• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.48-56
• /
• 2013

프리텐션 방식을 사용한 PSC 휨부재는 시공이 간편하고 품질관리가 용이하기 때문에 최근 토목분야에서 적용된 사례가 증가하고 있다. 특히, PSC 휨부재의 종류 중 하나인 반단면 프리캐스트 콘크리트 합성 슬래브는 롱라인 공법을 적용하여 최근에 개발되었다. 반단면 프리캐스트 콘크리트 합성 슬래브는 프리캐스트 콘크리트와 현장타설 콘크리트를 합성하여 제작한다. 이 연구에서는 롱라인 공법으로 제작한 프리캐스트 PSC를 적용한 반단면 프리캐스트 콘크리트 합성 슬래브의 프리스트레스 도입 효율과 휨강도에 대한 실험을 실시하고 그 결과를 제시하였다. 롱라인 공법은 한번의 긴장력 도입으로 여러 개의 부재를 생산할 수 있는 장점이 있다. 또한, 프리캐스트 PSC 내에 매입되어 있는 철근의 영향을 고려하여 반단면 프리캐스트 콘크리트 합성 슬래브의 휨강도를 합리적으로 평가할 수 있는 식을 제시하였다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.939-948
• /
• 2012

A 3-ply clad metal consisting of aluminum and copper was fabricated by roll bonding process and the microstructures and mechanical properties of the roll-bonded and post-roll-bonding heat treated Cu/Al/Cu clad metal were investigated. A brittle interfacial reaction layer formed at the Cu/Al interfaces at and above $400^{\circ}C$. The thickness of the reaction layer increased from $12{\mu}m$ at $400^{\circ}C$ to $28{\mu}m$ at $500^{\circ}C$. The stress-strain curves demonstrated that the strength decreased and the ductility increased with heat treatment up to $400^{\circ}C$. The clad metal heat treated at $300^{\circ}C$ with no indication of a reaction layer exhibited an excellent combination of the strength and ductility and no delamination of layers up to final fracture in the tensile testing. Above $400^{\circ}C$, the ductility decreased rasxpidly with little change of strength, reflecting the brittle nature of the intermetallic interlayers. In Cu/Al/Cu clad heat treated above $400^{\circ}C$, periodic parallel cracks perpendicular to the stress axis were observed at the interfacial reaction layer. In-situ optical microscopic observation revealed that cracks were formed in the Cu layer due to the strain concentration in the vicinity of horizontal cracks in the intermetallic layer, promoting the premature fracture of Cu layer. Vertical cracks parallel to the stress axis were also formed at 15% strain at $500^{\circ}C$, leading to the delamination of the Cu and Al layers.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.253-259
• /
• 2019

Concrete-to-concrete bedding planes (CCBP) are observed from time to time due to the multistep hardening process of the concrete materials. In this paper, a series of direct/cyclic shear tests are performed on CCBP under static and dynamic normal load conditions to study the frictional behavior effect by the shear velocities, normal impact frequencies, horizontal shear frequencies, normal impact force amplitudes, horizontal shear displacement amplitudes and normal load levels. According to the experimental results, apparent friction coefficient k ($k=F_{Shear}/F_{Normal}$) shows different patterns under static and dynamic load conditions at the stable shear stage. k is nearly constant in direct shear tests under constant normal load conditions (DCNL), while it is cyclically changing with nearly constant peak value and valley value for the direct shear tests under dynamic normal load conditions (DDNL), where k increases with decreasing normal force and decreases with increasing normal force. Shear velocity has little influence on peak values of k for the DCNL tests, but increasing shear velocity leads to increasing valley values of k for DDNL tests. It is also found that, the valley values of k ascend with decreasing impact normal force amplitude in DDNL tests. The changing pattern of k for the cyclic shear tests under constant and dynamic normal load conditions (CCNL and CDNL tests) are similar, but the peak value of k is smaller in CDNL tests than that in CCNL tests. Normal load levels, shear displacement amplitudes, vertical impact frequencies, horizontal shear frequencies and normal impact force amplitudes have little influence on the changing pattern of k for the cyclic shear tests. The tests of this study provide useful data in understanding the frictional behavior of the CCBP under distinct loadings, and these findings are very important for analyzing the stability of the jointed geotechnical structures under complicated in situ stress conditions.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.80-84
• /
• 2007

