• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.367-372
• /
• 2020

As packaging processes for atomic gyroscope vapor cells, the glass tube tip-off process, anodic bonding, and paste sealing have been widely studied. However, there are stability issues in the alkali metal which are caused by impurity elements and leakage during high-temperature processes. In this study, we investigated the applicability of a vapor cell low-temperature packaging process by depositing Au on a Pyrex cell in addition to forming an Au-Sn thin film on a cap to cover the cell, followed by laser irradiation of the Au/Au-Sn interface. The mechanism of the thin film bonding was evaluated by XRD, while the packaging reliability of an Ne gas-filled vapor cell was characterized by variation of plasma discharge behavior with time. Furthermore, we confirmed that the Rb alkaline metal inside the vapor cell showed no color change, indicating no oxidation occurred during the process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.2813-2826
• /
• 2012

Various stakeholders are involved in the creation of software projects. In general, the higher the number of stakeholders involved during the requirements elicitation phase, the better are the chances of success for the project. However, it is rather difficult to consider the opinion of all the stakeholders owing to constraints on time and resources. Furthermore, conflicts between stakeholders can become inevitable when the number of stakeholders increases. Thus, the identification of key stakeholders is an important factor in ensuring the success of a project. In this paper, a methodical stakeholder conflict resolution model (s-CRM) is proposed by considering an actual industrial case study. The proposed model uses information gain based on entropy when measuring the impurity of information. We believe that the proposed s-CRM is effective in identifying the key stakeholders and in intuitively indicating those stakeholders whose elicited requirements need to be weighted. In addition, the model provides a solution for conflicts among stakeholders during requirements engineering.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.887-892
• /
• 1999

The inner crack-like pore with controlled amount of Ca impurity in the high purity alumina single crystal sapphire had been created by micro-fabrication technique which includes ion implanation photo-lithography Ar ion milling and hot press technique. The crack-like pores in two-hour hot pressed specimen were extremely stable even after heat treating at 1,80$0^{\circ}C$ for 5 hours almost no healing was observed. But the crack-like pores in one-hour hot pressed specimen at 1,30$0^{\circ}C$ were healed by heat treatment and the amount of healing was increased with the heat treatment time and temperature and the amount of Ca addition. The edges of crack-like pore parallel to <1100> direction in (001) basal plane were stable but the edges normal to this direction in (00101) plane <1120> direction were unstable to facetting This means that the surface energy of alumina along the <1100> direction in (0001) basal plane in much lower than <1120> direction.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2012

This paper explained about the sludge recycling system which retrieved the silicon and abrasive from solar cell wafer slicing. The basic process of the recycling system was multiple centrifuge and secondary processes of ultra sonic agitation, addition of alcohol-water solution and heating sludge was added for raising separation efficiency. The recycling rate was about 96% and 94% for 2N, 4N silicon respectively. The SiC abrasive recycling rate was about 80%. To retrieve the high purity of 4N silicon, the heat process in vacuum furnace was added to remove remaining impurity components.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.229-235
• /
• 1996

Microgram quantities of DNA per gram soil were recovered with SDS- based and freeze-and thaw procedures. The average DNA fragment size was > 23 Kb. This method generated minimal shearing of extracted DNA. However, the DNA extracts still contained considerable amounts of humic impurities sufficient to inhibit PCR. Several approaches were used to reduce the interferences with the PCR (use of CTAF in extraction step, Elutip-d column purification, addition of BSA to PCR buffer) to accomplish PCR with DNA extract as a template. Most of the DNA extracts were not digested completely by restriction endonuclease, and CTAB-TREATED ane Elutip-d column purified DNA extracts were partially digested. Regarding as restriction enzyme digestion, all PCRs failed to amplify 16S rRNA gene fragments in the DNA extracts. In the case of DNA extracts only where BSA was added to PCR buffer, PCR was successfully conducted whether the DNA extracts were treated with CTAB or purified with columns. However, these two treatments were indispensable for humic impurity-rich DNA extracts to generate the PCR-compatible DNA samples. Direct extraction of DNA, coupled with these procedures to remove and relieve interferences by humic impurities and followed by the PCR, can be rapid and simple method for molecular microbiological study on soil microorganisms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.3-6
• /
• 1988

