• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.235-239
• /
• 2005

In this research, we investigated the frequency characteristic of low-velocity impact induced damage signals on graphite/epoxy composite laminates using high-speed fiber Bragg grating(FBG) sensor system. Appling the FBG sensors to damage assessment, we need to study the response of FBG sensors as the damage signals of the different incident angles because FBG shows different directional sensitivity. In order to discriminate an impact induced damage signal from that of undamaged case, drop impacts with different energies were applied to the composite panel with different incident angle to the FBG sensor. Finally, detected impact signals were compared using frequency distributions of wavelet detail components in order to find distinctive signal characteristics of composites delamination.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.1-9
• /
• 2010

본 연구는 유고로 인한 대기행렬, 통행시간과 같은 혼잡정보를 예측하여 제공하는 것을 목표로 하며, 이것은 교통시설 이용자와 운영자 모두에게 효율적인 대안선택 및 운영을 위한 중요한 요소로 활용된다. 이러한 예측된 사고영향 정보의 제공으로 인하여, 이용자는 유고 구간에 대한 정보를 사전에 인지하여 지체를 최소화 할 수 있고, 운영자는 현재 유고영향을 받을 것으로 예상되는 구간을 효율적으로 관리할 수 있을 것이다. 본 연구에서는 연속류 본선구간에서 단기예측기법을 적용한 유고영향 예측모형을 제안하였다. 본 연구에서 제안한 모형은 MARE를 통하여 상대적인 오차를 비교분석하여, 예측력이 뛰어난 모형을 정립하였다. 본 연구를 시작으로 미시적인 사고영향 예측 모형이 개발된다면 사고발생 시 지체를 최소화하고 사회적인 비용을 줄일 수 있을 것이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.303-308
• /
• 2003

In this paper, wave numerical modeling was experimented for the analysis of impact factors for the wave transmission as the incident wave and topographic conditions in the narrow channel sea. Recently, Although the results of many researcher for the wave modelling, numerical equations have limited to simulation of wave transformation effects. Despite of thispresent problems, the models was used to design the coastal structures in barrow channel sites. Finally, this paper estimated the wave model(mild slope eq. model) as the analysis of the wave energy transmission according to changing of impact factors(width of channel, bottom slope in channel, incident wave angle, wave period). As the results of numerical experiment, the major impact factors which influence to wave energy transmission were the width of channel and incident wave direction. But in the case that the width of channel is larger than 3L(L=Length of wave), the reduction of wave energy was small.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.93-101
• /
• 2013

The incident bore impact loads acting on a tall structure is simulated using the refined Moving Particle Simulation (MPS) method. The particle method is more feasible and effective than conventional grid-based methods for the violent free-surface problems. In the present study, the simulation results for the temporal change of the hydrodynamic force on the structure and longitudinal velocity component around the structure are compared with the experiments (Radd and Bidoae, 2005). And the mitigation effects by installation of various obstacles in front of the main structure are investigated and discussed form the simulation results.

• 한국ITS학회 논문지
• /
• 제20권4호
• /
• pp.46-56
• /
• 2021

돌발상황으로 인한 비반복정체로 발생하는 높은 교통비용과 혼잡을 효과적으로 해소하기 위해서 돌발상황 처리시간을 예측하는 것은 중요하다. 본 연구에서는 인공신경망을 활용한 예측모델 개발을 위해 국내 도로상황에 적합한 돌발상황 처리시간 영향요인을 분석하고, 이를 학습데이터로 생성하였다. 기존 연구에서 장시간 소요되는 돌발상황 처리시간에 대한 과소 예측 문제가 발생하여 이에 대한 해결방안으로 본 연구에서는 SMOGN기법을 적용한 오버샘플링 학습데이터를 생성하여 이를 모델에 적용하였다. 그 결과 SMOGN기법을 적용한 DNN모델이 MAE 18.3분으로 연구 과정에서 구축된 모델 중 가장 높은 정확도로 돌발상황 처리시간을 예측하여, 기존에 개발된 예측모델의 한계점을 보완할 수 있을 것으로 기대한다.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.40-44
• /
• 2007

This paper presents the experimental results on slamming phenomenon. The air pressure cylinder was used to ensure repeatability of the impact. The results showed that the adopted experimental technique was excellent in terms of repeatability, compared to that of the free drop tests. The pressure time histories, magnitude of peak pressure and the behavior of jetspray were obtained. The flat specimen was tested for various incident angles. To estimate the incident speed of the specimen, a high-speed camera was used. The high-speed camera was also a useful tool in understanding the behavior.

