• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.1999-2010
• /
• 2023

Undesirable flapping motion of discs can cause the failure of swing check valves in nuclear passive safety systems. Time-resolved particle image velocimetry (PIV) was employed to investigate the flow characteristics around a free-to-rotate plate and the motion response, with the Reynolds numbers, based on the hydraulic diameter of the channel, from 1.32 × 10⁴ to 3.95 × 10⁴. Appreciable flapping motion (±3.52°) appeared at the Reynolds number of 2.6 × 10⁴ with the frequency of 5.08 Hz. In the low-Reynolds-number case, the plate showed negligible flapping. In the high-Reynolds-number case, the deflection angle increased with reduced flapping amplitude. The torque from the fluid determined the flapping amplitude. In the low-Reynolds-number case, Karman vortices were absent. With increasing Reynolds numbers, Karman vortices developed behind the plate with larger deflection angles. Strong interaction between the wake flow from the leading and trailing edge of the plate was observed. Based on power spectrum density (PSD) analysis, the vortex shedding frequency coincided with the flapping frequency, and the amplitude was positively correlated to the strength of the vortices. Proper orthogonal decomposition (POD) modes evince that, in the case of appreciable motion, coherent structures exhibited a larger spatial scale, enhancing the magnitude of the external torque on the plate.

• Archives of Craniofacial Surgery
• /
• v.25 no.2
• /
• pp.90-94
• /
• 2024

Primary cutaneous mucinous carcinoma (PCMC) is a rare malignancy of the sweat glands that most commonly affects the periorbital area. It is characterized by slow growth over a prolonged period, and its morphology can be easily confused with a benign tumor, such as an epidermal cyst. Consequently, many patients experience recurrence after undergoing multiple resections. However, there are few reports concerning the surgical management of PCMC. We present two cases of PCMC originating in the periorbital area. The first case involved a 76-year-old man with a mass measuring 3.0×1.5 cm that had been increasing in size. The second case was a 61-year-old man with two masses, each measuring 1.0×1.0 cm, that were also growing. Both patients underwent wide excision with a 5-mm safety margin, which was determined based on the widest view of the cross-section of the mass on the magnetic resonance imaging. Subsequently, based on the intraoperative frozen biopsy results, both patients underwent additional excision with a 5-mm safety margin in only one direction. This report shows that, when determining the surgical margin of PCMC in periorbital area, employing imaging modalities and intraoperative frozen biopsies can be helpful for narrowing the surgical margin.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1977

This experiment was conducted in order to find out the drawing performance of a two-wheel tractor under different levels of the soil moisture and hardness, so as to obtain some basic data for improving their drawing performance. With fairly homogeneous soil, 5 levels of soil moisture contents (8, 13, 17, 20 and 23%) and 3 levels of soil hardness (0 , 2 and 4kg/$cm^2$) were selected for this experiment.The summerized results are as follows ;1. The draft force, on the hard soil (hardness ; 4kg/$cm^2$), had a distinct tendency to decrease with the increasing soil moisture. On the medium soil (hardness ; 2 kg/$cm^2$), and the soft soil (hardness ; 0kg$cm^2$), the draft force showed the highest when the moisture contents were within the range of 16-19%.But the maximum draft force, on the soft soil, was higher than that on the medium soil by 10 %. 2. The driving axle torque increased with increasing soil by 10 %. 3.The values of horizontal distance between the soil reaction point and axle shaft were within the range of 0~10cm , and it had the tendency to increase with the increasing soil moisture. Also, it s value was the largest on the hard soil and the smallest on the soft soil. 4.The tractive efficiency decreased with the increasing soil moisture. On the hard soil, the average value of tractive efficiency was higher than that on the medium soil by 19.0% and that on the soft soil was lower than that on the medium soil. 5.The traction ratio were within the range of 30 ~45%, and their changing tendency with respect to the soil moisture was similar to that in the case of the draft force. 6. The travel resistance ratio tended to increased with increasing soil moisture, and the highest value was found on the soft soil, and the lowest on the hard soil.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.39-45
• /
• 2014

