• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.249-254
• /
• 2019

An optical current sensor device that measures electric current by the principle of the Faraday effect was designed and fabricated. The polarization-rotated reflection interferometer and the quadrature phase interferometer were introduced so as to improve the operational stability. Complex structures containing diverse optical components were integrated in a polymeric optical integrated circuit and manufactured in a small size. This structure allows sensing operation without extra bias feedback control, and reduces the phase change due to environmental temperature changes and vibration. However, the Verdet constant, which determines the Faraday effect, still exhibits an inherent temperature dependence. In this work, we tried to eliminate the residual temperature dependence of the optical current sensor based on polarization-rotated reflection interferometry. By varying the length of the fiber-optic wave plate, which is one of the optical components of the interferometer, we could compensate for the temperature dependence of the Verdet constant. The proposed optical current sensor exhibited measurement errors maintained within 0.2% over a temperature range, from 25℃ to 85℃.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.669-677
• /
• 2003

A new Modem technique - 8SQAM(8-state Superposed Quadrature Amplitude Modulation) - for use in power and bandwidth limited digital communication system is proposed. 8SQAM is free of inter-symbol interference(ISI) and generates output signals which have a smooth and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitudes and phases of two subsequent symbols. Accordingly, 8SQAM, as compared with a conventional 8PSK, is influenced a little by ISI and inter-modulation(IM) caused by nonlinear distortions. In this paper, the performance of the 8SQAM system, in a nonlinearly amplified channel impaired by additive white Gaussian noise(AWGN), ISI and IM, is analyzed via computer simulation. The simulation result shows that 8SQAM outperforms 8PSK with roll-off value of $\alpha$=0.25 by 2.5dB in CNR to maintain BER=1$\times$10$^{-4}$ when input back-off(IBO) of HPA is 3dB.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.111-116
• /
• 2015

This article considers a model of cooperative spectrum sharing between primary and secondary systems in which transmission occurs in two phases. In this scheme, we introduce that a single secondary transmitter, ST, employs a quadrature-phase-based signal to present the secondary message, while the primary message is presented by an in-phase-based signal. This allows simultaneous spectrum sharing without mutual interference. Therefore, an interference constraint is not necessary to protect primary operating performance from being degraded by the secondary user operations. Theoretical analysis and Simulations are then provided to confirm the superiority of the proposed scheme over the the current conventional methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.26-31
• /
• 2009

In this paper, we propose the receiver algorithms suitable for the ECMA standard proposed for multi-gigabit packet transmission in 60 GHz band. In the ECMA standard, various modulation schemes are used for system flexibility. Hence, it is crucial to develop receiver algorithms supporting various modulation schemes with an uniform hardware structure. In this paper, we propose the receiver algorithms supporting DBPSK, DQPSK and OOK modulation schemes simultaneously. The proposed algorithms are not only hardware efficient but also support various modulation schemes with an uniform hardware structure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.1122-1140
• /
• 2024

The importance of indoor positioning has grown in numerous application areas such as emergency response, logistics, and industrial automation. In ships, indoor positioning is also needed to provide services to passengers on board. Due to the complex structure and dynamic nature of ship environments, conventional positioning techniques have limitations in providing accurate positions. Compared to other indoor positioning technologies, Bluetooth 5.1-based indoor positioning technology is highly suitable for ship environments. Bluetooth 5.1 attains centimeter-level positioning accuracy by collecting In-phase and Quadrature (IQ) samples from wireless signals. However, distorted IQ samples can lead to significant errors in the final estimated position. Therefore, we propose an indoor positioning method for ships that utilizes a Deep Neural Network (DNN) combined with IQ fingerprint maps to overcome the challenges associated with accurate location detection within the ship. The results indicate that the accuracy of our proposed method can reach up to 97.76%.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.303-313
• /
• 2010

This paper describes an acoustic communication receiver structure, which is designed for QPSK (Quadrature Phase Shift Keying) signal with 25 kHz carrier frequency and 5 kHz symbol rate, and takes samples from received signal at 100 kHz sampling rate. Based on the described receiver structure, optimum design parameters, such as number of taps of FF (Feed-Forward) and FB (Feed-Back) filters and forgetting factor of RLS (Recursive Least-Square) algorithm, of joint equalizer are determined to minimize the BER (Bit Error Rate) performance of the joint equalizer output symbols when the acquisition data in shallow water using implemented acoustic transducers is decimated at a rate of 2:1 and then enforced to the input of receiver. The transmission distances are 1.4 km, 2.9 km, and 4.7 km. Analysis results show that the optimum number of taps of FF and FB filters are different according to the distance between source and destination, but the optimum or near optimum value of forgetting factor is 0.997. Therefore, we can reach a conclusion that the proper receiver structure could change the number of taps of FF and FB filters with the fixed forgetting factor 0.997 according to the transmission distance. Another analysis result is that there are an acceptable performance degradation when the 16-tap-length simple filter is used as a low-pass filter of receiver instead of 161-tap-length matched filter.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.9-15
• /
• 1994

In this paper, the linearized power amplifier using digital adaptive predistorter is implemented in order to restrict spectral spreading and adjacent channel interference. The linearized systems is composed of a DSP56001 processor that executes predistortion in baseband. 90.deg. phase shifter, power splitter/combiner, quadrature modulator/demodulator of 360MHz band, and nonlinear amplifier. A ${\pi}$/4-shift QPSK is used to modulate digital random signals. As the quantized power of baseband signal and the output of amplifier are fed to the predistorter, and predistorting values are calculated using an adaptive algorithm. In the experiment, a peak to sidelobe ratio of the linearized amplifier is improved up to 15dB in comparison with conventional nonlinear amplifier, which means that the distortion of transmitted signal is decreased and adjacent channel interference was reduced.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.3-10
• /
• 2016

To establish a network environment where multiple wireless personal area networks(WPAN) are simultaneously operating in the same area, we need to consider the effects of inter-device interference. The extent of interference effect from neighboring frequency channel interferer may be different depending on the modulation types that are used for constructing the wireless network. If a modulation scheme with high spectral side lobes is used, the spatial separation between devices plays a major role in determining the amount of interference from neighboring frequency channel interferer. In this paper, we investigate the effect of inter-device interference in the overlapped raised cosine offset quadrature-quadrature phase shift keying (ORC-$OQ^2PSK$) modulation based WPAN. By comparing the results with those of GFSK modulation based WPAN, we verify the feasibility of ORC-$OQ^2PSK$ based WPAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.537-544
• /
• 2004

In this paper, we p개pose DS-CDM-SQAM(Superposed Quadrature Amplitude Modulation) which is characterized by its smooth phase transition and small envelope fluctuation, and improves the power efficiency as compared to DS-CDM-QPSK of satellited-based DMB system(ITR-R BO.1130-4 System E) in a nonlinearly amplified channel. Computer simulation results show that the proposed DS-CDM-SQAM improves Eb/No by 1.7㏈ to maintain BER=1${\times}$$10^{-3}$ in nonlinearly amplified multipath mobile radio environments. Therefore, the proposed DS-CDM-SQAM system significantly improves the power efficiency in nonlinear land mobile satellite DMB environments.