• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.672-680
• /
• 2005

There are a lot of reasons to use In-place tests. Construction schedules often require that operations such as form removal, post-tensioning, termination of curing, and removal of reshores be carried out as early as possible. To enable these operations to proceed safely as soon as possible requires the use of reliable in-place tests to estimate the in-place strength. In-place test results are not reliable for engineering judgment. These results should be interpreted and correlated to standard compressive strength, based on the test method. In this paper some of these test procedures and their limitations are discussed. In this study we will go on for Rebound number, Pullout, Ultrasonic pulse velocity, and Cast-in-place cylinder methods which are most useful methods in the Asia.

• Structural Engineering and Mechanics
• /
• v.58 no.1
• /
• pp.39-58
• /
• 2016

Since the publication of ACI 318-02, the concrete capacity design (CCD) method has been used to determine the resistance of unreinforced concrete anchors. The regulation of steel-reinforced anchors was proposed in ACI 318-08. Until ACI 318-08, the shear resistance of concrete breakout for an unreinforced anchor during an earthquake was reduced to 75% of the static shear strength, but this reduction has been eliminated since ACI 318-11. In addition, the resistance of a hairpin-reinforced anchor was calculated using only the strength of the steel, and a regulation on the dynamic strength was not given for reinforced anchors. In this study, shaking table tests were performed to evaluate the dynamic shear strength of unreinforced and hairpin-reinforced cast-in-place (CIP) anchors during earthquakes. The anchors used in this study were 30 mm in diameter, with edge distances of 150 mm and embedment depths of 240 mm. The diameter of the hairpin steel was 10 mm. Shaking table tests were carried out on two specimens using the artificial earthquake, based on the United States Nuclear Regulatory Commission (US NRC)'s Regulatory Guide 1.60, and the Northridge earthquake. The experimental results were compared to the current ACI 318 and ETAG 001 design codes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1125-1131
• /
• 2008

In this study, Calibration Chamber Tests for cast-in-place piles in sand were performed for measuring behavior properties of piles. These tests were examined effects of various parameters of soil conditions including the relative density($D_R$), the coefficient of earth pressure, and investigated differences between cylindrical pile and taper-shaped pile with the same volumes. The important effect factors of foundation behavior were investigated by considering embedded depth of piles and shapes of piles, and inspected details of lateral behavior of piles. These results were verified reliabilities of each methods for comparing the results estimated with tests and the results by proposed estimating solutions in the past.

• The Research Journal of the Costume Culture
• /
• v.27 no.6
• /
• pp.569-581
• /
• 2019

This study investigated differences in cosmetic buying behavior and personal characteristics between cosmetic involvement groups. Cosmetics buying behavior refers to reason for using cosmetics, use of information sources, selection criteria, place of purchase, use/non-use of cosmetics, purchase propensity, purchase frequency, purchase amount, and satisfaction with cosmetics. Personal characteristic contains pursuing image, age, residence area, job, and average household monthly income. Data was collected from 5-10 December 2016, from 308 females in their 20s using an internet survey. The analysis included descriptive statistics, t-tests, Mann-Whitney U tests, and chi-square tests. The respondents were divided into two groups (a high cosmetic involvement group and a low cosmetic involvement group) according to the degree of cosmetic involvement. The results of t-tests revealed significant differences between groups in terms of reasons for using cosmetics, use of information sources, selection criteria, purchase frequency, place of purchase, use/non-use of cosmetics, and satisfaction with cosmetics. The results of Mann-Whitney U tests highlighted a significant difference in purchase frequency between both groups. The results of chi-square tests indicated significant differences in purchase frequency, purchase amount, pursuing image, and average household monthly income. However, no significant differences were evident in terms of purchase propensity, age, job, and area of residence between groups.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.115-126
• /
• 2019

The long-term settlement characteristics for the cast-in-place bored pile in the deep-thick soft soil are investigated by post-grouting field tests. Six cast-in-place bored engineering piles and three cast-in-place bored test piles are installed to study the long-term settlement characteristics. Three post-grouting methods (i.e., post-tip-grouting, post-side-grouting, and tip and side post-grouting) are designed and carried out by field tests. Results of the local test show that decreased settlements for the post-side-grouted pile, the post-tip-grouted pile and the tip and side post-grouted pile are 22.2%~25.8%, 30.10%~35.98% and 32.40%~35.50%, respectively, compared with non-grouted piles. The side friction resistance for non-grouted piles, post-side-grouted pile, post-tip-grouted pile and the tip and side post-grouted pile undertakes 89.6~91.3%, 94.6%, 92.4%~93.0%, 95.7% of the total loading, respectively. At last, the parameters back analysis method and numerical calculation are adopted to predict the long-term settlement characteristics of the cast-in-place bored pile in the deep-thick soft soil. Determined Bulk modulus (K) and a creep parameter (Ks) are used for the back analysis of the long-term settlement of the post-grouted pile. The settlement difference between the back analysis and the measurement data is about 1.11%-7.41%. Long-term settlement of the post-grouted piles are predicted by the back analysis method, and the predicted results show that the settlement of the post-grouted pile are less than 6 mm and will be stable in 30 days.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3410-3419
• /
• 1974

