• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1049-1057
• /
• 2017

In-vehicle multimedia systems are one of the most important factors in the automotive industry. Especially, multimedia systems are more important in advanced commercial vehicles such as premium express buses. In this paper, we proposed a multimedia streaming system architecture using MEP(MOST Ethernet Packets) for premium express buses based on MOST150. We have designed and implemented the prototype of proposed multimedia streaming system. We have designed a board based on i.MX6 to operate a proposed multimedia streaming system. The software has designed a multimedia system for premium express buses based on Android which is an open source platform. MOST(Media Oriented Systems Transport) is a high-speed multimedia network technology for in-vehicle multimedia system. The MOST network is able to manage up to 64 devices and ring topology is used basically. In addition, the MOST Network meets EMI(Electro-Magnetic Interference)/ EMC(Electro-Magnetic Compatibility) requirements because it uses plastic optical fibers(POF).

• Journal of Internet of Things and Convergence
• /
• v.2 no.1
• /
• pp.35-40
• /
• 2016

One of the next generation of automotive V2V communication technology is a core technology for next-generation ITS as a technique used for communications between the vehicle. Looking at the existing V2V communication using the pseudonym certificate authentication service structure to meet the security requirements for privacy protection. Since the issuance of multiple certificates when needed authority in issuing and managing to use the pseudonym certificate issued once and it takes a lot of time. In this paper, we present the method utilizing a vehicle ID to meet the security requirements for the privacy protection without the use of a pseudonym certificate.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.29-33
• /
• 2015

The multidisciplinary design optimization (MDO) of a launch vehicle (LV) with a hybrid rocket engine (HRE) was carried out to investigate the ability of an HRE for a single-stage LV. The non-dominated sorting genetic algorithm-II (NSGA-II) was employed to solve two design problems. The design problems were formulated as two-objective cases involving maximization of the downrange distance over the target flight altitude and minimization of the gross weight, for two target altitudes: 50.0 km and 100.0 km. Each objective function was empirically estimated. Several non-dominated solutions were obtained using the NSGA-II for each design problem, and in each case, a trade-off was observed between the two objective functions. The results for the two design problem indicate that economical performance of the LV is limited with the HRE in terms of the maximum downrange distances achievable. The LV geometries determined from the non-dominated solutions were examined.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.69-74
• /
• 2010

As a part of development process of the COMS, an acoustic vibration test was performed in order to verify that the COMS is safe from the acoustic loads coming from the Ariane-5ECA launch vehicle when it is launched. In this paper, the acoustic vibration test preparation which was performed during the development of the COMS is explained, and through the evaluation of the test results, it was verified whether the COMS is safe from the acoustic load that the COMS will experience during the launch. Through detail evaluation of the acoustic loads on the solar array, Ka band communication payload antenna and feed, GOCI(Geo-Stationary Ocean Color Imager), MI(Meteorological Imager), it was confirmed that the COMS is safe from the acoustic loads from launch vehicle.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.480-497
• /
• 2012

As a new business concept, machine-to-machine (M2M) communications are born from original telemetry technology with the intrinsic features of automatic data transmissions and measurement from remote sources typically by cable or radio. M2M includes a number of technologies that need to be combined in a compatible manner to enable its deployment over a broad market of consumer electronics. In order to provide better understanding for this emerging concept, the correlations among M2M, wireless sensor networks, cyber-physical systems (CPS), and internet of things are first analyzed in this paper. Then, the basic M2M architecture is introduced and the key elements of the architecture are presented. Furthermore, the progress of global M2M standardization is reviewed, and some representative applications (i.e., smart home, smart grid and health care) are given to show that the M2M technologies are gradually utilized to benefit people's life. Finally, a novel M2M system integrating intelligent road with unmanned vehicle is proposed in the form of CPS, and an example of cyber-transportation systems for improving road safety and efficiency are introduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.473-478
• /
• 2008

WAVE is a short-to-medium range communication standard that supports both public safety and private operations in roadside-to-vehicle and vehicle-to-vehicle communication environments. The core technology of physical layer in WAVE is orthogonal frequency division multiplexing (OFDM), which is sensitive to timing synchronization error. Besides, minimizing the latency in communication link is an essential characteristic of WAVE system. In this paper, a robust, low-complexity and small-latency timing synchronization algorithm suitable for WAVE system and its efficient hardware architecture are proposed. The comparison between proposed algorithm and other algorithms in terms of computational complexity and latency has shown the advantage of the proposed algorithm. The proposed architecture does not require RAM (Random Access Memory) which can affect the pipe lining ability and high speed operation of the hardware implementation. Synchronization error rate (SER) evaluation using both Matlab and FPGA implementation shows that the proposed algorithm exhibits a good performance over the existing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1078-1084
• /
• 2010

The tracking performance of a big parabola tracking antenna system for tracking and receiving of the signal from the vehicle is impacted by many factors of the internal and the external of the system. In this paper, we analyze the tracking error due to the radio refraction in the application of the tracking and positioning of the vehicle by using radio frequency. The real measurement data are used for the analysis which had been acquired by using GPS and the tracking systems of C- and S-band frequencies in NARO Space centre. To verify the correlation between the tracking errors measured and the radio refraction, we review the error factors and the accuracies of the tracking systems, and the characteristics of the refractivity. The analysis shows that there are angular errors which are due to the radio refraction and not to be neglected, compared to the accuracies of the tracking systems, in case of low elevation angle less than 10 degrees. Also, the tracking errors depend on the target altitude as well as the elevation angle for the case of the target in the troposphere. It is recommended to correct the tracking angle considering the target altitude and elevation angle for the precise target positioning.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.30-41
• /
• 2006

This paper proposes an e-logistics system supporting efficient vehicle moving trajectory management. Recent advances in wireless communications have given rise to a number of location-based services including logistics vehicle tracking, cellular phone user's location finding, and location-based commerce. Logistics systems typically entail tracking vehicles for purposes of the logistics center knowing the whereabouts of the vehicles and/or consignments. Moreover, storing and managing location trajectory of continuously moving vehicles and consignments is necessary for supporting efficient logistics plan and consignment. The proposed system is able to manage spatial objects in GIS as well as logistic information in the mobile environment. And for the efficiently managing and retrieving of transporting trajectory of logistics, we extend previous moving object indexing method, TB-Tree, to use multi-version framework and evaluate data updating performance. It is able to apply the proposed method to develop mobile contents services based on continuously changing location of moving object in the mobile environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1691-1699
• /
• 2014

IEEE developing WAVE specifications are able to support V2V and V2I wireless communications, and these functionalities can be used to enhance vehicle operational safety. To overcome any security weaknesses that are inherent in wireless communications, WAVE specification should support message encryption and authentication functions. In this study, we have implemented WAVE security algorithms in IEEE P1609.2 with openssl library and C language. We have verified the normal operation of implemented software, using the test vectors of related specifications, and measured their performance. Our software is platform independent, and can be used for the full implementation of WAVE specification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.189-196
• /
• 2012

A WAVE(Wireless Access for Vehicular Environment) system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. However, the scrambler bit operation of WAVE system becomes less efficient in the organizations of software and hardware design because the parallel processing is impossible. Although scrambler algorithm proposed in this paper has different processing speed depending on input data 8 bit, 16 bit, 32 bit, and 64 bit. it improves the processing speed of the operation because it can make parallel processing possible depending on the input unit.