• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.47-55
• /
• 2016

To evaluate the position accuracy of the MLC. This study analyzed the variations of the dosimetric leaf gap(DLG) and MLC transmission factor to reflect the location of the MLC leaves according to the dose rate variation for dynamic IMRT. We used the 6 MV and 10 MV X-ray beams from linear accelerator with a Millennium 120 MLC system. We measured the variation of DLG and MLC transmission factor at depth of 10 cm for the water phantom by varying the dose rate to 200, 300, 400, 500 and 600 MU/min using the CC13 and FC-65G chambers. For 6 MV X-ray beam, a result of measuring based on a dose rate 400 MU/min by varying the dose rate to 200, 300, 400, 500 and 600 MU/min of the difference rate was respectively -2.59, -1.89, 0.00, -0.58, -2.89%. For 10 MV X-ray beam, the difference rate was respectively ?2.52, -1.69, 0.00, +1.28, -1.98%. The difference rate of MLC transmission factor was in the range of about ${\pm}1%$ of the measured values at the two types of energy and all of the dose rates. This study evaluated the variation of DLG and MLC transmission factor for the dose rate variation for dynamic IMRT. The difference of the MLC transmission factor according to the dose rate variation is negligible, but, the difference of the DLG was found to be large. Therefore, when randomly changing the dose rate dynamic IMRT, it may significantly affect the dose delivered to the tumor. Unless you change the dose rate during dynamic IMRT, it is thought that is to be the more accurate radiation therapy.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.175-183
• /
• 2000

The purpose of this study was to identify the compensatory adaptation of dentoalveolar structure according to the various skeletal relation through the statistical correlation between the anteroposterior, vertical skeletal and dentoalveolar relation. For this study, the sample were consisted of 101 adult subjects (51male and 50 female, mean age; male 23.6 years, female 21.5 years) who had good occlusion with the range of normal overjet and overbite and acceptable Angle's class I molar relationship which had not been related orthodontically The results were as follows : 1. Even though acceptable normal occlusion, the range of measurements which represent anteroposterior, vertical skeletal relation and dentoalveolar relation were very wide. 2. Upper and lower incisor axis were significantly correlated with anteroposterior skeletal relation, which means the mote lingual inclination of upper anterior teeth and the more labial inclination of lower anterior teeth according to the more anterior position of mandible to the maxilla (P<0.01). 3. Upper and 1ower anterior alveolar bone height was statistically correlated with the lower anterior vertical skeletal height. 4. Upper and 1ower alveolar bone height were not correlated with anteroposterior skeletal relation (P>0.05). 5. The correlation between the incisor axis and vertical skeletal was more closely related in upper anterior teeth than the lower anterior teeth. To summarize the above results, even though acceptable normal occlusion, skeletal and dentoalveolar relation was very widely ranged, and there were close relationship between the anteroposterior skeletal relation and the inclination of upper and lower anterior teeth and between the vertical skeletal relation and upper and lower anterior alveolar bone height. These finding can be concluded as compensatory adaptation to the different skeletal relationship.

• Archives of design research
• /
• v.11 no.2
• /
• pp.129-140
• /
• 1998

This study aimed to grqJe for and present guideline roodel when the qJerator of domestic small manufacturing industry try to introch1ce the first industrial design by easier and more effective method. As the method of study, first of aiL examined the necessary of introducing industrial design throogh coosidering about the role and importance of small business. And next, analysed and examined the result of researching by enquete that is for qJerators of cbnestic small business. As a result, preconditioos for effective introducing industrial design were found. And, based 00 the preconditioos that were found through researching by enquete, examined the approachable introducing methods. Finally, set up the effectivable introducing methods of industrial design for doo1estic small manufacturing industry as a graphical model. As a result of study, First, the operator of small business who try to introduce industrial design needs to be well aware of these six cooditions as a prenise of effective awroach.1) coosciousness of role and versus a nation and a people of own industry Cereative 2) managing coosideratim and examinatim of a necessity of introducing industrial design as a cata1yst 3) A certain understanding aIntt essence and value of industrial design 4) Study and examinatim about a case of sucessful introducing industrial design arxl common introducing method of small business.5) Befarehand examinatim of introducing method making use of professional design organization and consultatim wicket 6) Prodent examination about the appointlrent puprpose, method of designer and infonmtion about designer. Second, as the position of small bnsiness that introduce industrial design fur the first time, it is confirmed that the aroroach going with introducing types - preliminary introducing, partitial introducing, regular introducing, whole industry level introducing - considered necessity rate of introducing industrial design and introducing range at the same time. This method is able to approach step by step, but it is confinmed that there is a characteristic in being able to select the method freely, and understanding easily for being coostructed visual form.

