• Spatial Information Research
• /
• 제18권2호
• /
• pp.1-12
• /
• 2010

현재 녹지 연결성 조사는 대부분 현지조사에 의존하고 있어, 특정시기의 특정지점에서 조사된 결과에 주안점을 두고 있다. 그리하여 조사지점의 대표성에 한계가 있고 많은 시간이 소요되고, 조사 대상물 위치의 부정확, 경제적 비효용 등이 문제점으로 지적되어왔다. 본 연구는 이러한 문제에 대한 대안을 제시하기 위해 Landsat TM (Thematic Mapper) 영상의 픽셀에 의거한 녹지 연계망을 평가하고자 출발하였다. 그리하여 원격탐사 기법이 녹지 연계망을 평가할 수 있는 도구로서의 가능성을 지니고 있는 지를 평가하고자 특정 사례 연구지역에 대해 실증적인 연구가 수행되었다. 조사지점에만 국한된 현지조사 방식과 달리 픽셀 기반의 평가는 광역적인 녹지 연계망의 분포실태를 단시간에 제시하였다. 녹지 연계망 훼손 추세 평가는 다양한 시기의 녹지 변화 실태를 정량적으로 제시하고 있기 때문에 그 결과가 녹지 연계망 보전과정에서 설득력을 지닌 근거자료로 활용될 수 있을 것으로 판단된다. 본 연구가 녹지 연계망 감시에서 객관적인 데이터에 의거한 정책결정이 아닌 직관에 의존하여 왔던 관행을 개선될 수 있는 계기가 되어 향후 녹지 연계망 보전관련 중요한 참고자료가 될 수 있을 것으로 사료된다.

• 분석과학
• /
• 제16권1호
• /
• pp.1-11
• /
• 2003

본 연구는 화학공장의 실내작업장에서 화학적/생물학적 모니터링 방법을 동시에 이용하여 유해물질의 존재를 평가하고자 하였다. 실내작업장의 VOCs 분석을 위하여 Tenax TA 400 mg이 충전된 흡착관을 이용하여 시료 채취하였다. 채취한 시료는 가스크로마토그래피/질량분석법 (GC/MS)으로 분석하였다. 동시에 유해성 평가를 위해 Tradescantia BNL 4430 클론을 실내 작업장에 노출시켰다. GC/MS 분석결과 trichloroethylen, toluene, ethylbenzene, xylenes, styrene, trimethylbenzene과 같은 다양한 VOC가 검출되는 것으로 나타났다. 자주달개비 미세핵 (Trad-MCN) 분석결과 실내 작업장의 다양한 유해물질에 의한 생성률 증가가 뚜렷하게 나타났다. 실외에서는 자연적 발생범위에 해당하는 미세핵 생성률을 보였다. 결론적으로, Tradescantia 미세핵 생성률의 결과로 보아 화학공장 실내 작업장의 휘발성물질은 근로자들에게 만성적으로 건강에 위해를 끼칠 것으로 판단된다. 화학적 모니터링과 생물학적 유해성 평가방법을 병행함으로서 실내 작업장에서 유해물질을 평가하는데 매우 효과적인 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제84권6호
• /
• pp.743-765
• /
• 2022

Near-surface excavations may cause the tilting and destruction of the adjacent superstructures in big cities. The stability of a huge excavation and its nearby superstructures was studied in this paper. Some test instruments monitored the deformation and loads at the designed location. Then the numerical models of the excavation were made in FLAC3D (a three-dimensional finite difference code) and Plaxis-3D (a three-dimensional finite element code). The effects of different supporting and reinforcement tools such as nails, piles, and shotcretes on the stability and bearing capacity of the foundation were analyzed through different numerical models. The numerically approximated results were compared with the corresponding in-field monitored results and reasonable compatibility was obtained. It was concluded that the displacement in excavation and the settlement of the nearby superstructure increases gradually as the depth of excavation rises. The effects of support and reinforcements were also observed and modeled in this study. The settlement of the structure gradually decreased as the supports were installed. These analyses showed that the pile significantly increased the bearing capacity and decreased the settlement of the superstructure. As a whole, the monitoring and numerical simulation results were in good consistency with one another in this practically important project.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.188-196
• /
• 2003

Liquid-assisted cleaning technology utilizing a nanosecond laser pulse is effective for removing submicron particulates from a variety of solid substrates. In the technique, saturated vapor is condensed on a solid surface to form a thin liquid film and the film is evaporated explosively by laser heating. The present work studies the role of liquid-film evaporation in the cleaning process. First, optical interferometry is employed for in-situ monitoring the displacement of the laser-irradiated sample in the cleaning process. The experiments are performed for estimating the recoil force exerted on the target with and without liquid deposition. Secondly, time-resolved visualization and optical reflectance probing are also conducted for monitoring the phase-change kinetics and plume dynamics in vaporization of thin liquid layers. Discussions are made on the effect of liquid-film thickness and dynamics of plume and acoustic wave. The results confirm that cleaning force is generated when the bubble nuclei initially grow in the strongly superheated liquid.

• 공업화학
• /
• 제27권6호
• /
• pp.565-572
• /
• 2016

최근 국내 수질오염에 대한 높은 관심과 개선의 필요성이 요구되는 가운데 물 환경 속의 약물의 잔류는 인체를 포함한 생태계의 약물 내성을 일으킨다는 점에서 지속적인 모니터링의 필요성이 제기되고 있다. 특히 약물 중 큰 비율을 차지하는 항생제의 잔류는 하천을 통해 빠르게 생태계의 내성균 확산을 일으킬 수 있다는 점에서 매우 큰 위험요소라고 할 수 있다. 따라서 본 총설에서는 물 환경 속의 항생제 분석이 실시간으로 가능한 신속한 센싱 플랫폼 기반 기술을 서술하고자 하며 이와 관련한 국내/외 연구현황과 발전가능성 및 그에 따른 산업/경제적 효과에 대해 논의하고자 한다.

