enzyme, effective activity, and relative activity than silanization method, because it brought on increasing the functional density of amino group and enhancing the conservation of activity by regulating of hydrophilicity. And then, hydrophilic environment was possible to restraint the assessing of methyl fructoside molecule, which was more hydrophobic than sucrose, fructose, and glucose molecule in the reaction mixture, into .the active site of immobilizedinvertase. Consequently, hydrophilic microenvironment of immobilized invertase by polyethyleneimine coating obtained higher yield and productivity with increasing conversion than silanized and native invertase. Thus, this procedure optimized the microenvironment of immobilized invertase suitable for the enzymatic synthesis of methyl fructoside.

• 생약학회지
• /
• 제17권2호
• /
• pp.178-183
• /
• 1986

It was our working hypothesis that introduction of 11-keto groups to 12-oleanene/ursene series of triterpenoids should endow them with corticoid-like activities, since pharmacological actions of glycyrrhetinic acid (GA) are known to be caused by inhibition on $corticoid-{\delta}^4-reductase$. 11-Keto-triterpenoids derived artificially in these studies, such as 11, 19-diketo-18, 19-secoursolic acid methyl ester(I), $11-keto-{\beta}-boswellic$ acid derivatives (IIa-IIc), 11-Keto-presenegenin dimethyl ester (III), II-keto-oleanolic acid derivatives (IVa-IVd) and 11-keto-hederagenin (V) possess the fundamental functions of ${\alpha},\;{\beta}-unsaturated$ ketone on C-11 and hydroxyl group on C-3, as like GA (VI). Additionally, they involve the carboxyl groups on rings A (II, III), D (I, III, IV, V) and E (VI), and the hydroxyl groups on rings A (III, V) and C (III). All the compounds competitively inhibited $corticoid-5{\beta}-reductase$, and the highest inhibitory potency appeared in I. All of them except $3,\;11-diketo-{\beta}-boswellic$ acid methyl ester (IIc) were more effective about five times to twice than GA. On carrageenin-induced edema test, compounds I and IVa-IVd showed anti-inflammatory activities, but III enhanced rather edema. Structure-activity relations were found in the aspects of hydrophilicity of ring A and hydrophobicity of rings C/D. The more they were hydrophilic in ring A and hydrophobic in rings C/D, the more they inhibited the enzyme. And the more they were hydrophobic in rings C/D, the more they exhibited antiiflammatory activities. However, the increased hydrophilicity in ring A resulted in increasing edema, probably due to a nonspecific inhibition on $aldosterone-5{\beta}-reductase$.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.165-170
• /
• 2005

의료용 임플랜트의 혈액적합성 개선을 위하여 박막코팅에 대한 관심이 증대하고 있다. 특히 diamond-like carbon(DLC)과 titanium nitride(TiN) 박막은 우수한 화학, 물리적 성질은 물론 생체적합 특성까지 갖추고 있다. 따라서 이들 박막의 혈액 적합성과 물리적 특성과의 관개를 연구하기 위하여 박막표면의 모폴로지 및 젖음성과 fibrinogen흡착 특성을 비교 분석하였다. 혈액응고 원인이 되는 fibrinogen의 흡착량은 DLC보다 TiN의 경우가 적어, 보다 우수한 특성을 보였으며, 이것은 TiN박막 표면의 높은 친수성으로 인한 것으로 판단된다. 박막표면의 fibrinogen 흡착을 줄이기 위해 플라즈마 처리 및 노(爐) 열처리를 각각 수행하였다. 산소 플라즈마 및 열처리를 하였을 경우 DLC 박막은 큰 효과가 없는 반면 TiN 박막의 경우 fibrinogen 흡착량이 크게 줄어 보다 개선된 결과를 보였다.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.205-224
• /
• 2015

A novel hydrophilic poly (vinylidene fluoride)/poly (p-phenylene terephthalamide) (PVDF/PPTA) blend membrane was prepared by in situ polycondensation of p-phenylene diamine (PPD) and terephthaloyl chloride (TPC) in PVDF solution with subsequent nonsolvent induced phase separation (NIPS) process. For comparison, conventional solution blend membrane was prepared directly by adding PVDF powder into PPTA polycondensation solution. Blend membranes were characterized by means of viscometry, X-ray photoelectron spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FESEM). The effects of different blending methods on membrane performance including water contact angle (WCA), mechanical strength, anti-fouling and anti-compression properties were investigated and compared. Stronger interactions between PVDF and PPTA in in situ blend membranes were verified by viscosity and XPS analysis. The incorporation of PPTA accelerated the demixing rate and caused the formation of a more porous structure in blend membranes. In situ blend membranes exhibited better hydrophilicity and higher tensile strength. The optimal values of WCA and tensile strength were $65^{\circ}$ and 34.1 MPa, which were reduced by 26.1% and increased by 26.3% compared with pure PVDF membrane. Additionally, antifouling properties of in situ blend membranes were greatly improved than pure PVDF membrane with an increasing of flux recovery ratio by 25%. Excellent anti-compression properties were obtained in in situ blend membranes with a stable pore morphology. The correlations among membrane formation mechanism, structure and performance were also discussed.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.584-594
• /
• 2014

