• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.89-94
• /
• 1998

With increasing demands on automatic and high-capability manufacturing, the dynamic performance of machine tools becomes more and more important. In this paper, the correlation between dynamic compliance of the cutting system and the commencing point of chatter vibration in turning is checked by impulse excitation method and cutting tests for some cutting system. The correlation between chucking conditions of workpiece and the commencing point of chatter vibration is clarified, and it is proven that there is a mutual relations between them. Chatter vibration commenced at certain level of dynamic compliance of the cutting system regardless of the kind of the system. It shows the possibility of dynamic performance test of a lathe by means of impulse excitation method.

• 소음진동
• /
• 제9권4호
• /
• pp.778-784
• /
• 1999

A method for obtaining the motion of an impact system whose primary and secondary system are composed of lumped masses, springs and dampers, and all the contacts are made through spring and damping elements is presented. The frequency response functions derived from the equations of motion and the impulse response functions obtained from the inverse Fourier transform of the derived frequency response functions are used for the calculation of the system responses. The procedure developed for the calculation of displacements and force time-histories was based on the convolution integrals of impulse response functions and forces applied to the systems. Time histories of displacements and contact forces are obtained for the case where a random excitation is applied to a point in the system. Impact statistics such as contact forces and the time between impacts calculated from those time histories is presented.

• 한국재료학회지
• /
• 제8권9호
• /
• pp.843-848
• /
• 1998

결량화 되고 고강도의재료를 요하는 자동차, 항공기, 선박, 각종 구조물 등 여러 분야에서 복합재료의 사용은 증가되어 왔고, 그에 따라 연구가 활발히 진행되고 있다. 본 연구에서는 Impulse Excitation Method을 통해 Transversely Isotropic한 재료의 공진 주파수를 측정함으로써 복합재료의 탄성계수를 구하였다. Timoshenko Beam Equation식에 나타나는 회전관성효과와 전단변형을 고려하였을 때와 고려하지 않았을 때 재료의 탄성계수에 변화가 어떻게 나타나는 가를 관찰하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.193-197
• /
• 2004

A finite element analysis is proposed to assess the dynamic response due to impulse excitation of UUV cable system. 'Onnuri'. a special purpose ship of KORDI. was adopted as a support vessel. and all the main dimensions and properties used in the analysis were determined by the support vessel. Transient dynamic response analysis was carried out for various types of impulses. and the magnitude of cable tension induced by impulse was discussed as results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.484-490
• /
• 2008

For CSLDV, the Chebyshev demodulation (or polynomial) technique and Hilbert transform approach have been used for mode shape reconstruction with harmonic excitation. In this paper, the Hilbert-Huang transform approach was applied as an alternative to impact excitation cases in terms of a numerical approach. The vibration of the tested structure is modeled using impulse response functions. In order to verify this technique, a simply supported beam was chosen as the test rig. With additional innovative steps which are the ideal-band pass filter and the nodal point determination, Hilbert-Huang transformation can be used for a good mode shape reconstruction even in the impact excitation case.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.241-246
• /
• 2002

Usually vibration properties are obtained from frequency response functions or impulse response functions of a system. Since the contact type sensors can affect the characteristics of vibrating systems, the non-contact type sensors such as laser Doppler vibrometer (LDV) are being widely used. Currently researches are being carried out in terms of modal analysis using a scanning vibrometer. For the continuous scan; the Chebyshev demodulation (or polynomial) is apparently suggested to extract the mode shapes. With single frequency sinusoidal excitation, this approach is well fitted. In this research, the Chebyshev demodulation technique has been applied to the impact excitation case. The vibration of the tested structure is modeled using impulse response functions. The technique is also adopted to the random excitation case. In order to verify the technique, a simply supported beam was chosen as the test rig. The calculation modules are developed by using MATLAB$\^$(R)/ in WindowsNT$\^$(R)/ environment.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.105-111
• /
• 2007