The purpose of this study is to find out the correlation between pumping rates and influential factors in the tube wells for irrigation through the analysis of various statistical data of the existing tube wells for irrigation and pumping tests. Statistical data of the existing tube wells for irrigation were collected from the authorities concerned, and pumping tests were carried out for twelve tube wells. The results of this study are summarized as follows: 1. The drilled tube wells are the most useful among various tube wells in securing pumping rates. 2. The enlargement of well diameter or the improvement of pumping equipments is necessary in drilled tube wells with pumping rates more than 806 ㎥/day, and the adjustment of foot valves or the special control of pumping equipments is necessary in tube wells with pumping rates less than 300 ㎥/day. 3. The choking of aquifer and slits can be prevented by removing earth and sand piled in tube wells. 4. The increase of well loss and the destruction of aquifer can be prevented by determining the optimum pumping rates through the step draw down tests. 5. The thickness of gravel packing is rather thin in drilled tube tube wells. 6. High pamping rates can be gained by deepening the depth of tube wells in the place the ground water storage is abundant, the thickness of aquifer is thick. and the depth of tube wells is deep. 7. Higher pumping rates can be obtained by constructing tube wells in the place where the drawdown is little and the coefficient of transmissibility is large.

• Smart Structures and Systems
• /
• v.4 no.1
• /
• pp.1-17
• /
• 2008

This study proposes a conceptual framework of in-situ vibration tests and analyses for quality appraisal of non-slender, cast-in-place piles with irregular cross-section configuration. It evaluates a frequency index from vibration recordings to a series of impulse loadings that is related to total soil-resistance forces around a pile, so as to assess if the pile achieves the design requirement in terms of bearing capacity. In particular, in-situ pile-vibration tests in sequential are carried out, in which dropping a weight from different heights generates series impulse loadings with low-to-high amplitudes. The high-amplitude impulse is designed in way that the load will generate equivalent static load that is equal to or larger than the designed bearing capacity of the pile. This study then uses empirical mode decomposition and Hilbert spectral analysis for processing the nonstationary, short-period recordings, so as to single out with accuracy the frequency index. Comparison of the frequency indices identified from the recordings to the series loadings with the design-based one would tell if the total soil resistance force remains linear or nonlinear and subsequently for the quality appraisal of the pile. As an example, this study investigates six data sets collected from the in-situ tests of two piles in Taipu water pump project, Jiangshu Province of China. It concludes that the two piles have the actual axial load capacity higher than the designed bearing capacity. The true bearing capacity of the piles under investigation can be estimated with accuracy if the amplitude of impact loadings is further increased and the analyses are calibrated with the static testing results.

• Journal of Educational Research in Mathematics
• /
• v.25 no.3
• /
• pp.347-366
• /
• 2015

There are a lot of causes of under-achievement in elementary mathematics, one of which may be lack of previous learning elements. We focus on the understanding of place value. The purpose of this study is to analyze underachievers' levels of understanding of place value concepts and to find the types of place value tasks that they have had special difficulty. For this purpose, an individual test called as "the Six Tasks of Place Value(SToPV)"was applied to ten third grade mathematics underachievers in elementary school. The test is a type of place value concept tests and requires one-on-one interview with some preparation materials. The participants' reactions were analysed according to the framework by Berman(2011). The result of analysis shows that third grade mathematics underachievers tend to have a great difficulty understanding the place value concepts. Also the types of difficult tasks were various from individual to individual. Based on the test results and discussion, we suggested some implications for diagnosing place value concepts of mathematics underachievers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.361-375
• /
• 2015

An energy pile is one of the novel ground heat exchangers (GHEX's) that is a economical alternative to the conventional closed-loop vertical GHEX. The combined system of both a structural foundation and a GHEX contains a heat exchange pipe inside the pile foundation and allows a working fluid circulating through the pipe, inducing heat exchange with the ground formation. In this paper, a group of energy piles equipped with parallel U-type (5, 8 and 10 pairs) heat exchange pipes was constructed in a test-bed by fabricating in large-diameter cast-in-place concrete piles. In addition, a closed-loop vertical GHEX with 30m depth was constructed nearby to conduct in-situ thermal response tests (TRTs) and to compare with the thermal performance of the cast-in-place energy piles. A series of thermal performance tests was carried out with application of an artificial cooling and heating load to evaluate the heat exchange rate of energy piles. The applicability of cast-in-place energy piles was evaluated by comparing the relative heat exchange efficiency and heat exchange rate with preceding studies. Finally, it is concluded that the cast-in-place energy piles constructed in the test-bed demonstrate effective and stable thermal performance compared with the other types of GHEX.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.5
• /
• pp.305-314
• /
• 2020

The paper explores the return migration choice of graduates, which takes place during the transition from higher education to the labor market. Graduate students, after a short time in temporary migration to cities for studying, have to make a decision of returning back home or staying in migration in urban areas for working. Drawing on the mechanism identified in the literature on internal migration, this empirical research tests the effects of two factors: place attractiveness and social supports factors on graduates' decision to return migration to hometown. A binary logit regression analysis was conducted with data from 502 surveyed graduates in Hanoi, Vietnam. The analysis of the motives reported by graduates indicates that return migration decisions cannot be reduced to a single dimension. Perceived attractiveness of a region such as quality of living environment, job opportunities, and social context of individuals positively impact on student' decision to return migration after graduation. The research results imply that, in a collectivistic country like Vietnam, students' choice of future career is strongly influenced by their social context, and choosing a place to work is not simply a matter of earning a higher salary or enjoying better working conditions, but is also related to family issues.