• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.111-115
• /
• 1999

The structural characteristics of an epitaxial $BaTiO_3$ film on MgO(001) grown by sputtering were studied as a function of temperature using in-situ, real time synchrotron x-ray scattering experiments. We found that the as-grown film was single c-domain but strained at room temperature and tetragonally distorted with the c-axis normal to the film surface. Interestingly, its lattice parameters were found to be expanded in both the in-plane and the out-of -plane directions, i.e. biaxially, comparing with those of a bulk $BaTiO_3$ . More importantly, as it was heated up to $600^{\circ}C$, the tetragonal structure was kept up through without and any phase transition, which is usually observed in other epitaxial ferroelectric thin films.

• Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.71-78
• /
• 2005

A series of column experiments was conducted to develop a monitoring system for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone were obtained by converting the normalized intensity into ozone concentration. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of soil organic matter (SOM). However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.9
• /
• pp.818-826
• /
• 2001

In this study, in-situ performance test of a wet surface finned-tube evaporator of an air source heat pump which has a rating capacity of 20RT is carried out. Since test conditions, such as indoor and outdoor air conditions cannot be controlled to satisfy the standard test conditions, experiments are done with the inlet air conditions as they exist, From the experimental data, air side heat and mass transfer coefficients were calculated by the well known heat and mass transfer analogy and tube-by-tube method. since current procedure underpredicted the experimental sensible heat factor(SHF), a proper empirical parameter was introduced to predict the experimental data with satisfactory results. This study provides the method of evaluating the heat and mass transfer coefficients of a wet surface finned-tube evaporator of which in-situ performance test in necessary.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.144-147
• /
• 2004

Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data. The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length. This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and landbased RADAR data, operated by the local Authority of South Korea, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded. Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of 7 kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.96-99
• /
• 2019

Atomic layer etching (ALE) is one of the most promising techniques in the semiconductor industry. Since ALE has to be precisely controlled on the angstrom scale to achieve ideal results, an in-situ analysis of the processes is highly required. In this regard, we found during ALE experiments with in-situ monitoring with an ellipsometer that changes in the substrate temperature affected the refractive index of a material, leading to changes in measured film thickness. In addition, more ideal ALE results could be achieved by keeping the substrate temperature constant.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.97-102
• /
• 2014

In order to improve the refresh rate of old newspaper(ONP), PCC shape-controlling experiments were carried out. The effect of a PCC polymorph on improving the quality of old newspaper was studied for a transformation from waste paper to eco-friendly paper. The synthesis of PCC consists of an in-situ process and a loading process to enhance the refresh rate of old newspaper. The characteristics between the in-situ process and the loading process could be analysed by SEM analyses of coated fiber surfaces. The retention rate ranges from 65 to 67% after the application of the in-situ process, and that after the loading process ranges from 55 to 58%. The retention rates thus show a difference of about 7-10%. In addition, the whiteness and ERIC characteristics of the in-situ process gave more efficient results than those of the loading process.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.15-27
• /
• 1992

The standard measuring method of the frequency characteristics of headphones has been needed because different results come from the different measuring methods because of the lack of the reasonable measuring method of headphone characteristics, for example, in the case of psycho-acoustic experiments with headphones. In this paper, based on this fact, we studied the measurement method of headphones based on the natural hearing condition of human being, that is in situ measuring method, by measuring the headphone frequency characteristics using an artificial ear and a newly proposed device, HATS(Head And Torso Simulator). From the result of this paper, we could see that the method appropriate to a so called in situ condition was the one wi9th HATS, Because HATS simulated more correctly the acoustic impedance of the ear and the diffraction effect of the human head than the artificial ear.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.248-256
• /
• 2010

Acoustic side-aspect target strength (TS) of living Japanese anchovy (Engraulis japonicus) was measured at 120kHz during in situ experiments. The data were collected by lowering and horizontally projecting the splitbeam transducer into the anchovy school. For analysis and interpretation of the side-aspect TS data, acoustic theoretical model, based on the fish morphology, and dorsal-aspect TS data were used. Total length of the anchovy ranged from 6.6 to 12.8cm (mean length 9.3cm). The side-aspect TS distributed between -40 and -55dB, has an obvious length dependency. The mean side-aspect TS of the anchovy was -47.8dB, and the TS was about 2dB higher than mean TS generated from dorsal-aspect measurements. With reference to maximum TS, the results of the side-aspect TS were distributed within the range of the theoretical and dorsal-aspect TS. Apparently these tendency indicates that side-aspect TS measured from the study is useful data. These in situ measurements of side-aspect TS can be applied to improve acoustic detection and estimates of the anchovy, and is necessary to measure with a various frequency and length for making enhance data.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.269-274
• /
• 2013

This study is conducted to estimate the nutrient compositions and in-situ ruminal disappearancerates of roughage sources which are commonly used in South Korea. Twelve types of roughage sources are being selected based on surveys from more than 50 farms, and 12 samples from various farms and companies are collected and analyzed for their nutritive components and minerals. Two Hanwoo steers (BW $526{\pm}14$ kg) with ruminal cannula are used to investigate in situ ruminal degradability. Five roughage sources, timothy hay, alfalfa pellet, rice straw, klein grass hay and tall fescue straw, are all selected from 12 roughage sources above for further experiments. Overall, the nutrient components and minerals from the 12 roughage sources have shown low values when comparing with standard tables of feed compositions in Korea. In situ dry matter disappearance rate is recorded as high in order of klein grass, timothy, alfalfa pellet, tall fescue and rice straw. In situ crude protein disappearance rate is high in order of alfalfa pellet, klein grass, timothy, tall fescue and rice straw.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.31-38
• /
• 2013

After debris flow caused damage during recent years, many scholars and engineers have thrown their effort into analyzing risk from debris flow in Korea. But it is hard to predict damage by debris flow taken place in wide area. Recently, SINMAP program is widely well used to estimate the amount of debris flow and its' range. In order to make frequent use of it, the most important thing is selection of accurate input parameters. In-situ experiments, which are avaliable in the mountain, is to be suggested to get dependable input parameters for SINMAP. Those are permeability, cohesion, density, friction angle and thickness in SINMAP. To get those, test pit, block sampling, in-situ density test, auger boring, permeability test on ground surface, borehole shear test and dynamic cone test and so forth were selected. In addition, the reliability of the results will be increased through comparing with those by laboratory tests. Hence, the experiments are hard to enter the sites without temporary road and, if possible, licensing and many times are needed, too. Small size experiments are indeed necessary to get accurate parameters.