• Korean journal of communication and information
• /
• v.35
• /
• pp.147-178
• /
• 2006

Screen Quota is very important topic at our whole society not only film industry. Moreover the opinions are sharply divided. So, journalism, at the objective and neutral position, has the responsibility to present objective field to discuss and neutral information. This script censoriously focuses that how Korean Journalism handles Screen Quota issue from the upper mentioned premises. The first point is Korean Journalism gives legitimacy to the Governmental persistence, which is fixing Screen Quota as a hurdle for the FTA settlement so that it should be reduced. Secondly, Korean Journalism has been reducing the importance of the Screen Quota issue as the problem of film industry itself own, describing it as combat between Government and Film Industry. Third, it describes the Screen Quota as a privilege granted to the Film industry only. Finally, it provides power to the point of view of the Government which insists to reduce the Screen Quota mentioning the superiority of the competitiveness of the Koran Films discriminatingly. In conclusion, I could not but define that Korean Journalism is only speaking for America and Korean Government especially about the Screen Quota issue which is divided sharply. What it means is Korean Journalism has not been providing not only objective information but also impartial dispute field to the public for the issue which has very importance socially. The news and discussions about Screen Quota shows that this issue is not free from the progress of FTA which includes the Screen Quota problem. Further on, it could be deduced that the discussion about Korean film industry has kept on focusing its topic to the choice of decreasing or maintaining Screen Quota. The cultural contents have been expanding its importance day by day. Endeavors to settle the enormous problems of film industry should be preceded to strengthen the competitiveness and to prepare against market opening. Consequently, to solve the problems of film industry, Screen Quota should be positioned as a protect policy rather than a remedy for every ill, at the same time all the possibilities should be considered especially for the problems that Screen Quota could not solve.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.127-136
• /
• 2015

The purpose of this study is to perform a dosimetric evaluation of amplitude-based respiratory gating for the delivery of volumetric modulated arc therapy (VMAT). We selected two types of breathing patterns, subjectively among patients with respiratory-gated treatment log files. For patients that showed consistent breathing patterns (CBP) relative to the 4D CT respiration patterns, the variability of the breath-holding position during treatment was observed within the thresholds. However, patients with inconsistent breathing patterns (IBP) show differences relative to those with CBP. The relative isodose distribution was evaluated using an EBT3 film by comparing gated delivery to static delivery, and an absolute dose measurement was performed with a $0.6cm^3$ Farmer-type ion chamber. The passing rate percentages under the 3%/3 mm gamma analysis for Patients 1, 2 and 3 were respectively 93.18%, 91.16%, and 95.46% for CBP, and 66.77%, 48.79%, and 40.36% for IBP. Under the more stringent criteria of 2%/2 mm, passing rates for Patients 1, 2 and 3 were respectively 73.05%, 67.14%, and 86.85% for CBP, and 46.53%, 32.73%, and 36.51% for IBP. The ion chamber measurements were within 3.5%, on average, of those calculated by the TPS and within 2.0%, on average, when compared to the static-point dose measurements for all cases of CBP. Inconsistent breathing patterns between 4D CT simulation and treatment may cause considerable dosimetric differences. Therefore, patient training is important to maintain consistent breathing amplitude during CT scan acquisition and treatment delivery.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.3
• /
• pp.250-258
• /
• 1993

Background: After general anesthesia, decrease of functional residual capacity and lung compliance, ventilation/perfusion imbalance, and transpulmonary shunting can provoke hypoxemia during postoperative periods. Diaphragmatic dysfunction may be the main cause of these physiological abnormalities. Thus, we evaluated the change of pulmonary function after general anesthesia according to the operative sites, which could suggest clinical course and critical period of respiratory care of postoperative patients. Method: Preoperative portable spirometric evaluation and arterial blood gas analysis were performed at sitting or most-sitting position just previous day of surgery. Pulmonary function tests were also as same condition from postoperative day 1 to day 5. Results: 1) For thoracic surgery, FEV1 and FVC were not recovered at day 5, but FEV1/FVC was not decreased. $PaCO_2$ was slightly elevated at postoperative one day. 2) After upper abdominal surgery, postoperative day 5 did not show the recovery of FEV1 and FVC, but mild hypoxemia was developed at postoperative day 1. 3) Pulmonary function was recovered as preoperative value at postoperative day 5 in lower abdominal operation, but mild hypoxemia was also noted at postoperative day 1. 4) Surgery of peripheral areas did not show significant pulmonary function change and hypoxemia and hypercapnia from postoperative day 1. Conclusion: Surgery involving diaphragm provoke significant postoperative pulmonary function change after day 5. For the operation of peripheral sites adequate respiratory care during operation and postoperative period within 24 hours could prevent patients from respiratory complication.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.6.1-6
• /
• 1982

