• 한국전산유체공학회지
• /
• 제7권1호
• /
• pp.28-35
• /
• 2002

The effect of concave curvature on the natural convection has been numerically studied using the higher-order finite difference method. The heating wall in a enclosure is approximated by a cosine function. The heat transfer coefficient is analyzed for three Rayleigh numbers and five amplitudes. For Ra = 10/sup 8/ the separation and reattachment are observed on the adiabatic walls. The wall heat transfer are slightly changed by the increasing curvatures.

• 대한수학회논문집
• /
• 제12권3호
• /
• pp.755-768
• /
• 1997

In this paper we introduce a new concept of negative dependence of multivariate random variables. This concept is weaker than the negative orthant dependence(NOD) but it enjoys some properties and preservation results of NOD.

• International Journal of Reliability and Applications
• /
• 제8권1호
• /
• pp.95-109
• /
• 2007

The purpose of this paper is to study new notions of stochastic comparisons and ageing classes based on the total time on test transform order. We give relationships to other stochastic orders and aging classes given previously. Several preservation properties under the reliability operations of random minima and series system are given.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.217-230
• /
• 2014

The purpose of this study is to develop the Generalized Depreciation Function (GDF) and Winfrey Depreciation Function (WDF) by reviewing methods for the depreciation accountings. The Depreciation Accounting Models (DAM), including straight-line model, declining-balance model, sum-of-the-year-digit model and sinking fund model presented in this paper, are reclassified into the charging pattern of increasing type, decreasing type and constant type. This paper also discusses the development of the GDFs based on convex type, concave type and constant type according to the demand pattern of product, frequency of plant usage, deterioration of time, relative inadequacy, Capital Expenditure (CAPEX) and Operating Expenditure (OPEX) of the Total Productive Maintenance (TPM). The WDFs presented in this paper depict a sudden degradation of plant performance by measuring the change of TPM activity at the midpoint of useful life of asset. The WDFs are classified into left-modal type, symmetrical type and right-modal type by varying the value of skewness and kurtosis. Moreover, three increasing patterns, such as convex, concave and linear types, are used in this paper to present the distinct identification of WFDs by using Instantaneous Depreciation Rate (IDR) in terms of Performance Depreciation Function (PDF) and Depreciation Density Function (DDF). In order to have better understanding of depreciation models, the numerical examples are used for evaluating the Net Operating Less Adjusted Tax (NOPLAT) and Economic Value Added (EVA). It is concluded that the depreciation models showing a large dispersion of EVA require the adjustment of NOPLAT and Invested Capital (IC) based on the objective cash basis and net operating activity for reducing the variation of EVA.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.45-53
• /
• 2009

As the point sampling technology evolves rapidly, there has been increasing need in generating tool path from dense point set without creating intermediate models such as triangular meshes or surfaces. In this paper, we present a new tool path generation method from point set using Euclidean distance fields based on Algebraic Point Set Surfaces (APSS). Once an Euclidean distance field from the target shape is obtained, it is fairly easy to generate tool paths. In order to compute the distance from a point in the 3D space to the point set, we locally fit an algebraic sphere using moving least square method (MLS) for accurate and simple calculation. This process is repeated until it converges. The main advantages of our approach are : (1) tool paths are computed directly from point set without making triangular mesh or surfaces and their offsets, and (2) we do not have to worry about no local interference at concave region compared to the other methods using triangular mesh or surface model. Experimental results show that our approach can generate accurate enough tool paths from a point set in a robust manner and efficiently.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.640-655
• /
• 2003

Statement of problem : The beauty has a little different meaning according to a time, culture, and nation. Purpose : This study was undertaken to determine the Korean perception of the altered upper anterior dental esthetics including the lack of symmetry, the midline deviation, the gingival exposure, the inclination of incisal plane, the type of incisal plane, and the type of gingival line. Material and Method : 670 subjects were participated in this survey. A questionnaire accompanied by 12 sets of computer-manipulated images using 3D MAX 4.2 software was used to record the ranking of the geometric preference related to the anterior esthetic discrepancies in three or four degrees of alteration. The statistical significance of the differences between the groups was determined by a one-way ANOVA and a t-test. Results : The results obtained were as follows: 1) The Korean perception of the anterior dental esthetics according to the subjects' occupation, sex, and age was most affected by occupation. 2) The masked image emphasizing the dentition and lips appeared stranger than the non-masked image at the same alteration. 3) The lack of symmetry, which was expressed as a unilateral discoloration of the tooth, showed incongruity in any teeth of the anterior dentition. The incongruity was more severe as the degree occurred closer to the midline. 4) The deviation of midline was showed more severe strangeness as the degree of deviation increased. However, more than half of the subjects did not perceive a deviation of 5mm. 5) During smiling, the exposure of the upper gingiva showed more severe incongruity as the degree of gingival exposure increased. 77% of the subjects perceived strangeness at the gingival exposure of 4.5mm. 6) The inclination of the incisal plane appeared stranger as the degree of inclination increased. 62% of subjects perceived strangeness at the $7.5^{\circ}$ inclination of the incisal plane. 7) The type of incisal plane showed increasing strangeness in the order of convex/downward, straight/horizontal, and concave/upward. 80% of subjects perceived strangeness at concave/upward. 8) The type of gingival line was showed increasing incongruity in the order of the same, a little above, and a little under the zenith of the lateral incisor to the line joining the zenith of the central incisor and the canine. However, less than half the subjects did not perceive strangeness at any alteration of the gingival line. Conclusion : The Korean perception of the upper anterior dental esthetics was different to the westerner's perception in the some respects.

• 한국정밀공학회지
• /
• 제28권11호
• /
• pp.1259-1264
• /
• 2011

This paper suggests a new film-type haptic actuator based on cellulose acetate electro-active paper. Conventional tiny haptic actuators in mobile devices can create vibrotactile sensation at only near resonant frequency. The strategy of operating near the resonant frequency, however, brought a new issue for creating vibrotactile sensation which can be strong enough to feel in arbitrary frequency. Another problem is that the size of the conventional actuator is not small enough to be embedded into slim mobile devices. In order to achieve these issues, we propose a thin and tiny actuator based on a cellulose acetate material charged with an electric potential. The motion of the actuator can be a concave or a convex by controlling a polarity of both charged membranes and the actuator performance can be modulated by increasing level of biased electric potential.

• 분석과학
• /
• 제13권2호
• /
• pp.222-228
• /
• 2000

비분산 적외선 방식에 의한 대기 중 일산화 탄소 측정용 검출기를 제작하고, 감도 및 안정성을 조사하였다. 검출 감도를 향상시키기 위하여 동일 흡수셀 내에 3개의 반사거울을 장착하여 셀 안에서의 빛의 통과거리가 증가되도록 설계하였다. 50cm 길이의 셀 안에서 빛의 통과거리를 16m까지 늘릴 수 있도록 컴퓨터 모사에 의해 반사거울의 곡률반경 및 곡률중심, 셀 안에서의 위치 등을 산출하여 셀을 제작하였다. 빛의 경로와 광학적 특성은 모의 셀 안에서 laser beam alignment에 의해 확인하였다. 투과광의 검출에는 광전도성 PbSe센서를 사용하였으며, 센서소자는 열전냉각방식에 의해 냉각하였다. 제작된 일산화 탄소 검출기의 검출한계와 스팬 드리프트는 각각 0.24ppm과 0.03ppm(v/v)이었다.