Dust is mostly caused by human activity. The effect of natural factors on dust emission were studied in many research, but the little effort in researching artificial factors of dust emission. The object of study is to analysis dust emission characteristic by drop impact. Particle matter $10{\mu}m$ ($PM_{10}$) was measured by drop impact on paved soil with changing drop height, weight and drop size. Increasing drop height cause more $PM_{10}$ emission. Increasing drop weight cause more $PM_{10}$ emission but had limit weight for increasing dust emission. Because the exceed kinetic energy of drop weight penetrate the soil surface. The limit perimeter was exist that separating $PM_{10}$ emission aspect. Under limit perimeter, $PM_{10}$ emission was increasing while perimeter was increasing, but over limit perimeter showed the opposite aspect. Regression equations for estimating $PM_{10}$ with kinetic energy and perimeter were made under limit perimeter and over limit perimeter. The $R^2$ of those equations were 0.784, 0.743. The error has occurred between measured $PM_{10}$ and calculated $PM_{10}$ in the equation under limit perimeter. But using equation of case for over limit perimeter, PM10 can be estimated with kinetic energy and drop perimeter.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1409-1413
• /
• 2015

Background: According to increase in elderly populations, and change in lifestyle and cancer-causing behavior, the global burden of cancer is increasing. For prevention and control of disease, knowledge of population statistics of cancers and their trends is essential. This study aimed to investigate the epidemiology and trends of cancer in the province of Kerman: southeast of Iran. Materials and Methods: This analytical and cross-sectional study was carried out based on cancer registry data at the Disease Management Center of the Health Ministry from 2004 to 2009 in the province of Kerman in Iran. Common cancers were defined as the number of reported cases and standardized incidence rates. To compute the annual percentage change (APC), joinpoint 4.1.1.1 software was applied. Results: Of 10,595 registered cases, 45.3% (4802 cases) were in women and 56.7% (5,793 cases) occurred in men. The standardized incidence rates for both females and males were increasing during the six years studied. The most common cancers in both sexes during six years of studied were skin (13.4%), breast (9.35%), bladder (7.8%), stomach (7.45%), leukemia (7.05%), colorectal(5.57%), lung(4.92%), trachea(3.51%) and prostate(2.48%). Conclusions: Our findings revealed that the cancer incidence is demonstrating increasing trends in both sexes in the province of Kerman. This may be because of changes in lifestyle, increasing exposure to risk factors for cancer and increase of life expectancy. If this is the case, increasing public awareness of cancer risk factors is a high priority, together with introduction of large-scale screening techniques.

• Journal of Korea Foundry Society
• /
• v.17 no.1
• /
• pp.58-66
• /
• 1997

The main aim of the present study is to investigate the effects of several processing parameters on the characteristics of Fe-Al alloy preform manufactured by reactive sintering process. The processing parameters include preform composition of 25, 40, 50, 60 and 75at.%Al, compacting pressure of 10, 20 and $30kg/cm^2$, and mean Al particle size of 29, 66 and $187{\mu}m$. Mean Fe particle size was $39{\mu}m$. The density of preform processed under same compacting pressure was not affected by changing Al composition. The preform with Al compositions of 25, 40, 50 and 60at.% Al swelled after reactive sintering process, thus having lower density than the green compacts. The preform with Al compositions of 75at.%Al, however, shrinked after reactive sintering process, thus having higher density than the green compacts. Ignition temperature increased with increasing compacting pressure, and increased with increasing Al composition at the fixed compacting pressure. And adiabatic temperature decreased with increasing compacting pressure at the fixed Al composition, and increased with increasing Al composition at the fixed compacting pressure. The size of compound particles increased with increasing Al composition. Especially, The size of compound particles increased largely in the case of 75at.%Al. It was observed that 50at.%Al preform have three dimentional network structure having a homogeneous and fine decreasing Al particle size.

