• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.205-224
• /
• 2015

A novel hydrophilic poly (vinylidene fluoride)/poly (p-phenylene terephthalamide) (PVDF/PPTA) blend membrane was prepared by in situ polycondensation of p-phenylene diamine (PPD) and terephthaloyl chloride (TPC) in PVDF solution with subsequent nonsolvent induced phase separation (NIPS) process. For comparison, conventional solution blend membrane was prepared directly by adding PVDF powder into PPTA polycondensation solution. Blend membranes were characterized by means of viscometry, X-ray photoelectron spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FESEM). The effects of different blending methods on membrane performance including water contact angle (WCA), mechanical strength, anti-fouling and anti-compression properties were investigated and compared. Stronger interactions between PVDF and PPTA in in situ blend membranes were verified by viscosity and XPS analysis. The incorporation of PPTA accelerated the demixing rate and caused the formation of a more porous structure in blend membranes. In situ blend membranes exhibited better hydrophilicity and higher tensile strength. The optimal values of WCA and tensile strength were $65^{\circ}$ and 34.1 MPa, which were reduced by 26.1% and increased by 26.3% compared with pure PVDF membrane. Additionally, antifouling properties of in situ blend membranes were greatly improved than pure PVDF membrane with an increasing of flux recovery ratio by 25%. Excellent anti-compression properties were obtained in in situ blend membranes with a stable pore morphology. The correlations among membrane formation mechanism, structure and performance were also discussed.

• Elastomers and Composites
• /
• 제33권4호
• /
• pp.255-266
• /
• 1998

본 연구는 한대의 modular 치합형 동방향회전 이축 압출기에서 음이온 중합 mechanism을 이용하여 Lauryl lactam 단량체의 고분자합성 도중 EPDM을 투입하여 연속적 중합을 수행한 연구이다. PA 12의 반응 도중 EPDM과 반응블렌드(reactive blend)를 하고 기계적블렌드와 그 물성을 비교 측정하였다.

• 공업화학
• /
• 제3권3호
• /
• pp.499-506
• /
• 1992

모노머의 반응성비가 각각 $r_1=0.53$, $r_2=0.44$반응인 styrene과 GMA(glycidyl methacrylate)를 일정 몰비로 반응시켜서 styrene과 GMA의 공중합체인 PGS를 합성한 후, 에틸렌 디아민을 반응시켜서 공중합체내에 아민기를 도입시켰다. 아민기가 도입된 중합체인 NPGS는 PGMA와 블렌드시에 DSC분석 결과, 단일 Tg를 나타내므로 두 폴리머는 상용 성이 있다는 것이 관찰되었다. 이 NPGS-PGMA의 블렌드를 PS-PGMA블렌드물에 일정무게비로 첨가하여서 이에 따른 상용성의 변화를 관찰하였다. 즉, 비상용성인 PS-PGMA블렌드에, 에폭시기와 아민기와의 화학적 반응에 의하여 상용성을 나타내는 NPGS-PGMA블렌드의 첨가에 따른 상용성의 향상을 DSC분석을 통한 Tg변화와 SEM (Scanning electron microscopy)측정에 의한 morphology변화를 통하여서 관찰하였다. 측정 결과, PS-PGMA 블렌드는 NPGS-PGMA 블렌드가 첨가됨에 따라 Tg변화를 나타내었고, PGMA의 PS내에서의 분산은 향상되었다. 따라서, NPGS-PGMA의 블렌드는 PS-PGMA블렌드의 상용성을 향상시키는 상용화제로서의 작용을 하였다.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.147-152
• /
• 2004

Ultrasound-assisted melt mixing was applied to blending polystyrene (PS) and low density polyethylene(LDPE). The influence of the ultrasonic irradiation on the morphology and mechanical properties of the blends was investigated. It was observed that the domain sizes of the blend were significantly reduced and phase stability was well sustained even after a thermal treatment. Such morphological feature was consistent with the improvements in mechanical performance of the blends. The desirable results of ultrasonic compatibilization are mainly attributed to the in-situ formation of PS-LDPE copolymers as confirmed by a proper separation experiment. An important relationship between ultrasonic irradiation time and mechanical properties is revealed and an issue on the thermal stability of the blend is discussed.