Electrical and magnetic properties of $Y_1Ba_2Cu_3O_7-y$ sintered with $Bi_2O_3$ have been investigated by levitation experiment and the measurement of electrical resistivity. The effects of $Bi_2O_3$ addition on the microstructure of the sintered specimens were also investigated. The electrical resistivity in the normal state is smaller in $Y_{0.85}Bi_{0.15}Ba_2Cu_3O_{7-y}$, where the Bi is substituted into Y site, than in the basic compound $Y_1Ba_2Cu_3O_{7-y}$ due to improved microstructure. On the other hand, the microstructure is poor and electrical resistivity is larger in the $Y_1Ba_2Cu_3O_{7-y}$ sintered with excess $Bi_2O_3$. It appears that the impurity in grain boundary affect the electrical properties significantly but has little effect on the magnetic property.

• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.43-50
• /
• 1995

Eu or Fe doped BGO scintillation crystals were grown by Czochralski method. In order to get information about traps in the grown BGO crystals, we measured trap parameters including activation energy, frequency factor and the kinetic order of thermoluminescence, and compared such parameters with thermoluminescent characteristics of pure BGO scintillation crystals. In addition, optical transmittance of the grown BGO crystals was measured.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.479-486
• /
• 1989

According to the phase diagram, 6Bi2O3.GeO2 composition melts congruently at 93$0^{\circ}C$ and forms a stable ${\gamma}$-6Bi2O3.GeO2 crystal phase below the melting point. But when the melt of this composition was cooled at a rate 1-15$0^{\circ}C$/min without tapping by a glass rod or impurity addition, a metastable $\delta$-6Bi2O3.GeO2 crystal phase was formed. It is due to that as the nucleation energy barrier of $\delta$-6Bi2O3.GeO2 crystals, which have more open and defective structure, is lower than that of ${\gamma}$-6Bi2O3.GeO2 crystals. When impurities or ${\gamma}$-6Bi2O3.GeO2 crystals existed in the melt, stable ${\gamma}$-6Bi2O3.GeO2 crystal phase was formed at various cooling rate. It is because of that the impurities or the ${\gamma}$-6Bi2O3.GeO2 crystals role as a seed crystal and as a result the nucleation energy barrier of ${\gamma}$-6Bi2O3.GeO2 crystals is lowered.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2959-2962
• /
• 2013

As the concentration of aqueous $CD_3OH$ solutions was decreased, the OD peaks in $^2H$ NMR spectra grew relative to the $CD_3$ peaks. Isotope impurity for OH groups of $CD_3OH$ and deuterium naturally present in water contributed to the OD peaks. Using these peak area data, the site-specific isotope populations of isotope enriched chemicals were measured. In addition, the method using both $^1H$ and $^2H$ NMR spectroscopy was demonstrated with neat $CD_3OH$ to measure the site-specific isotope populations. The results indicate that although it represents only ~0.015% of hydrogen isotopes, the deuterium naturally present in solvents cannot be ignored, especially when the concentration of deuterium-enriched solutes is varied. Proton/deuteron exchange between methyl and methyl/hydroxyl groups was confirmed to be negligible, while that among hydroxyl groups was detectable.

• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.523-533
• /
• 2020

Previous studies are used to examine cellulose content, degumming period, fiber quality, production yield, production cost, development limit of fiber according to physical, chemical, and microbial degumming methods. Three types of degumming methods are used to measure surface condition after degumming, necessity of additional degumming and degree of impurity removal. First, previous studies confirmed that the microbial degumming method is superior in terms of cellulose content, fiber quality, production yield, production cost, and fiber development possibility. Second, surface condition and the necessity of additional degumming were analyzed by SEM. The black skin binding material was removed in the case of the Sangnangyi and chemical degumming; however, it was insufficient and further degumming was required. Skin fiber binding material was removed in the case of microbial degumming and the surface was cleanest after degumming; in addition, most showed the form of yarn decomposition. The FT-IR spectrum determined the degree of removal of impurities and showed that it can utilize inherent physical properties as the best degumming method. The degree of removal of pectin and lignin by microbial degumming was cleanest with hemicellulose also reduced by microbial degumming.