Charcoal was used as a carbon source for improving the critical current density of $MgB_2$ and the effect of annealing temperature on the $J_c$ of $MgB_2$ was investigated. The charcoal powder used in this study was $1{\sim}2$ microns in size and was prepared by wet attrition milling. $MgB_2$ bulk samples with a nominal composition of $Mg(B_{0.95}C_{0.05})_2$ were prepared by in situ process of Mg and B powders. The powder mixture was uniaxially compacted into pellets and heat treated at temperatures of $650^{\circ}C\;-\;1000^{\circ}C$ for 30 minutes in flowing Ar gas. It was found that superconducting transition temperature of $Mg(B_{0.95}C_{0.05})_2$ decreased by charcoal additions which indicates the carbon substitution for boron site. $J_c$ of $Mg(B_{0.95}C_{0.05})_2$ was lower than that of the undoped $MgB_2$ at the magnetic fields smaller than 4 Tesla, while it was higher than that of the undoped sample especially at the magnetic field higher than 4 T. High temperature annealing seems to be effective in increasing $J_c$ due to the enhanced carbon diffusion into boron sites.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1438-1447
• /
• 2010

국가 경제규모의 성장과 더불어 단위 건설현장의 규모도 대형화, 복합화 되어 가고 있는 추세이다. 이에 따라 건설현장의 다양한 자재, 장비, 인력 등의 자원에 관한 실시간 정보파악은 효율적인 프로젝트 관리의 필요성으로 대두되었다. 최근 건축분야에서는 다양한 첨단센서를 활용한 연구와 적용이 이루어지고 있다. 그러나 토목분야에는 이러한 연구가 거의 전무한 실정이다. 따라서 본 연구에서는 NATM 공법을 이용한 터널 시공 중 첨단센서를 적용할 수 있는 방안을 모색하기 위하여 자재를 이용한 진도관리에 있어서 실제 현장에 활용 가능한 방법을 제시하였다. 각 공정을 수행하는데 사용되는 자재목록을 만든 후에 공정의 대표여부, IT기술의 적용성을 검토하여 대표자재로 숏크리트와 라이닝을 선정하였으며, 선정된 대표자재를 이용한 공정시각화 및 진도관리 방안을 제시하였다.

• KIEAE Journal
• /
• 제17권4호
• /
• pp.41-48
• /
• 2017

Purpose : Currently, 25% of the domestic energy consumption structure is used as building energy, and more than 18% of this energy is consumed in the residential. Accordingly, various efforts and policies that can save energy of the building is being performed. The various researchers are conducting research to diagnose the thermal performance of existing buildings. This study is to apply in the field of precision thermal insulation performance diagnostic method for thermal performance analysis of existing detached house in Seoul, Gangreung, Gyeongju, Pohang. And this paper is analyzed quantitatively measure the existing detached house energy performance. Method: Research methodology analyzed the thermal performance over the Heat Flow Meter method by applying the measurement process and method by applying the criteria of ISO 9869-1 & ASTR method. In this study, the surface heat transfer coefficient was calibrated by applying indoor surface heat transfer resistance with reference to ISO 6946 standard. The measurement error rate between the HFM diagnosis method and the ASTR diagnosis method was reduced and the measurement reliability was obtained through measurement method error verification. Result : As a result of the study, the thermal performance vulnerable parts of the building were quantitatively analyzed, and presented for methods which can be improved capable of efficient energy use buildings.