본 논문에서는 극한 해상상태나 돌발적인 환경하중에서 양광시스템의 진수와 인양이 이루어질 때 발생할 수 있는 파이프의 점핑현상과 이에 의해 유발되는 파이프의 장력변화 및 위해도를 위한 해석기법을 제시하였다. 동적 과도응답 해석은 본 논문에서 제시된 기법에 의하여 여러 가지 형식의 임펄스에 대해 수행되어졌으며, 해석을 위한 모델로 KT-Submarine에서 사용하고 있는 '세계로호' 양광시스템의 진수, 인양 시스템을 선정하였다. 결과적으로 양광시스템관련 해상작업을 위한 지침이 제시되었다. 정성적인 해석기법의 검증과 비교를 위하여 ROV진수 시 발생 가능한 케이블장력 과도응답을 해석하였으며 이를 통하여, 본 연구에서 시도한 수학적 모델링과 이상화된 임펄스에 대한 파이프의 과도 응답과정이 충분한 정성적인 기초자료를 제공해 줄 수 있다는 점을 파악하였다.

• 한국음향학회지
• /
• 제18권5호
• /
• pp.63-67
• /
• 1999

최근 들어 실내음향 특성의 측정과 평가를 위해 백색잡음을 이용한 잔향시간 측정법 대신에 임펄스응답을 이용한 측정법이 널리 이용되고 있다. 이 방법은 재현성이 우수하고 다양한 실내음향 특성치들을 한꺼번에 산출할 수 있어 전통적인 잔향시간 측정법에 비해 여러 가지 장점을 가지고 있다. 본 연구에서는 MLS(Maximum Length Sequence) 신호를 이용하여 실내에서의 임펄스 응답을 측정하고 이를 후처리(post-processing) 하여 잔향시간(EDT, RT), 명료도 지수(C50, C80, D, U50, U80, AI), 음의 크기 지수(G) 등, 주로 실의 음성음향 성능을 측정하는 시스템을 구축하였다. 본 연구에서는 측정시스템과 후처리 프로그램의 구성, 몇몇 실내공간에 대한 시험 측정의 결과 및 고찰 등에 대해 소개하고자 한다.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.473-481
• /
• 2017

This study suggests a simple, convenient and non-destructive method for investigation of the Young's modulus detection in stepped shafts which only utilizes the first-order resonant frequency in flexural mode and dimensions of structures. The method is based on the impulse excitation technique (IET) to pick up the fundamental resonant frequencies. The standard Young's modulus detection formulas for rectangular and circular cross-sections are well investigated in literatures. However, the Young's modulus of stepped shafts can not be directly detected using the formula for a beam with rectangular or circular cross-section. A response surface method (RSM) is introduced to design numerical simulation experiments to build up experimental formula to detect Young's modulus of stepped shafts. The numerical simulation performed by finite element method (FEM) to obtain enough simulation data for RSM analysis. After analysis and calculation, the relationship of flexural resonant frequencies, dimensions of stepped shafts and Young's modulus is obtained. Numerical simulations and experimental investigations show that the IET method can be used to investigate Young's modulus in stepped shafts, and the FEM simulation and RSM based IET formula proposed in this paper is applicable to calculate the Young's modulus in stepped shaft. The method can be further developed to detect mechanical parameters of more complicated structures using the combination of FEM simulation and RSM.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.491-497
• /
• 2010

In this paper, we employed the classical molecular dynamics simulations using Tersoff's potential to calculate the elastic constants of the silicon carbide (SiC) crystal at high temperature. The elastic constants of the SiC crystal were calculated based on the stress-strain characteristics, which were drawn by the simulation using LAMMPS software. At the same time, the elastic constants of the SiC ceramics were measured at different temperatures by impulse excitation testing (IET) method. Based on the simulated stress-strain results, the SiC crystal showed the elastic deformation characteristics at the low temperature region, while a slight plastic deformation behavior was observed at high strain over $1,000^{\circ}C$ temperature. The elastic constants of the SiC crystal were changed from about 475 GPa to 425 GPa by increasing the temperature from RT to $1,250^{\circ}C$. When compared to the experimental values of the SiC ceramics, the simulation results, which are unable to obtain by experiments, are found to be very useful to predict the stress-strain behaviors and the elastic constant of the ceramics at high temperature.