• 디지털융복합연구
• /
• 제10권6호
• /
• pp.205-211
• /
• 2012

허베이스피리트호 사고로 인해 원유 $12,547k{\ell}$가 해상에 유출되어 총 4만여 가구의 주민들이 피해를 입었으며, 태안군을 포함한 11개 시 군이 특별재난구역으로 선포되었다. 이러한 대형 유류오염사고는 자연환경파괴 뿐만 아니라 지역의 주변환경 변화에 중대한 영향을 주게 된다. 본 연구에서는 허베이스피리트호 유류오염사고 피해가 가장 큰 지역인 태안을 중심으로 유류오염사고가 피해지역 주변환경에 미치는 영향을 조사 분석하였다. 조사항목은 크게 인구변화, 지역경제변화, 주민건강영향, 지역사회갈등 등으로 구분하여 수행하였다. 이러한 분석결과는 향후 유류사고 발생시 피해지역에 미치는 직 간접적인 영향을 예측하고 정부의 효율적인 정책방안을 수립하는데 매우 중요한 요소로 활용될 수 있을 것이다.

• 한국해양공학회지
• /
• 제19권4호
• /
• pp.35-41
• /
• 2005

There has been increasing offshore oil exploration, drilling, and production activities, as well as a huge amount of petroleum being transported by tankers and pipelines through the ocean and costal environment. Assessment must be made of the potential risk of damage resulting from the exploration, development and transportation activities. This is achieved through predictive impact evaluations of the fate of hypothetical or real oil spills. VVhen an oil spill occurs, planning and execution of cleanup measures also require the capability to forecast the short-term and long-term behavior of the spilled oil. A great amount of effort has been spent by government agencies, oil industries, and researchers over the past decade to develop more realistic models for oil spills. Numerous oil spill models have been developed and applied, most of which attempt to predict the oil spill fate and behavior. For an actual contingency planning, the oil fate and behavior model should be combined with an oil spill incident model, an environmental impact and risk model and a contingency planning model. The purpose of this review study is to give an overview of existing oil spill models that deal with the physical, chemical, biological, and socia-economical aspects of the incident, fate, and environmental impact of oil spills. After reviewing the existing models, future research needs are suggested. In the study, available oil spill models are separated into oil spill incident, oil spill fate and behavior, environmental impact and risk, and contingency planning models. The processes of the oil spill fate and behavior are reviewed in detail and the characteristics of existing oil spill fate and behavior models are examined and classified so that an ideal model may be identified. Finally, future research needs are discussed.

• Steel and Composite Structures
• /
• 제17권6호
• /
• pp.891-906
• /
• 2014

This study aims to present a three dimensional finite element model to investigate the wave propagation in a concrete filled steel tubular column (CFSC) due to transient impact load. Both the concrete and steel are regarded as linear elastic material. The impact load is simulated by a semi sinusoidal impulse. Besides the CFSC models, a concrete column (CC) model is established for comparing under the same loading condition. The propagation characteristics of the transient waves in CFSC are analyzed in detail. The results show that at the intial stage of the wave propagation, the velocity waves in CFSC are almost the same as those in CC before they arrive at the steel tube. When the waves reach the column side, the velocity responses of CFSC are different from those of CC and the difference is more and more obvious as the waves travel down along the column shaft. The travel distance of the wave front in CFSC is farther than that in CC at the same time. For different wave speeds in steel and concrete material, the wave front in CFSC presents an arch shape, the apex of which locates at the center of the column. Differently, the wave front in CC presents a plane surface. Three dimensional effects on top of CFSC are obvious, therefore, the peak value and arrival time of incident wave crests have great difference at different locations in the radial direction. High-frequency waves on the waveforms are observed. The time difference between incident and reflected wave peaks decreases significantly with r/R when r/R < 0.6, however, it almost keeps constant when $r/R{\geq}0.6$. The time duration between incident and reflected waves calculated by 3D FEM is approximately equal to that calculated by 1D wave theory when r/R is about 2/3.

• 터널과지하공간
• /
• 제19권6호
• /
• pp.545-557
• /
• 2009

단계별 손상에 따른 취성재료의 동적손상메커니즘을 파악하고자 국내암석을 대상으로 스플릿 홉킨슨 압력바 시스템을 이용한 단계적 충격하중실험을 수행하였다. 실험시료 내 동적손상을 평가하기 위하여 고해상도 X-ray 단층촬영 시스템을 적용하였다. 그 결과 낮은 충격하중에서는 시료 내 전반적으로 축방향 균열 즉 수직균열이 발생하지만, 충격속도가 증가함에 따라 시료와 입사바 또는 전달바와의 접촉면에 구속효과가 발생하여 입사바와의 접촉면 중심부에 균열이 사라지는 경향을 보였다. 그러나 구속력을 적게 받는 시료의 원주표면 부근에서는 박리균열을 보였다.