• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.703-753
• /
• 2016

The ratcheting behavior was studied experimentally for Z2CND18.12N elbow piping under cyclic bending and steady internal pressure. Dozens of cyclic plasticity models for structural ratcheting responses simulations were used in the paper. The four models, namely, Bilinear (BKH), Multilinear (MKIN/KINH), Chaboche (CH3), were already available in the ANSYS finite element package. Advanced cyclic plasticity models, such as, modified Chaboche (CH4), Ohno-Wang, modified Ohno-Wang, Abdel Karim-Ohno and modified Abdel Karim-Ohno, were implemented into ANSYS for simulating the experimental responses. Results from the experimental and simulation studies were presented in order to demonstrate the state of structural ratcheting response simulation by these models. None of the models evaluated perform satisfactorily in simulating circumferential strain ratcheting response. Further, improvement in cyclic plasticity modeling and incorporation of material and structural features, like time-dependent, temperature-dependent, non-proportional, dynamic strain aging, residual stresses and anisotropy of materials in the analysis would be essential for advancement of low-cycle fatigue simulations of structures.

• Smart Structures and Systems
• /
• 제9권1호
• /
• pp.1-20
• /
• 2012

In bridge engineering, maintenance strategies and thus budgetary demands are highly influenced by construction type and quality of design. Nowadays bridge owners and planners tend to include life-cycle cost analyses in their decision processes regarding the overall design trying to optimize structural reliability and durability within financial constraints. Smart permanent and short term monitoring can reduce the associated risk of new design concepts by observing the performance of structural components during prescribed time periods. The objectives of this paper are the discussion and analysis of influence line or influence field approaches in terms of (a) an efficient incorporation of monitoring information in the structural performance assessment, (b) an efficient characterization of performance indicators for the assessment of structures, (c) the ability of optimizing the positions of sensors of a monitoring system, and (d) the ability of checking the robustness of the monitoring systems applied to a structure. The proposed influence line- model correction approach has been applied to an integrative monitoring system that has been installed for the performance assessment of an existing three-span jointless bridge.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2005년도 종합학술대회
• /
• pp.78-84
• /
• 2005

As the research activities related to 'Ubiquitous Computing' whose concept was introduced by Mark Weiser are growing, RFID(Radio Frequency Identification) technology has recently gained attention as a technology to advance the ubiquitous computing and a lot of related researches are also in progress. Research works done so far are mainly linked to the situation that the research outputs apply to meet the requirements for asset tracking and data sharing with partners over supply chain by using fixed RFID readers. However, it is essential that users have access to real-time information about the tagged objects and services whenever and wherever they want in the era of ubiquitous computing, so mobile devices-including PDA, smart phone, cellular phone, etc - which are equipped with an RFID reader can be regarded as an essential terminal for users living in ubiquitous computing environment. As far as the application with mobile devices are concerned, there are many considerations due to their limited capabilities of data processing, battery consumption and so on. In this paper, we review the generic RFID network model and introduce the revised RFID network model in consideration of incorporation with mobile devices equipped with an RFID reader. Also, we derive the requirements for software embedded within an RFID- enabled mobile terminal and then discuss essential components for implementation. Moreover, we develop the applications for asset management at museum by using mobile RFID network model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.705-706
• /
• 2008

There has been, in recent years, effort to make cast copper rotors for industrial use of induction motors. Because the incorporation of copper for the conductor bars and end rings of the induction motor in place of aluminum would result in attractive improvements in motor energy efficiency. The purpose of this method is a reducing the copper loss as using higher conductivity of copper. In this paper as the single phase induction motor is studied, the stator slots and coil turn number is designed for adjusting the slot fill factor and improving its efficiency. At this time design is basis on calculation of reducing loss. And finally this paper shows that the before and after result is compared and analyzed.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.676-682
• /
• 2008

정보화시대에 진입하면서 디지털 콘텐츠 활용기술이 사회 각 분야에서 각광을 받고 있으며 이와 더불어 효율적인 콘텐츠 관리와 콘텐츠 저작권보호를 위한 관련 기술연구가 활발하게 이루어지고 있다. 그러나 기존 저작권보호를 위한 DRM기술은 단일 CMS 도메인을 기반으로 개발되고 콘텐츠 클로벌 활용이 제한되어 정보의 교류와 공유를 효율적으로 지원하지 못하는 단점이 있다. 이 논문에서는 CMS간 콘텐츠 상호운영이 가능한 계층적 통합 메타데이터를 기반으로 콘텐츠 저작권보호를 위한 DRM모델을 제안한다. 제안 모델은 동종 및 이종 CMS간 콘텐트들이 상호유통이 가능하고 또한 유통과정에서 발생되는 저작권문제를 해결하였다.