• Smart Structures and Systems
• /
• 제1권4호
• /
• pp.385-404
• /
• 2005

The paper presents a model to calculate reinforcement strain using measured crack width in members under applied tension, flexure, and/or shear stress. Crack mapping using a new type of distributed coaxial cable sensors for health monitoring of large-scale civil engineering infrastructure was recently proposed and developed by the authors. This paper shows the results and performance of such sensors mounted on near surface of two flexural beams and a large scale reinforced concrete box girder that was subjected to cyclic combined shear and torsion. The main objectives of this health monitoring study was to correlate the sensor's response to strain in the member, and show that magnitude of the signal's reflection coefficient is related to increases in applied load, repeated cycles, cracking, and reinforcement yielding. The effect of multiple adjacent cracks, and signal loss was also investigated. The results shown in this paper are an important step in using the sensors for crack mapping and determining reinforcement strain for in-situ structures.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.475-484
• /
• 2022

The loss of cable tension for civil infrastructure reduces structural bearing capacity and causes harmful deformation of structures. Currently, most of the structural health monitoring (SHM) approaches for cables rely on contact transducers. This paper proposes a cable tension identification technology using percussion sound, which provides a fast determination of steel cable tension without physical contact between cables and sensors. Notably, inspired by the concept of tensioning strings for piano tuning, this proposed technology predicts cable tension value by deep learning assisted classification of "percussion" sound from tapping a steel cable. To simulate the non-linear mapping of human ears to sound and to better quantify the minor changes in the high-frequency bands of the sound spectrum generated by percussions, Mel-frequency cepstral coefficients (MFCCs) were extracted as acoustic features to train the deep learning network. A convolutional neural network (CNN) with four convolutional layers and two global pooling layers was employed to identify the cable tension in a certain designed range. Moreover, theoretical and finite element methods (FEM) were conducted to prove the feasibility of the proposed technology. Finally, the identification performance of the proposed technology was experimentally investigated. Overall, results show that the proposed percussion-based technology has great potentials for estimating cable tension for in-situ structural safety assessment.

• Earthquakes and Structures
• /
• 제19권1호
• /
• pp.29-44
• /
• 2020

The effectiveness and the sensitivity of a Wireless impedance/Admittance Monitoring System (WiAMS) for the prompt damage diagnosis of two single-storey single-span Reinforced Concrete (RC) frames under cyclic loading is experimentally investigated. The geometrical and the reinforcement characteristics of the RC structural members of the frames represent typical old RC frame structure without consideration of seismic design criteria. The columns of the frames are vulnerable to shear failure under lateral load due to their low height-to-depth ratio and insufficient transverse reinforcement. The proposed Structural Health Monitoring (SHM) system comprises of specially manufactured autonomous portable devices that acquire the in-situ voltage frequency responses of a network of twenty piezoelectric transducers mounted to the RC frames. Measurements of external and internal small-sized piezoelectric patches are utilized for damage localization and assessment at various and increased damage levels as the magnitude of the imposed lateral cycle deformations increases. A bare RC frame and a strengthened one using a pair of steel crossed tension-ties (X-bracing) have been tested in order to check the sensitivity of the developed WiAMS in different structural conditions since crack propagation, damage locations and failure mode of the examined frames vary. Indeed, the imposed loading caused brittle shear failure to the column of the bare frame and the formation of plastic hinges at the beam ends of the X-braced frame. Test results highlighted the ability of the proposed SHM to identify incipient damages due to concrete cracking and steel yielding since promising early indication of the forthcoming critical failures before any visible sign has been obtained.

• Ocean and Polar Research
• /
• 제32권1호
• /
• pp.53-61
• /
• 2010

The distribution of coral reefs can be an indicator of environmental or anthropogenic impacts. Here, we present a habitat map of coral reefs developed using high-spatial satellite images. The study area was located on the north-eastern part of Weno island, in the Chuuk lagoon of Federated States of Micronesia. Two fieldwork expeditions were carried out between 2007 and 2008 to acquire optical and environmental data from 121 stations. We used an IKONOS image obtained in December 2000, and a Kompsat-2 image obtained in September 2008 for the purpose of coral reef mapping. We employed an adapted version of the object-based classification method for efficient classification of the high-spatial satellite images. The habitat map generated using Kompsat-2 was 72.22% accurate in terms of comparative analysis with in-situ measurements. The result of change detection analysis between 2000 and 2008 showed that coral reef distribution had decreased by 6.27% while seagrass meadows had increased by 8.0%.

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.415-422
• /
• 2009

The wave observation system in Korea has been established with an emphasis on pointmeasurement based on in situ instrumentations. However, the system cannot fully investigate the coastal wave-related problems that are significantly localized and intensified with three-dimensional regional geometries. Observation technique that can cover local processes with large time and spatial variation needs to be established. Video imaging techniques that can provide continuous monitoring of coastal waves and related phenomena with high spatial and temporal resolutions at minimum cost of instrumentation risks are reviewed together with present status of implementation in Korea. Practical applications of the video imaging techniques are suggested to tackle with various coastal issues of public concern in Korea including, real-time monitoring of wave runup and overtopping of swells on the east coast of Korea, longshore and rip currents, morphological and bathymetric changes, storm surge and tsunami inundation, and abnormal extreme waves in the west coast of Korea, etc.