• 한국의류산업학회지
• /
• 제22권3호
• /
• pp.386-398
• /
• 2020

This study compared dip-coating and in situ polymerization methods for the development of nanofiber-based E-textile using polypyrrole. Nanofiber webs were fabricated by electrospinning an aqueous poly (vinyl alcohol) (PVA) solution. Subsequently, the PVA nanofiber web underwent thermal treatment to improve water resistance. Dip-coating and in situ polymerization methods were used to deposit polypyrrole on the surfaces of the nanofiber web. An FE-SEM analysis was also conducted to examine specimen surface characteristics along with EDS and FT-IR that analyzed the chemical bonding between polypyrrole and specimens. The line resistance and sheet resistance of the treated specimens were measured. Finally, an electrocardiogram (ECG) was measured with textile sensors made of the polypyrrole-deposited PVA nanofiber webs. The polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating dissolved in the dip-coating solution and indicated damage to the nanofibers. However, in the case of in situ polymerization, polypyrrole nanoparticles were deposited on the surface and inter-web structure of the PVA nanofiber web. The resistance measurements indicated that polypyrrole-deposited PVA nanofiber webs fabricated by in situ polymerization with an average sheet resistance of 5.3 k(Ω/□). Polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating showed an average sheet resistance of 57.3 k(Ω/□). Polypyrrole-deposited PVA nanofibers fabricated by in situ polymerization showed a lower line and sheet resistance; in addition, they detected the electrical activity of the heart during ECG measurements. The electrodes made from polypyrrole-deposited PVA nanofiber webs by in situ polymerization showed the best performance for sensing ECG signals among the evaluated specimens.

• 폴리머
• /
• 제29권1호
• /
• pp.87-90
• /
• 2005

본 연구에서는 폴리스티렌/점토 나노복합재료를 스티렌 단량체를 이용한 in-situ 중합법으로 제조하면서, 여러가지 유기화제로 처리한 점토들의 박리거동을 실시간 XRD 분석을 통해 확인하였다. 실시간 XRD 실험은 포항 가속기 연구소의 4CI 빔라인에서 수행되었다. 사용된 점토의 양이온 교환능과 유기화제의 구조에 의해서 서로 다른 박리거동을 보여주었다. 양이온교환능이 높은 10A-MMT와 15A-MMT의 경우, 스티렌 단량체의 중합과정중 점토의 특성피크 위치는 변화가 없었다. 하지만, 양이온교환능이 상대적으로 낮고 벤질그룹 혹은 비닐그룹을 포함하고 있는 점토들(25A-MMT와 VDAC-MMT)의 경우, 중합초기 점토의 특성피크가 중합시간이 증가함에 따라 점진적으로 저각도쪽으로 움직이며 점토층간 박리현상이 진행되는 것을 확인하였다.

• Korea-Australia Rheology Journal
• /
• 제17권2호
• /
• pp.41-45
• /
• 2005

As an effort to explore the effective use of carbon nanotubes as a reinforcing material for advanced nano-composites with polymer matrices, multi-walled carbon nanotubes (MWNTs) were successfully incorporated into polystyrene (PS) via in-situ bulk polymerization. Various experimental techniques revealed that the covalent bonds formed between PS radicals and acid-treated carbon nanotubes are favorable resulting in an effective load transfer. The enhanced storage modulus of the nanocomposites suggests a strong possibility for the potential use in industrial applications.

• 공업화학
• /
• 제10권6호
• /
• pp.902-906
• /
• 1999

메틸셀루로스를 호스트고분자로 하고 copper(II) percolate를 산화제로 사용하여 기상상태에서 직접중합방법으로 전도성 복합필름을 합성하였다. 필름으로서 우수한 성형성과 기계강도를 갖고 있는 메틸셀루로즈는 PVA와 키토산과는 달리 피롤에 대하여 높은 친화성을 나타내어서 기상중합시 호스트고분자로 적합하였다. 기상중합법으로 합성된 폴리피롤은 복합재료 내에서 전도성네트워크를 형성하여 전도성 복합필름의 전기전도도는 $10^{-1}-10^{-7}S/cm$를 나타내었다. 피롤이 호스트고분자 내에서의 폴리피롤로 중합이 되는 정도를 UV-vis분광계로 확인하였다. 전도성 복합필름의 전기전도도와 기계강도는 산화제의 농도와 합성시간에 크게 의존하였다. TGA분석결과는 호스트고분자 내에 형성된 폴리피롤은 복합재료의 열적 안정성에 영향을 미치지 않는다. 전자현미경 분석결과 폴리피롤이 복합재료 내에 균일하게 침투하여 분산되어 있음을 나타내었다. DMA를 사용하여 폴리피롤과 호스트고분자와의 상용성을 조사하였으며 dynamic mechanical analysis(DMA) 분석결과 복합재료 내에서 폴리피롤의 함량이 증가되면서 상용성이 점진적으로 저하되었다.