Papilloma is the common benign tumor of the larynx and the incidence of its malignant change was variable. The authors recently experienced 2 cases of squamous cell carcinoma of the larynx which were considered to be transformed from laryngeal papilloma. Case 1. A 58 year old male patient visited O.P.D. of Department of Otolaryngology of Busan National University Hospital, because of hoarseness for 3 years on May 13th, 1980. At that time, local finding of indirect laryngoscopy revealed whitish hypertrophic papillomatous mass on both vocal cords and anterior commissure, and dirty gray white pseudomembrane on left aryepiglottic fold, and the result of biopsy was squamous cell papilloma. So the laryngeal papilloma was removed under suspension laryngoscopy and then he had no specific treatment in spite of being recommended 5-FU topical spray. On March 5th, 1981, he visited O.P.D. again because of progressive exacerbation of hoarseness with mild dyspnea and histopathological finding was revealed squamous cell carcinoma of the larynx. Seven days later from that day, he visited emergency room due to severe dyspnea, and emergency tracheostomy was performed on sitting position. On April 7th 1981, total laryngectomy was performed successfully and postoperative irradiation therapy was recommended. Case 2. A 47 year old male patient visited our O.P.D. because of hoarseness for 5 years on Sep. 27, 1978. At that time, local finding of indirect laryngoscopy revealed papillomatous mass on left vocal cord and left ventricle and result of biopsy was squamous cell papilloma. So he had been treated with 11 times removal of papilloma, topical spray of 5-Fu and estrogen for 3 years, but the papilloma had been recurred. On Sep. 9th, 1981, he visited O.P.D. because of severe dyspnea and emergency tracheostomy and biopsy was performed. The result of biopsy was squamous cell carcinoma of larynx and total laryngectomy was performed successfully.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.147-169
• /
• 2015

Our society has been changed so rapidly and we have achieved industrialization and democratization swiftly. On our Economic growth and democratization, it is appraised that Christian Thought and western Capitalism thoughts have been one of the important factors. John Calvin, well known Reformer and thinker of Protestant, as M. Weber assessed, contributed greatly to the progress of Capitalism. He was a Religion Reformer as M. Luther and especially a thinker and man of deed, who affected large areas of human life such as Religion, Economy, Society and Politics. Calvin understood Economy is the main issue of theology and Economic activities can be a position which may restore the correct relationship of God and Man. This Paper aimed to survey, synthesize and systemize the Economy and Management thought of J. Calvin. On these changing current society, it surveyed if His thoughts that has long history, can be applicable or not and Where and How it may. Calvin's Thought not only on his age caused important changes and Reformation but now suggests critical milestones. His Thoughts of Love, Justice, and Fairness based on the Bible have been evaluated as the universal truth and important criteria. Until nowadays his Philosophy has composed critical Principles of decision making rules of Economy and Management and National policies. Especially today, when economy has been more emphasized as a center of our lives, His Thought suggests momentous directions on various Human Life such as Justice and Fairness, deepening of gap between poor and rich, expansion of conflicts among social classes, employment and wages, freedom of markets and its balance, and public good of land use. Reviewing Calvin's Economy and Management thoughts as meaningful basis on the our and world Economy which became worse caused by world monetary crisis and Europe financial crisis that aroused by world Economy globalization and expansion of neo-liberalism, this Paper suggested some future directions. And for the practical sectors, Distribution and Logistics, it proposed some issues and Directions, considering the impacts of His thoughts on the Industries. Nevertheless it can deliver some contributions, as a literature research, it reveals some limitations that it may contain lacking of practical investigations and cases on economy and management fields. In the future, more detailed and deeper research on the practical and situations of economy and management shall be needed.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.151-161
• /
• 2007

