• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.111-122
• /
• 2018

The purpose of this study was to investigate the bodice prototype method suitable for the upper body shape of old-old aged women using the 3D anthropometric data. And it was to provide the basic data for the upper body garments of old-old aged women. In the overall appearance evaluation, the B pattern was rated as 4.00, and it was evaluated as the most suitable for the bodice prototype of the old-old aged woman. The E pattern was rated lower than normal, and the L pattern and the S pattern were found to be inadequate for older female bodice prototypes. As a result of the measurement of the waist and bust air gap of bodice prototype, the air gap of the bust was not significantly different between the patterns. But the waist air gap showed the largest difference between the L pattern and the S pattern. As a result of evaluating the appearance, the amount of space in the state of 3D simulation, and the air gap, the pattern B appeared to be the most appropriate prototype for the old-old aged women's body shape. However, there is a tendency that the shoulder end point is biased toward the back, so it is necessary to set the inclination of the back shoulder line to be more gentle. Conversely, the front shoulder should be more inclined. In the case of the 3D simulation, the B pattern showed that the other parts generally fit well. In the case of the 3D simulation program used in this study, it was evaluated that it is suitable only for the normal body shape because it is impossible to set the isometric angle which is one of the characteristics of the older female body shape. A study on the bodice prototype suitable for the bent body shape should be carried out through experiments on the actual body shape of various elderly women. In order to cope with the increase of elderly people who are familiar with digital, I think it is necessary to develop an avatar that reflects the old female body shape.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.264-271
• /
• 2011

Purpose: This study evaluated retrospectively the postsurgical facial hard tissue profile of a Le Fort I osteotomy with/without posterior impaction and rigid internal fixation to correct mandibular prognathism. After observing a difference between the two groups, this measurement was used to prepare a treatment plan for 2-jaw surgery. Patients and Methods: Thirty patients who had undergone orthognathic surgery in Pusan National University Dental Hospital were enrolled in this study. Fifteen patients were treated using a Le Fort I osteotomy with posterior impaction and mandibular setback bilateral sagittal split ramus osteotomy, and the other fifteen patients were treated without posterior impaction. The preoperative (T0), immediate postoperative (T1) and six-month follow-up period (T2) cephalograms were taken and difference between T1-T0 and T2-T2 was analyzed. Results: Both groups was FH-ABp, SNB and ANB showed significant changes in the measurement, whereas only the posterior impaction group showed a change in the SN-U1, occlusal plane, posterior facial height, surgical movement difference from the L1 and B-point. There was no significant statistical change between the immediate postoperative (T1) and six-month follow-up (T2) hard tissue analysis in the two groups. Conclusion: A Le Fort I osteotomy with posterior impaction is considerable for patients with a flat occlusal plane angle, large posterior facial height, prominent B-point, pogonion and labioversed incisal inclination if the indications are well chosen.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.175-183
• /
• 2000

The purpose of this study was to identify the compensatory adaptation of dentoalveolar structure according to the various skeletal relation through the statistical correlation between the anteroposterior, vertical skeletal and dentoalveolar relation. For this study, the sample were consisted of 101 adult subjects (51male and 50 female, mean age; male 23.6 years, female 21.5 years) who had good occlusion with the range of normal overjet and overbite and acceptable Angle's class I molar relationship which had not been related orthodontically The results were as follows : 1. Even though acceptable normal occlusion, the range of measurements which represent anteroposterior, vertical skeletal relation and dentoalveolar relation were very wide. 2. Upper and lower incisor axis were significantly correlated with anteroposterior skeletal relation, which means the mote lingual inclination of upper anterior teeth and the more labial inclination of lower anterior teeth according to the more anterior position of mandible to the maxilla (P<0.01). 3. Upper and 1ower anterior alveolar bone height was statistically correlated with the lower anterior vertical skeletal height. 4. Upper and 1ower alveolar bone height were not correlated with anteroposterior skeletal relation (P>0.05). 5. The correlation between the incisor axis and vertical skeletal was more closely related in upper anterior teeth than the lower anterior teeth. To summarize the above results, even though acceptable normal occlusion, skeletal and dentoalveolar relation was very widely ranged, and there were close relationship between the anteroposterior skeletal relation and the inclination of upper and lower anterior teeth and between the vertical skeletal relation and upper and lower anterior alveolar bone height. These finding can be concluded as compensatory adaptation to the different skeletal relationship.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.189-199
• /
• 2015

Our country's leading granite weathered soil of the ground slope failures that occur in cutting slope most cases, it does not require in-depth to the shear strength most of the surface layer is affected by weathering (1~2 m) at a shallow depth close to the ground, it is important to identify the reliability. Based on the result obtained in actual field investigation, the field slope type was classified by each type of wedge slope, Infinite slope, finite slope -I and finite slope -II, and the slope stability was examined respectively. In addition, using the numerical analysis results, the relationship between the slope inclination angle and safety factor was analyzed and it tried to offer basic data to which the stability in the field slope was able to be estimated by analyzing the safety factor change of the slope according to the slope type. In this study, classified into four types of natural slope, safety factor estimation method by slope types is proposed through the numerical analysis. However, some limit exists in generalizing in this research because it does not test various case studies. Therefore, the case study of a wide range of various sypes to assess the safety of various types slope can be made, accommodate a wide range of field conditions reasonable risk evaluation criteria may be derived.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.82-110
• /
• 2021

