Dynamic shear strength of unreinforced and Hairpin-reinforced cast-in-place anchors using shaking table tests |
Kim, Dong Hyun
(Department of Civil Engineering, Pusan National University)
Park, Yong Myung (Department of Civil Engineering, Pusan National University) Kang, Choong Hyun (Seismic Simulation Test Center, Pusan National University) Lee, Jong Han (Department of Civil Engineering, Daegu University) |
1 | ACI Committee 318 (2002), Building Code Requirements for Structural Concrete and Commentary, ACI 318-02, Appendix D: Anchoring to concrete, American Concrete Institute. |
2 | ACI Committee 318 (2008), Building Code Requirements for Structural Concrete and Commentary, ACI 318-08, Appendix D: Anchoring to concrete, American Concrete Institute. |
3 | ACI Committee 318 (2011), Building Code Requirements for Structural Concrete and Commentary, ACI 318-11, Appendix D: Anchoring to concrete, American Concrete Institute. |
4 | ACI Committee 318 (2014), Building Code Requirements for Structural Concrete and Commentary, ACI 318-14, Chap. 17 Anchoring to concrete, American Concrete Institute. |
5 | ACI Committee 349 (2001), Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349-01); Appendix B Anchoring to Concrete, American Concrete Institute. |
6 | ACI 355.2 (2000), Evaluating the Performance of Post-installed Mechanical Anchors in Concrete, Reported by ACI Committee 355. |
7 | CSA N287.2 (1998), Material Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants, Canadian Standards Association, Rexdale, Ontario. |
8 | Eligehausen, R. and Hofmann, J. (2003), "Experimental and numerical investigation on fixings under shear loading close to an edge", Report, Institute of Construction Materials, University of Stuttgart. (in German) |
9 | Eligehausen, R., Mallee, R. and Silva, J.F. (2006), Anchorage in Concrete Construction, Ernst & Sohn, Germany. |
10 | ETAG 001 (2012), Guideline for European Technical Approval of Metal Anchors for Use in Concrete, European Organization for Technical Approvals (EOTA). |
11 | Gross, J.H., Klingner, R.E. and Graves III, H.L. (2001), "Dynamic anchor behavior of single and double near-edge anchors loaded in shear", Proc. of Connections between Steel and Concrete, Int. Conference organized by University of Stuttgart, fib, IABSE, Ed. R. Eligehausen, RILEM Publications S.A.R.L. |
12 | Klingner, R.E., Mendonca, J.A. and Malik, J.B. (1982), "Effect of reinforcing details on the shear resistance of short anchor bolts under reversed cyclic loading", ACI J., 79(1), 3-12. |
13 | Lee, N.H., Park, K.R. and Suh, Y.P. (2010), "Shear behavior of headed anchors with large diameters and deep embedments", ACI Struct. J., 107(4), 146-156. |
14 | Malvar, L.J. and Crawford, J.E. (1998), "Dynamic increase factors for steel reinforcing bars", Proc. of the Twenty-Eighth DDESB Seminar, Orlando, Florida. |
15 | Pajak, M. (2011), "The influence of the strain rate on the strength of concrete taking into account the experimental technique", Architecture Civil Engineering Environment, The Silesian University of Technology. |
16 | US NRC Regulatory Guide 1.60 (1973), Design response spectra for seismic design of nuclear power plants, United States Nuclear Regulatory Commission, Washington. |
17 | Park, Y.M., Kang, M.K., Roh, J.K., Ju, H.J. and Kang, C.H. (2014), "Shear resistance of CIP anchors under dynamic loading: Reinforced anchor", J. Korean Soc. Steel Constr., 26(1), 21-31. (in Korean) DOI |
18 | Petersen, D., Lin, Z. and Zhao, J. (2013), "Behavior and design of cast-in-place anchors under simulated seismic loading", Draft Final Report, Vol. 1, Cyclic Behavior of Single Headed Anchors, Department of Civil Engineering, University of Wisconsin, Milwaukee. |