• Membrane and Water Treatment
• /
• 제8권4호
• /
• pp.311-321
• /
• 2017

Hydrophilic and high modulus PPTA molecules were incorporated into PVDF matrix via the in situ polymerization of PPD and TPC in PVDF solution. PPTA/PVDF/NWF blend membrane was prepared through the immersion precipitation phase inversion method and nonwoven coating technique. The membrane integrated technology including PPTA/PVDF/NWF blend membrane and reverse osmosis (RO) membrane was employed to treat the polyester/viscose spunlace nonwoven process wastewater. During the consecutive running of six months, the effects of membrane integrated technology on the COD, ammonia nitrogen, suspended substance and pH value of water were studied. The results showed that the removal rate of COD, ammonia nitrogen and suspended substance filtered by PPTA/PVDF blend membrane was kept above 90%. The pH value of the permeate water was about 7.1 and the relative water flux of blend membrane remained above 90%. After the deep treatment of RO membrane, the permeate water quality can meet the water circulation requirement of spunlace process.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.93-93
• /
• 2003

Electrically conducting polyaniline/cyanoethyl resin (PANI/Cyan) blends were prepared by in situ polymerization. The mechanical properties of the blend films increased with increasing cyanoethyl resin and the blend films have moderate conductivity.

• 폴리머
• /
• 제24권1호
• /
• pp.29-37
• /
• 2000

메탄올/물의 혼합용매에 아닐린 단량체, 산화제, 도판트 그리고 PEO를 넣어 일정시간 교반한 후, 용액을 캐스팅하여 용매를 증발시켜 전도성 고분자인 폴리아닐린 (PANi)과 열가소성 매트릭스 고분자인 폴리에틸렌옥사이드(PEO)가 혼합된 블렌드를 얻었다. 블렌드 내의 중합된 PANi의 양이 많아질수록 전기전도도가 증가함을 알 수 있었고, PANi의 함유량이 11 wt%만 되어도 전기전도도가 약 0.15 S/cm값을 나타내었다. 교반조 내의 체류시간에 따라 PANi/PEO 블렌드의 형태학이 변함을 관찰하였으며, 이러한 형태학이 전기전도도에 영향을 미침을 알았다. 또한 도판트의 분자크기가 커질수록 제조된 블렌드의 전기전도도가 증가함을 관찰하였다. 매트릭스 고분자로 사용된 PEO 분자량을 변화시키며 블렌드를 제조하였을때, PEO의 분자량이 클수록 제조된 PANi/PEO 블렌드의 전기전도도가 증가함을 관찰하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.348-351
• /
• 2004

In this study, the recycled concrete aggregates crushed in-situ were used for the access road pcc (portland cement concrete) pavement. Based on laboratory results, the properties of materials, mixture proportioning, blend rates, and application conditions were investigated prior to trial application, and the various problems on recycled concrete aggregate under construction have been comprehensively checked.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2002년도 추계학술발표회 논문집
• /
• pp.143-146
• /
• 2002

No Abstract, See Full Text

• Korea-Australia Rheology Journal
• /
• 제14권3호
• /
• pp.121-128
• /
• 2002

A series of thermoplastic polymers and their blends were melt-processed with high intensity ultrasonic wave in an intensive mixer. For the effective transfer of ultrasonic energy, an experimental apparatus was specially designed so that polymer melt can directly contact with ultrasonic horn. It was observed that significant variations in the rheological properties of polymers occur due to the unique action of ultrasonic wave without any aid of chemical additives. It was also found that the direct sonication on immiscible polymer blends in melt state reduces the domain sizes considerably and stabilizes the phase morphology of the blends. The degree of compatibilization was strongly affected by viscosity ratio of the components and the morphology was stable after annealing in properly compatibilized blends. It is suggested that ultrasound assisted melt mixing can lead to in-situ copolymer formation between the components and consequently provide an effective route to compatibilize immiscible polymer blends.