To obtain the information of dental arch size and the distance from one tooth center to adjacent tooth center of occlusal surface of each tooth which is perforated by Pindex system on working cast for removable die system, 600 dental casts in Busan were examined. The distance of center of occlusal surface of each tooth and dental arch size were digitized. The results were as follows; 1. Mean values of the distance from center of maxillary central incisor to maxillary lateral incisor(tooth number 11$\sim$12, 21$\sim$22) is 5,7 mm, 12$\sim$13(22$\sim$23) is 5.9 mm, 13$\sim$14(23$\sim$24) is 6.9 mm, 14$\sim$15(24$\sim$25) is 7.1 mm, 15$\sim$16(25$\sim$26) is 8.4 mm, 16$\sim$17(26$\sim$27) is 10.2 mm, 11$\sim$21 is 7.30 mm. Mean values of the distance from center of mandibular central incisor to mandibular lateral incisor(tooth number 31$\sim$32, 41$\sim$42) is 4.5 mm, 32$\sim$33(42$\sim$43) is 4.8 mm, 33$\sim$34(43$\sim$44) is 6.3 mm, 34$\sim$35(44$\sim$45) is 7.2 mm, 35$\sim$36(45$\sim$46) is 9.2 mm, 36$\sim$37(46$\sim$47) is 10.7 mm, 31$\sim$41 is 4.7 mm. 2. Mean values of the distance from the center of maxillary right central incisor to the center of maxillary left central incisor(11$\sim$21) is 7.3 mm, 12$\sim$22 is 18.2 mm, 13$\sim$23 is 26.9 mm, 14$\sim$24 is 37.2 mm, 15$\sim$25 is 43.2 mm, 16$\sim$26 is 48.5 mm, 17$\sim$27 is 53.5 mm. Mean values of the distance from the center of mandibular right central incisor to the center of mandibular left central incisor(31$\sim$41) is 4.7 mm, 32$\sim$42 is 13.3 mm, 33$\sim$43 is 21.7 mm, 34$\sim$44 is 31.9 mm, 35$\sim$45 is 38.2 mm, 36$\sim$46 is 44.8 mm, 37$\sim$47 is 50.7 mm. 3. Mean values of the distance from the line of between 11$\sim$21 to 12$\sim$22 is 10.9 mm, 12$\sim$22 to 13$\sim$23 is 8.7 mm, 13$\sim$23 to 14$\sim$24 is 10.3 mm, 14$\sim$24 to 15$\sim$25 is 6.0 mm, 15$\sim$25 to 16$\sim$26 is 5.3 mm, 16$\sim$26 to 17$\sim$27 is 5.0 mm. 31$\sim$41 to 32$\sim$42 is 8.6 mm, 32$\sim$42 to 33$\sim$43 is 8.4 mm, 33$\sim$43 to 34$\sim$44 is 10.2 mm, 34$\sim$44 to 35$\sim$45 is 6.3 mm, 35$\sim$45 to 36$\sim$46 is 6.6 mm, 36$\sim$46 to 37$\sim$47 is 5.9 mm. 4. We checked the bottom side of cast to verify the position of dowel pin. There is no difference upper side and lower side.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.4
• /
• pp.257-268
• /
• 2012

The EFDC model with find grid resolution system connecting the Gyeong-Gi bay and Han River estuary was constructed to study on spring-neap variability of net volume transport at each channel of the Han River estuary. The simulation time of numerical model is 124 days from May to August, 2009 with freshwater discharge at Han, Imjin and Yeseong River. The calibration and verification of model results was confirmed using harmonic components of water level and tidal current. The net volume transport was calculated during 30 days with normal freshwater conditions at Seokmo channel and Yeomha channel around Ganghwado. The ebbing net volume transport of 44% and 56% is drained into Gyeong-Gi bay through Yeomha and Seokmo channel, respectively. The ebbing net volume transport nearby Seodo at Yeomha channel convergence flooding net volume transport at Incheon harbor, and drain (westward direction) through channel of tidal flat between Ganghwado and Yeongjongdo to the Gyeong-Gi bay. The averaged net volume transport during 4 tidal cycles was compared to variation of spring-neap periods of the Yeomha channel. The convergence position is moved up- and down-ward according to spring-neap variability. The movement of the convergence zone is appeared because 1) increasing of discharged rate tidal flat channel between Ganghwado and Yeongjongdo at the spring period, 2) The growth of barotropic forcing with downward direction at the spring tide, and 3) The strength of the baroclinic pressure gradient is greater than spring with mixing processes.