• 한국응용과학기술학회지
• /
• 제18권4호
• /
• pp.273-284
• /
• 2001

A series of microcapsule were synthesized by using several PCM(Phase Change Material) as a core material and gelatin/arabic gum, melamine/formaldehyde as a shell material. Coacervation technique and in situ polymerization were adopted in synthesizing microcapsules. In the microencapsulation by coacervation, tetradecane and octadecane were used as core materials. In the microencapsulation by situ polymerization tetradecane, pentadecane, hexadecane, heptadecane, octadecane, and nonadecane were used as core material. The synthesized microcapsule was examined to observe the shape of the microcapsule. The particle size analysis was performed by particle size analyzer. The thermal properties(e.g. melting point, heat of melting, crystallization temperature, heat of crystallization, differences between melting point and crystallization temperature) were obtained by DSC(Differential Scanning Calorimeter). The stirring rate effect was investigated during the microencapsulation. It was found that with increasing the stirring rate much smaller microcapule was produced. However, this did not necessarily lead to formation of spherical microcapsule.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.71-76
• /
• 2006

Porous polymer monolithic columns were prepared by the direct free radical copolymerization of methacrylic acid and ethylene glycol dimethacrylate within the confines of a chromatographic column in the presence of toluene-dodecanol as a porogenic solvent. The separation characteristics of the monolithic columns were tested by a homologous series of xanthine derivatives, theophylline and caffeine. The effects of the polymerization mixture composition and polymerization condition, mobile phase composition, flow rate and temperature on the retention times and separation efficiencies were investigated. The results showed that the selection of correct porogenic solvents and appropriate polymerization conditions are crucial for the preparation of the monolithic stationary phases. The separation efficiency was only extremely weakly dependent on flow rate and temperatures. Hydrogen-bonding interaction played an important role in the retention and separation. Compared with conventional particle columns, the monolithic column exhibited good stability, ease of regeneration, high separation efficiency and fast analysis.

• Elastomers and Composites
• /
• 제39권3호
• /
• pp.217-227
• /
• 2004

주사슬에 triad 메소겐 단위와 butylene terephthalate (BT) 단위를 갖는 새로운 액정 중합체를 중축합에 의해서 합성하였다. 합성된 중합체는 nematic 액정상을 보였으며 액정상으로의 전이온도는 $260^{\circ}C$를 보였다. PBT 용액에서 in-situ 중합에 의해서 제조된 TLCP/PBT 블렌드들의 특성 조사는 DSC, TGA, SEM, XRD 그리고 DMTA를 이용하여 이루어 졌다. 블렌드들은 PBT 매트릭스내에서 $0.05{\sim}0.2{\mu}m$ 사이즈를 갖는 잘 분산된 TLCP상들을 보여 주었다. TLCP 농도가 5에서 20wt%로 증가함에 따라서 블렌드내의 순수한 PBT의 ${\Delta}Hm$은 증가하였다. 이는 TLCP가 PBT 매트릭스 내에서 조핵제의 역할을 하였기 때문이다. 블렌드의 기계적 성질들은 TLCP의 농도에 의존하였는데 이 또한 TLCP가 블렌드 내에서 보강제 역할을 하였기 때문이다. 액정상과 PBT 매트릭스 상간에 좋은 계면 접착력을 보여 주었으며 in-situ 중합에 의해서 제조된 블렌드는 용융 블렌딩에 의해서 제조된 블렌드들보다 더욱더 높은 기계적 성질과 잘 분산된 TLCP 도메인들을 보여 주었다.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.485-494
• /
• 2008

The acrylic coating emulsions were prepared by the emulsion polymerization to protect the surface of steel plate from the corrosion chemicals like acid, base and salt water. MMA(methyl methacrylate), styrene, BA(butyl acrylate), and 2-HEMA(2-hydroxyethyl methacrylate) were used as monomer. KPS(potassium persulfate) and SBS(sodium bisulfite) as redox initiator and SDBS(sodium dodecylbenzene sulfonate) as emulsifier were used on the emulsion polymerization reaction. The most stable in-situ coating was obtained when 10% of MMA was added. Both particle size and quantity in emulsion were decreased as increasing the mount of SDBS. the most stable prepared coating emulsion with polyisocyanate crosslinker showed very high anticorrosion properties on the coated steel layer to salt water, whereas no significant improvement of anticorrosion property to acdic and basic condition it showed.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.405-408
• /
• 2009

In this work multiwalled carbon nanotube (MWCNT)/fibrin hybrid structures were synthesized via the transglutaminase- catalyzed polymerization of fibrinogen (FBG). Specifically, FBG was tethered onto oxidized MWCNTs by amide coupling, and the in situ polymerization of FBG to fibrin was performed by plasma transglutaminase (Factor XIIIa) in the presence of thrombin. The attached FBG was found to be biologically active and was polymerized to fibrin by thrombin and Factor XIIIa. MWCNT-FBG and MWCNT-Fibrin structures were characterized by FT-IR spectroscopy, transmission electron microscopy, and energy-dispersive X-ray (EDX) spectroscopy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2692-2695
• /
• 2008

Polydiacetylene (PDA) is chemosensor materials that exhibit non-fluorescent-to-fluorescent transition as well as blue-to-red visible color change upon chemical or thermal stress. They have been studied in forms of film or microarray chip, so far. In this paper, we provide a novel technique to fabricate continuous micro-fiber PDA sensor using in-situ laser-polymerization technique and 3-D hydrodynamic focusing on a microfluidic chip. The flow of a monomer solution with diacetylene (DA) monomer is focused by a sheath flow on a 3-D microfluidic chip. The focused flow is exposed to 365 nm UV laser beam for in-situ polymerization which generates a continuous fiber containing DA monomers. Then, the fiber is exposed to 254 nm UV light to polymerize DA monomers to PDA. Preliminary results indicate that the fiber size can be controlled by the flow rates of the monomer solution and sheath flows and that a PDA sensor fiber successively responds to chemical and thermal stress.