고분자 필름의 표면에 친수성의 증가시키는 것은 그 자기 세정 및/또는 방담 특성을 가지게 하는데 중요한 접근 방법이다. 일반적으로 친수성 표면은 비이온 계면활성제를 코팅하거나 표면에너지를 증가시킴으로써 제조할 수 있다. 본 연구에서는 가격이 저렴하고 톨루엔 용제에 잘 용해될 뿐 만아니라 커플링제와 반응할 수 잇는 하이드록시기를 가지고 있는 Tween, Span 및 PEG-PPG 블록공중합체를 선택하여 실험을 수행하였다. 배합 조건에 따라 PET 필름 표면의 친수도에 큰 영향을 미침을 확인하였다. 그러나, PET 필름의 표면상에 단순히 이들 계면활성제의 도입은 수세 후에는 높은 내구성을 보여주지 않았다. 내구성을 높이기 위해 에폭시 및 이소시아네이트와 같은 두 종류의 커플링제를 사용하였다. 코팅액에 6 중량 %isophrone 디이소시아네이트 (IPDI)를 함유한 코팅액으로 코팅된 PET 필름 표면의 물에 대한 접촉각은 $8.7^{\circ}$까지 낮아졌으며, 이는 매우 높은 친수성에 대한 간접적인 증거이다. 또한, 코팅된 PET 필름의 광 (파장 500 nm) 투과율 값은 높은 투명 특성을 유지하면서 87%에서 85%로 약간 감소하였다. 이 PET 필름은 자기 세정 특성이 필요한 필름산업에 적합한 소제로 사용될 수 있다.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.69-73
• /
• 2004

A series of $H_3PO_4$-doped composite membranes based on poly(vinyl alcohol)(PVA) and silica have been prepared by sol-gel process. The proton conductivity, as well as properties of swelling, methanol permeation, was measured in this study. The proton conductivity increased with the molar ratio of $H_3PO_4$ to silica. With the silica content increasing, swelling degree decreased and methanol permeability showed a slight increase. It suggested that the former was mainly determined by hydrophilicity of the membrane, while the latter was dominated by the interconnectivity of matrix. According to the value of on, the optimal conformations of these composite membranes were 60, 70, 80 wt.$\%$ of PS-x in membranes, where x were 1.5, 1.0, and 0.5, respectively. These composite membranes were thermal stability up to $200^{\circ}C$.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.20-27
• /
• 2006

On the purpose of surface modifications of polypropylene meltblown(PPMB) nonwovens, PPMB nonwovens were treated in the plasma system by oxygen atmosphere with different treatment time and discharge power. Dimensional change and physical properties of the treated nonwovens were evaluated. Contact angles onto PPMB nonwovens about water and methyleneiodide were measured and surface energies were calculated by Owen's method. As the results, microcraters were observed on the surface of treated nonwovens. Tenacity and breaking strain of PPMB nonwovens decreased with increasing treatment time and discharge power. Surface energy of PPMB nonwovens increased by plasma treatment. Meanwhile, the friction static voltage and dyeability of PPMB nonwovens have enhanced to some extent by oxygen plasma treatment due to the improvement of surface hydrophilicity.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.465-470
• /
• 2017

Sulfonated fluorinated block copolymers having diphenyl units were mixed with the sulfonated cationic conductive polymers at an optimum mixing ratio to form hybrid membranes for fuel cells and their characteristics were studied. 2D and 3D AFM topology analysis confirmed that the number of hydrophilic units in the hybrid membrane was improved. Through the FE-SEM, the microstructure of the hybrid membrane implied hydrogen bonding and pi-pi interactions, and EDAX confirmed carbon, oxygen, sulfur, and fluorine. The thermogravimetric analysis showed that the hybrid membrane was thermally stable and the hydrophilicity of the hybrid membrane was increased by the contact angle of water droplets. As a result, it was confirmed that the cation conductivity increased by a factor of 1.8 times as the number of acidic domains in the hybrid film increased.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.135-141
• /
• 2020

The primary and secondary alcohols in cellulose reacted with acrylonitrile(AN) in the presence of strong alkalis to form cyanoethylated cellulose. The partially cyanoethylated cotton(CEC) fabric with AN in the presence of aqueous sodium hydroxide solution was described, including effects of treatment time and reagent concentrations. The weight increases of cotton fabric were shown to be linearly related to the treatment time, temperature and concentration of sodium hydroxide. The physical properties such as shrinkage ratio and tensile strength were proportional to the weight increases without significant impact on elongation. But the moisture regain decreased with decreasing hydrophilicity. The degree of substitution(DS) and transfer ratio were linearly related to the weight increases. In the CEC with increasing weight up to 24.9%, it has been obtained with DS up to 0.63-0.67 cyanoethyl groups per anhydroglucose and transferring ratio up to 87.7%. The color fastness to washing by sublimation transfer printing was improved by the cyanoethylation.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.175-180
• /
• 2023

Mixed matrix membranes (MMMs) can be a promising alternative for the solution of dye removal from coloured effluents. Polymeric membranes are widely used due to their good film-forming ability, flexibility, separation properties, and cost. However, they have low mechanical, chemical, and thermal resistances. Moreover, the fouling of polymeric membranes is high because of their hydrophobic nature. Hence, there is an increasing interest in organic-inorganic hybrid membranes as a new-generation membrane material. It has been shown that carbon nanotubes have the potential to increase the material properties of polymers with their low density, high strength, hardness, and exceptional aspect ratio. In this work, carbon nanotubes blended MMMs were prepared and methyl orange removal efficiency of them was investigated. Compared to the bare membranes, MMMs showed not only increased hydrophilicity, water content, and pure water flux but also increased methyl orange rejection and flux recovery