This study specifically examined the date of the black glazed bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" of Jian ware, one of the key research topics related to the bowls. The results of this study can be summarized as follows. Jian Kiln produced various shapes of black glazed bowls, but almost all of the inscriptions of "Gongyu (供御)" or "Jinzhan (進琖)" are found only in two certain type bowls: Type I, the Shukou type bowls (束口碗), or Type II, the Piekou type bowls (撇口碗). Of these, there are significantly more of the former in existence. For Type I bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)", the mouth of the bowls is slightly evaginated outwards, and the inclination angle of the side slope is about 50°. The shape feature, Shukou (束口) is formed which is slightly indented around the bowl about 0.3~0.5cm below the mouth of bowl. And the height of the bowls is relatively low compared to other Type I black glazed bowls produced by Jian Kiln, so the height divided by the diameter is 0.5 or less. There is little difference in shape between the black glazed bowls marked with "Gongyu (供御) and those with "Jinzhan (進琖)". However, taking into consideration the excavation situation of both type bowls, the former is considered to be ahead of the latter in terms of production date. On the other hand, the black glazed bowls of Jian ware, which have the same shape features as the Type I bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" have not been found in the tombs dating from the end of the 12th to the beginning of the 13th century from which typical Jian kiln black glazed bowls of the same type were excavated. For the Hakata site (博多遺址) in Japan, the black glazed bowls with such a shape feature were excavated from early 12th century sites, rather than from the late 12th to early 13th century sites at which the typical black glazed bowls of Jian kiln were found. Considering that the black glazed bowls from Fujian province were imported into Hakata with almost no time gap, it is very unlikely that the production time of Type I black glazed bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" will deviate from the early 12th century. In conclusion, it is considered that the black glazed bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" of Jian ware were produced in the early 12th century.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.549-562
• /
• 2017

The US railroad network carries 40% of the nation's total freight. Railroad bridges are the most critical part of the network infrastructure and, therefore, must be properly maintained for the operational safety. Railroad managers inspect bridges by measuring displacements under train crossing events to assess their structural condition and prioritize bridge management and safety decisions accordingly. The displacement of a railroad bridge under train crossings is one parameter of interest to railroad bridge owners, as it quantifies a bridge's ability to perform safely and addresses its serviceability. Railroad bridges with poor track conditions will have amplified displacements under heavy loads due to impacts between the wheels and rail joints. Under these circumstances, vehicle-track-bridge interactions could cause excessive bridge displacements, and hence, unsafe train crossings. If displacements during train crossings could be measured objectively, owners could repair or replace less safe bridges first. However, data on bridge displacements is difficult to collect in the field as a fixed point of reference is required for measurement. Accelerations can be used to estimate dynamic displacements, but to date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate total transverse displacements of a railroad bridge under live train loads using acceleration and tilt data at the top of the exterior pile bent of a standard timber trestle, where train derailment due to excessive lateral movement is the main concern. Researchers used real bridge transverse displacement data under train traffic from varying bridge serviceability levels. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic using a shake table for the input of train crossing data collected from the field into a laboratory model of a standard timber railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. Various readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. An average peak error of 10% and a root mean square error average of 5% resulted, concluding that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.594-601
• /
• 2011

Purpose: The frontal sinuses are a pair of triangularly shaped, air-filled chambers lined by mucoperiosteum and located between the inner and outer tables of the frontal bone. Until recently, our understanding of gender variations in craniofacial anatomy has been chiefly built upon anthropometric studies, which typically employ facial surface measurements or plain film radiography. The aim of this study i to determine the sizes of the frontal sinus in both sexes in Koreans. Methods: 95 Korean subjects who underwent maxillofacial 3-Dimensional computed tomography (CT) between January 2009 and December 2009 were enrolled. Frontal sinus dimensions and forehead measurements were taken at midline and at 10, 20, and 30 mm to the left and right of midline using sagittal, coronal, and axial images. The data was analyzed for significant differences between measurements made at the selected points in the frontal sinus, for left to right variations, for gender variations, and for racial differences. Results: The mean thickness of the anterior table ranged from 2.31 to 3.23 mm. Mean anteroposterior depth of the frontal sinus ranged from 7.38 to 9.45 mm and did not vary significantly at any distance from midline. Frontal sinus height was greatest at midline (mean=29.24 mm) and progressively lessened at lateral distances. Mean total width at the level of the supraorbital ridge was 53.66 mm. For all measurements, no significant left to right variation was noted. Comparing the sexes, males were found to have greater dimensions in most frontal sinus measurements, though these differences were only found to be significant at or close to midline. The male forehead was marked by more acute nasofrontal angle ($133.3^{\circ}$ versus $141.6^{\circ}$) and a steeper posterior forehead inclination ($14.9^{\circ}$ versus $7.7^{\circ}$). Conclusion: Using CT imaging, forehead and frontal sinus dimensions have been described. Generally, males had larger overall frontal sinus dimensions. And Korean had similar sized frontal sinus to Caucasian in height and width. But in AP distance Korean had lesser measurement. The result of this study may be helpful in the comprehension of normal size of frontal sinus in Korean.