• 대한한방내과학회지
• /
• 제26권1호
• /
• pp.60-73
• /
• 2005

Objectives : The aim of this study was to evaluate the effects of Loranthus parasiticus Merr. on cell cycle and expression of related genes in HepG2 cells. Methods : The MTT assay, cell counting assay, $[^3H]-Thymidine$ incorporation assay, flow cytometric analysis, quantitative RT-PCR and western blot assay were studied. Results : In the water extract of Loranthus parasiticus Merr., inhibition of cell proliferation and DNA synthesis in HepG2 cells was seen. These inhibitory effects were due to inhibition of G l-S transition in cell cycle. After treatment with the extract, expression of cyclin D1(G1 check point related gene) was inhibited particularly in dose-dependent and time-dependent manners. Conclusion : These results suggest that the inhibition of cell cycle progression by Loranthus parasiticus Merr. in HepG2 cell is due to suppression of cyclin D1(G1 check point related gene) mRNA expression and protein synthesis.

• 환경영향평가
• /
• 제22권1호
• /
• pp.1-17
• /
• 2013

Carbon sequestration on soil is one of the counter measurements against climate change in agricultural sector. Increasing incorporation of organic fertilizer would increase soil organic carbon (SOC) but it could bring high potential of nutrient losses which would result in water quality degradation. In this paper, literature review on soil organic carbon behavior according to agricultural management is presented. The results of field experiment to identify the effect of organic and commercial fertilizer applications on SOC and runoff water quality were also presented. Field experiment confirmed increased SOC and nutrient concentrations in runoff water as application rate of organic fertilizer increase. The potential use of simulation model to develop best agricultural management practice considering carbon sequestration and water quality conservation at the same time is discussed and monitoring and modeling strategies are also suggested to achieve the goal.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.699-706
• /
• 2014

The probabilistic seismic performance of a standard Korean nuclear power plant (NPP) with an idealized isolation is investigated in the present work. A probabilistic seismic hazard analysis (PSHA) of the Wolsong site on the Korean peninsula is performed by considering peak ground acceleration (PGA) as an earthquake intensity measure. A procedure is reported on the categorization and selection of two sets of ground motions of the Tohoku earthquake, i.e. long-period and common as Set A and Set B respectively, for the nonlinear time history response analysis of the base-isolated NPP. Limit state values as multiples of the displacement responses of the NPP base isolation are considered for the fragility estimation. The seismic risk of the NPP is further assessed by incorporation of the rate of frequency exceedance and conditional failure probability curves. Furthermore, this framework attempts to show the unacceptable performance of the isolated NPP in terms of the probabilistic distribution and annual probability of limit states. The comparative results for long and common ground motions are discussed to contribute to the future safety of nuclear facilities against drastic events like Tohoku.

• 한국표면공학회지
• /
• 제39권2호
• /
• pp.82-86
• /
• 2006

Diamond films were deposited on 10.0$\times$10.0$mm^2$ pretreated (100) Si substrate using $CH_4$, $H_2$ and $O_2$ source gases in a horizontal-type microwave plasma enhanced chemical vapor deposition system. We introduced a cyclic on/off modulation of $CH_4$ and/or $O_2$ flows is a function of the reaction time during the initial deposition stage. Surface morphology and diamond quality of the films were investigated as a function of the different cyclic modulation process of the source gases flows: For the enhancement of the nucleation density, there is an optimal process for the incorporation of oxygen. Diamond qualities of the films were improved by introducing oxygen gas during the initial deposition stage.

• Structural Engineering and Mechanics
• /
• 제27권2호
• /
• pp.243-257
• /
• 2007

A numerically efficient superelement is proposed as a low degree of freedom model for dynamic analysis of rotating tapered beams. The element uses a combination of polynomials and trigonometric functions as shape functions in what is also called the Fourier-p approach. Only a single element is needed to obtain good modal frequency prediction with the analysis and assembly time being considerably less than for conventional elements. The superelement also allows an easy incorporation of polynomial variations of mass and stiffness properties typically used to model helicopter and wind turbine blades. Comparable results are obtained using one superelement with only 14 degrees of freedom compared to 50 conventional finite elements with cubic shape functions with a total of 100 degrees of freedom for a rotating cantilever beam. Excellent agreement is also shown with results from the published literature for uniform and tapered beams with cantilever and hinged boundary conditions. The element developed in this work can be used to model rotating beam substructures as a part of complete finite element model of helicopters and wind turbines.