• 한국응용곤충학회지
• /
• 제42권4호
• /
• pp.361-365
• /
• 2003

우리나라의 벼논에는 벼를 기주로 하는 여러 종류의 멸구, 즉, 벼멸구, 애멸구, 흰등멸구 들이 혼재하고 있지만 이들간의 구분은 쉽지 않다. 이들의 정확한 식별은 예찰과 방제 전략에서 필수적인 과정이다. 특히, 벼멸구는 가장 중요한 벼의 해충이기 때문에 비전문가에 있어 쉽고, 신뢰성 높은 식별 방법이 요구된다. 따라서 벼논에 분포하고 있는 벼멸구의 정확한 구분을 위하여 벼멸구, 애멸구, 흰등멸구의 약충을 조사한 결과. 두 종류의 해충에 비하여 벼멸구 약충은 다른 특징을 지니고 있었다. 측, 벼멸구 약충은 겹눈 아랫부분과 촉각 사이에 흰색형광성광택을 가지고 있었지만 애멸구나 흰등멸구의 약충에는 없었다. 그리고 형광성 반점은 부화직후 가장 선명하였고, 령기가 진행될수록 약해지다가 성충이 되어서는 없어졌다. 따라서 두부의 형광성반점은 벼멸구 약충의 판별에 활용하는데 있어 혁신적인 방법이라 할 수 있을 것이다.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.87-91
• /
• 2010

We fabricated the polyacrylic acid (PAA)-doped $MgB_2$ bulks and characterized their lattice parameters, actual C substitutions, microstructures, and critical properties. The boron (B) powder was mixed with PAA using N,N-dimethylformamide as solvent and then the solution was dried out at $200^{\circ}C$ and crushed. The C treated B powder and magnesium powder were mixed and compacted by uniaxial pressing at 500 MPa, followed by sintering at $900^{\circ}C$ for 1 h in high purity Ar atmosphere. We observed that the PAA doping increased the MgO amount but decreased the grain size, a-axis lattice constant, and critical temperature ($T_c$), which is indicative of the C substitution for B sites in $MgB_2$. In addition, the critical current density ($J_c$) at high magnetic field was significantly improved with increasing PAA addition: at 5 K and 6.6 T, the $J_c$ of 7 wt% PAA-doped sample was $6.39\;{\times}\;10^3\;A/cm^2$ which was approximately 6-fold higher than that of the pure sample ($1.04\;{\times}\;10^3\;A/cm^2$). This improvement was probably due to the C substitution and the refinement of grain size by PAA doping, suggesting that PAA is an effective dopant in improving $J_c$(B) performance of $MgB_2$.

• Advances in concrete construction
• /
• 제9권6호
• /
• pp.537-545
• /
• 2020

In order to reduce the usage of cement slurry in grouting engineering and consume the tunnel excavation waste soil, a new geopolymeric grouting material (GGM) was prepared by combine completely weathered granite (CWG) and blast-furnace slag (BFS), which can be applied to in-situ grouting treatment of completely weathered granite strata. The results showed CWG could participate in the geopolymerization process, and GGM slurry has the characteristics of short setting time, high flowability, low viscosity, high stone rate and high mechanical strength, and a design method of grouting pressure based on viscosity evolution was proposed. By adjusted the content of completely weathered granite and alkali activator concentration, the setting time of GGM were ranged from 5 to 30 minutes, the flowability was more than 23.5 cm, the stone rate was higher than 90%, the compressive strength of 28 days were 7.8-16.9 MPa, the porosity were below 30%. This provides a novel grouting treatment and utilizing excavated soil of tunnels in the similar strata.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1001-1007
• /
• 2001

In this study, high dielectric materials, (Pb,La)Ti $O_3$ thin films were fabricated by PLD (Pulsed Laser Deposition) method and investigated in terms of structural and electrical characteristics in order to develope the dielectric materials for the use of new capacitor layers of Giga bit-level DRAM. The deposition conditions were examined in order to fabricate uniform thin films through systematic changes of oxygen pressures and substrate temperature. The uniform thickness and smooth morphology of (P $b_{0.72}$L $a_{0.28}$)Ti $O_3$ thin films were obtained at the conditions of substrate-target distance 5.5[cm], laser energy density 2.1[J/$\textrm{cm}^2$], oxygen pressure 200[mTorr] and substrate temperature 500[$^{\circ}C$]. After the (P $b_{0.72}$L $a_{0.28}$)Ti $O_3$ thin films were fabricated under the above conditions, they were post-annealed by RTA process in order to increase the dielectric constant. The film thickness of 1200 [$\AA$] had dielectric constant 821. Assuming that operating voltage is 2V, leakage current density of (P $b_{0.72}$L $a_{0.28}$)Ti $O_3$ thin films would result into 10$^{-7}$ [A/$\textrm{cm}^2$] and satisfied the specification of 256M DRAM planar capacitor, 4$\times$10$^{-7}$ [A/$\textrm{cm}^2$]m}^2$]