• The korean journal of orthodontics
• /
• v.52 no.2
• /
• pp.150-160
• /
• 2022

Objective: To provide reliable prediction models based on dentoskeletal and soft tissue variables for customizing maxillary incisor positions and to optimize digitalized orthodontic treatment planning. Methods: This study included 244 Chinese women (age, 18-40 years old) with esthetic profiles after orthodontic treatment with fixed appliances (133 in group I: 1° ≤ The angle between the nasion [N]-A point [A] plane and the N-B point [B] plane [ANB] ≤ 4°; 111 in group II: 4° < ANB ≤ 7°). Dental, skeletal, and soft tissue measurements were performed on lateral cephalograms of the participants. Correlation and multiple linear regression analyses were used to determine the influence of dentoskeletal and soft tissue variables on maxillary incisor position. Results: The ideal anteroposterior position of the maxillary incisor varied between sagittal skeletal patterns. The position of the maxillary incisor correlated with the sagittal discrepancy between the maxilla and the mandible (ANB), protrusion of the midface, nasal tip projection, development of the chin, and inclination of both the maxillary and mandibular incisors. Distance from the maxillary central incisor to nasion-pogonion plane predicted using multiple linear regression analysis was accurate and could be a practical measurement in orthodontic treatment planning. Conclusions: Instead of using an average value or norm, orthodontists should customize a patient's ideal maxillary incisor position using dentoskeletal and soft tissue evaluations.

• Coupled systems mechanics
• /
• v.13 no.3
• /
• pp.201-217
• /
• 2024

This study aims to develop a new model to obtain the minimum area in circular isolated footings with eccentric column taking into account that the surface in contact with the ground works partially in compression, i.e., a part of the contact area of the footing is subject to compression and the other there is no pressure (pressure zero). The new model is formulated from a mathematical approach based on a minimum area, and it is developed by integration to obtain the axial load "P", moment around the X axis "M_x" and moment around the Y axis "M_y" in function of σ_max (available allowable soil pressure) R (radius of the circular footing), α (angle of inclination where the resultant moment appears), y₀ (distance from the center of the footing to the neutral axis measured on the axis where the resultant moment appears). The normal practice in structural engineering is to use the trial and error procedure to obtain the radius and area of the circular footing, and other engineers determine the radius and area of circular footing under biaxial bending supported on elastic soils, but considering a concentric column and the contact area with the ground works completely in compression. Three numerical problems are given to determine the lowest area for circular footings under biaxial bending. Example 1: Column concentric. Example 2: Column eccentric in the direction of the X axis to 1.50 m. Example 3: Column eccentric in the direction of the X axis to 1.50 m and in the direction of the Y axis to 1.50 m. The new model shows a great saving compared to the current model of 44.27% in Example 1, 50.90% in Example 2, 65.04% in Example 3. In this way, the new minimum area model for circular footings will be of great help to engineers when the column is located on the center or edge of the footing.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.569-584
• /
• 1997

The present study assessed the effects of Rapid Maxillary Expansion on head posture and hyoid bone position. For this study, 32 Angle's class III patients - hellman 3c $\~$ adult stage, mean age 12y9m - were selected and divided into two groups, A,B according to craniocervical angulation. Craniocervical angulation Increased in Group A and decreased in Group B after the therapy. And 23 Angle's class I persons $\~$ same hellman stage, mean age 12y7m $\~$ were selected (or the control group. Cephalometric analysis of skeletal pattern, pharyngeal space, head posture, hyoid bone position was performed. The results were as follows, 1. Comparison of skeletal pattern and pharyngeal space 1) All two groups(A,B) had Mandibular plane inclined inferiorly and no pharyngeal space change was obseved after RME therapy 2) Skeletal pattern and pharyngeal space of Group A, B were normal before and after treatment. 2. Comparison of head posture 1) Craniocervical angulation of Group A was increased after treatment. That of Group B was decreased and mandibular plane was inclined inferiorly after treatment. 2) Before treatment, craniocervical inclination was normal in Group A but larger than normal in Group B. After treatment, all two groups(A, B) had normal craniocervical angulation. 3. Comparison of hyoid bone position 1) After treatment, long axis of hyoid in Group A, B was not changed. Antero- posteriorly, hyoid position was changed posteriorly in Group A but no change was founded in Group B after treatment. Vertically, hyoid bone position were not changed in two groups except increase in APHFH in Group A after treatment 2) Long axis of hyoid bone was normal in Group A, B before and after treatment. Anteroposteriorly, hyoid bone position was more anterior than Group B, C before treatment but all the position of two groups had normal position after treatment. Vertical position of hyoid bone was normal in all two groups before and after treatment.