• 한국수소및신에너지학회논문집
• /
• 제12권3호
• /
• pp.191-199
• /
• 2001

In this paper molecular dynamics simulations have been carried out to investigate energy and momentum transfer of hydrogen ions impacted on the Ni (100) surface with $45^{\circ}$ and $90^{\circ}$ incident angles. The initial kinetic energies of the hydrogen ion were ranged from 100 eV to 1,600 eV to study the layer-by-layer energy variation as a dependence of incident energies and angles. At low incident energies, the scattering energy transfer is dominated by the normal motion of surface layers due to thermal vibrations and multiple collision effects. For higher incident energies, the scattering energy transfer in a normal direction is greater than that in a parallel direction. In the case of penetration, the amount of transferred energies do not affect much on Ni layers at low incident energy. It was found channeling effects through Ni layers with increasing incident energies.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4022-4029
• /
• 2022

We investigated the possibility of using graphene for control of hydrogen isotopes by exploring adsorption, reflection, and penetration of hydrogen isotopes on graphene using molecular dynamics. Reflection is the dominant interaction when hydrogen isotopes have low incident energy. Adsorption rates increase with increasing incident energy until 5 eV is reached. After 5 eV, adsorption rates decrease as incident energy increases. At incident energies greater than 5 eV, adsorption rates increase with the number of graphene layers. At low incident energies (<1 eV), no isotopic effects on interactions are observed since the predominant interaction is derived from the force of π electrons. Between 1 eV and 50 eV, heavier isotopes exhibit higher adsorption rates and lower reflection rates than lighter isotopes, due to the greater momentum of heavier isotopes. Adsorption rates are consistently higher when the incident angle of the impacting atoms is smaller between 0.5 eV and 5 eV. At higher energies (>5 eV), larger incident angles lead to higher reflection and lower penetration rates. At high incident energies (>5 eV), crumpled graphene has higher adsorption and lower penetration rates than wrinkled or unwrinkled graphene. The results obtained in this research study will be used to develop novel nanomaterials that can be employed for tritium control.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.3-7
• /
• 2009

The amount of incident rays over inclination according to direction has been widely utilized as important data in installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.62-69
• /
• 2019

Korean shipbuilding companies have taken many efforts for safety over the years by developing Health, Safety & Environment (HSE) Management Systems, Procedures, Training, and studying Programs for prevention of incidents. As a result, the shipbuilding industry has succeeded in reducing overall injury rates. Nevertheless, the industry also noticed that incident rates are still not at zero and more importantly, serious injuries and fatalities are still occurring. One factor that may be attributing to this is the lack of managing potential severity during incident investigations, most incident investigations are implemented based on the actual result. Generally, each shipbuilding company develops their customized incident investigation programs and these are also commonly being focused on actual result. This study aimed to develop a shift in strategy toward safety to classify the criteria of potential severity from any incidents and manage that to prevent any recurrence or causing any serious injuries or fatalities in the shipbuilding industry. Several global energy companies have already developed potential severity management tools and applied them in their incident investigations. In order to verify the necessity of improvement for current systems, a case study and comparative analysis between a domestic shipbuilding company and several global energy companies from foreign countries was implemented and comparison of two incident investigation cases from specific offshore projects was conducted to measure the value of a potential severity system. Also, a checklist was established from the data of fatalities and serious injuries in recent 5 years that occurred in Korea shipbuilding industry and a proposal to verify high potential incidents in the incident investigation process and comparative analysis between the assessment by appling proposed checklist and the assessment from a global energy company by using their own system was implemented. As a measure to prevent any incidents, it is required to focus on potential severity assessment during the incident investigation rather than to only control actual result. Hence, this study aims to propose a realistic plan which enables to improve the existing practices of incident investigation and control in the shipbuilding industry.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.47-54
• /
• 2009

The amount of incident rays over inclination according to direction has been widely utilized as important data m installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.

• 한국태양에너지학회 논문집
• /
• 제21권3호
• /
• pp.19-24
• /
• 2001

The amount of incident solar rays on inclined surfaces with various directions has been widely utilized as important data in installing solar collector, hot water system, and photovoltaic module, and designing solar buildings and house. This is because the performance of the solar energy applied systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been peformed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in designing optimal solar systems.

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.19-25
• /
• 2004

The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing photovoltaic modules. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, an4 the solar azimuth angles are needed for these solar photovoltaic systems. This is because the performance of the solar photovoltaic systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the an91e of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal photovoltaic modules.

• 전자공학회논문지D
• /
• 제35D권12호
• /
• pp.59-67
• /
• 1998

본 논문에서는 몬테카를로 방식을 사용하여 이온의 에너지에 대한 타겟 원자의 스퍼터율(Sputter Yield), 이온의 주입 각도에 대한 스퍼터율, 이온의 주입에 따른 타겟 원자의 발산 분포를 3차원으로 시뮬레이션 하였다. 중(중)이온으로 (Ar/sup +/)을 사용하였고, 경(輕)이온으로 (H/sup +/)을 사용하여 10 eV에서 100 KeV 영역의 에너지에 따른 스퍼터율을 계산하였다. 또한, 스퍼터 타겟 물질로서 Cu, Al을 사용하여 계산하였고, 실험치와 일치함을 확인하였다. 스퍼터율은 입사 이온의 에너지가 증가함에 따라 증가하는 경향을 보이지만, 임계점 이후에는 점차적으로 감소하는 경향을 보였다. 중이온에 의한 스퍼터에서는 임계점이 10 KeV 영역이었고, 경이온에 의한 스퍼터에서는 1 KeV 이하 영역이었다. 또한, 이온의 주입 각도에 따라서 타겟의 스퍼터율은 점차적으로 증가하였고, 68° 부근에서 최대 스퍼터율을 기록하였다. 이온의 주입 각도에 따른 타겟 원자의 분포도에서는 각도가 커짐에 따라서 타겟 표면 법선 방향으로 방출되는 원자의 수가 많아짐을 확인하였다. 본 연구에서는, CRAY T3E 슈퍼컴퓨터에서 시뮬레이션을 수행하였으며, 구현된 몬테카를로 스퍼터 시뮬레이터의 GUI(Graphic User Interface) 환경을 구축하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.208-213
• /
• 2008

Since The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing solar flat-plate collectors. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal system is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal solar flat-plate collectors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.279-285
• /
• 1997

In this paper, the validity for the application of the diffuse sound field theory to the real sound filed, especially on the bounding surfaces of the rooms, was studied. Numerical simulations using ray tracing technique for two models, namely spheres and a reverberant room, were performed. Calculation results show that the distribution of the incident sound energy vs incident angles is approximated to Gaussian distribution, not to the uniform distribution.