• Tuberculosis and Respiratory Diseases
• /
• v.70 no.2
• /
• pp.143-149
• /
• 2011

Background: Stopping medical treatment by tuberculosis (TB) patients prior to completing treatment period is a major concern in private hospitals. We evaluated the impact of public-private mix (PPM) project on increasing treatment success rate of TB in a private tertiary hospital in Korea. Methods: Starting in February 2009, TB patients treated at Dankook University Hospital received health education and case monitoring activities by specially trained public health nurses (PPM project). On a retrospective basis, we reviewed medical records and compared the treatment outcome of TB patients treated under the PPM project (PPM group) to patients treated without the PPM project (control group) between January 2008 and June 2010. In addition, we also evaluated the risk factors treatment non-completion. Results: The number of patients in the PPM group and control group were 123 (85 pulmonary TB and 38 extrapulmonary TB) and 146 (101 pulmonary TB and 45 extra-pulmonary TB), respectively. The PPM group had demographic and clinical findings comparable to those of control group. The PPM group showed a significantly higher treatment success rate (93.5%) compared to the control group (77.9%). However, development of complications, proximity to the hospital, and presence of co-morbid disease did not influence the treatment success rate. Conclusion: The PPM project was effective at increasing the TB treatment success rate. An effort to improve and to expand the PPM project is needed in private Korean hospitals.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.39-47
• /
• 2003

Phosphorescent PET/liquid color films and phosphorescent PET/disperse dyes films were prepared by melt casting method using Hot press. Then, weight ratios and exhaustion percent of films were 0.7, 1.2, 1.5, 2.0, and 2.3 wt.%. The effects of L/C and D/D contents(wt.%) of films on the thermal properties, crystal structure, H(%), brightness$(mcd/mm^2)$, morphology, and tensile properties were investigated by means of DSC and WAXD, etc. It was found that the melting temperature and crystalline diffraction peaks were not changes with increasing the liquid color contents and disperse dyes exhaustion. Also, in case of using liquid color to phosphorescent PET film, the H(%) and brightness$(mcd/mm^2)$ value were superior to phos.PET/disperse dyes film. The tensile strength and the tensile modulus were decreased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film. Also, the elongation at break was increased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1065-1072
• /
• 2010

The excavation site in the new city of inchon songdo is distributed with soft reclaimed soil and marine deposit. So, the general ground anchor is not applied to this layer of soft ground as the earth retaining support system, because of settlement. And then, Jacket pack anchor which is newly developed in order to increasing the pullout resistance by certain grout bulb formation and expansion effect in soft ground is applied to this site instead of the general ground anchor. Though the maximum horizontal displacement shows about 30mm~100mm (The maximum horizontal displacement/excavation depth$\fallingdotseq$0.32~1.0%) according to excavation sequence, generally excavation work finished stably. Also, load cell after setting shows almost increasing trend with increasing horizontal displacement. It means that the settlement of Jacket pack anchor in soft ground is good. From the result of this case, we knew that Jacket pack anchor was able to use the earth retaining support system in soft ground. Using Jacket pack anchor in soft ground, The allowance of the horizontal displacement is applied more than general value considering soil factors.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.451-460
• /
• 1998

The objectives of this study Is to evaluate the total runoff yield, peak flow and peak flow travel time depending on the urbanization, return period and rainfall patterns at the downstream of Manchon urban watershed in TaeGu City. SWM(Storm Water Management Model) is used for runog analysis based on 5 different steps of urbanization and 4 different types of Hufrs quartile according to 8 return periods. It is analyzed that the order of total runoff yield according to raiun patterns is Huffs 4, Huffs 2. Huffs 3 and Huffs 1 quartile, that of peak flow magnitude is Huffs 2, Huffs 1, Huffs 4 and Huffs 3 quartile at present development ratio. under the 60, 70, 80 and 90ft of urbanization to the 50% of urbanization by means of the rainfall patterns, the mean Increasing ratio of total runoff yield for each case is 4.55, 11.43, 16.07 and 20.02%, that of peak flow is 5.82, 13.61, 17.15 and 18.83%, the mean decreasing ratio of peak flow travel time Is 0.00, 2.44, 5.07 and 6.26%, the mean increasing ratio of runoff depth Is 4.51, 11.42, 16.02 and 20.05% respectively. the mean increasing ratio of total runoff yield by means of each and 19.71%. Therefore, as the result of this study. it can be used for principal data as to storm sewage treatment and flood damage protection planning in urban small watershed.