• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.514-519
• /
• 2020

Graphite materials for lithium ion battery anode materials are the most commercially available due to their structural stability and low price. Recently, research efforts have been conducted on carbon coatings by improving side reactions at the edge site of carbon materials. The carbon coating process has classified into a CVD by chemical reaction, wet coating process with solvent and dry coating by mechanical impact. In this paper, the rapid crush/coating process was used to solve the problem of which only few parts of the carbon precursor (pitch) can be used and also environmental problems caused by solvent removal in the wet coating process. When the ratio of needle coke to pitch was 8 : 2 wt%, and the rapid crush/coating process was carried out, it was confirmed that the fracture surface was coated by pitch. The pitch-coated sample was treated at 2400 ℃ and 41.8% improvement in 10C/0.1C rate characteristic was observed. It is considered that the material simply manufactured through the simple crush/coating process can be used as an anode electrode material for a lithium ion battery.

• Physical Therapy Korea
• /
• v.19 no.2
• /
• pp.1-11
• /
• 2012

The pelvic compression belt (PCB) contributes to improving sacroiliac joint stability, and it has been used as an additional therapeutic option for patients with sacroiliac joint pain (SIJP). This study aimed to investigate whether the muscle activation patterns of the supporting leg was different between asymptomatic subjects and subjects with SIJP during one-leg standing, and how it changes with the PCB. 15 subjects with SIJP and 10 asymptomatic subjects volunteered to participate in this study. Surface electromyography (EMG) data (reaction time [RT] and muscle activation) were collected from the internal oblique, lumbar multifidius, gluteus maximus and biceps femoris muscles during one-leg standing with and without the PCB. Without the PCB condition, in the SIJP group, the biceps femoris muscle showed the fastest RT among all muscles (p<.05), whereas in the asymptomatic group, the RT of the internal oblique muscle was the most rapid (p<.05). In condition without the PCB, the biceps femoris EMG amplitudes in the SIJP group were significantly greater than that in the asymptomatic group (p<.05). After the application of the PCB, the RT of the biceps femoris muscle was significantly increased only in the SIJP group (p<.05). Moreover, the biceps femoris EMG amplitudes significantly decreased and the gluteus maximus EMG amplitudes significant increased only in the SIJP group by applying the PCB (p<.05). However, this had no such effect on the gluteus maximus and biceps femoris EMG patterns in the asymptomatic group (p>.05). Thus, this study supports the applying the PCB to patients with SIJP can be used as a helpful option to modify the activation patterns of the gluteus maximus and biceps femoris muscle.

• Journal of Ginseng Research
• /
• v.38 no.4
• /
• pp.256-263
• /
• 2014

Background: Korean Red Ginseng (KRG) is known to have antianxiety properties. This study was conducted to investigate the anxiolytic effects of KRG extract (KRGE) during ethanol withdrawal (EW) and the involvement of the mesoamygdaloid dopamine (DA) system in it. Methods: Rats were treated with 3 g/kg/d of ethanol for 28 d, and subjected to 3 d of withdrawal. During EW, KRGE (20 mg/kg/d or 60 mg/kg/d, p.o.) was given to rats once/d for 3 d. Thirty min after the final dose of KRGE, anxiety-like behavior was evaluated in an elevated plus maze (EPM), and plasma corticosterone (CORT) levels were determined by a radioimmunoassay (RIA). In addition, concentrations of DA and 3,4-dihydroxyphenylacetic acid (DOPAC) in the central nucleus of the amygdala (CeA) were also measured by high performance liquid chromatography (HPLC). Results: The EPM test and RIA revealed KRGE inhibited anxiety-like behavior and the over secretion of plasma CORT during EW. Furthermore, the behavioral effect was blocked by a selective DA D2 receptor (D2R) antagonist (eticlopride) but not by a selective DA D1 receptor (D1R) antagonist (SCH23390). HPLC analyses showed KRGE reversed EW-induced decreases of DA and DOPAC in a dose-dependent way. Additionally, Western blotting and real-time polymerase chain reaction (PCR) assays showed that KRGE prevented the EW-induced reductions in tyrosine hydroxylase (TH) protein expression in the CeA and TH mRNA expression in the ventral tegmental area (VTA). Conclusion: These results suggest that KRGE has anxiolytic effects during EW by improving the mesoamygdaloid DA system.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.266-273
• /
• 2011

Although turmeric has numerous pharmacological effects, the poor water-solubility of curcuminoids, active components of turmeric, restricts their systemic availability in orally administered formulations and limits their therapeutic potential. In this study we attempted turmeric fermentation using several probiotic bacteria to improve its solubility, and also investigated the effects of turmeric and fermented turmeric on anti-inflammatory activity. Fermented turmeric, by L. johnsonii IDCC 9203, more strongly inhibited LPS-induced expression of the pro-inflammatory cytokines than non-fermented turmeric and fermented turmeric by other probiotic strains. We used an NC/Nga mouse model for mite antigen-induced atopic dermatitis to examine the efficacy of the fermented turmeric. Fermented turmeric-fed mice exhibited a significantly reduced serum IgE level and mitigated acute inflammation. When the fermented turmeric was pre-treated by oral administration, it had more preventive activity against acute anaphylactic reaction than the non-fermented group. In addition, we observed that fermentation of turmeric leads to increased water-solubility of curcumin and a change in the active components ratios for bisdemethoxycurcumin, demethoxycrucumin and curcumin. Taken together, these results strongly suggest that fermented turmeric by L. johnsonii IDCC 9203 could be used as a functional food ingredient for improving treatments for atopic dermatitis.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.105-109
• /
• 2005

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is $4.5{\times}3.2{\times}0.8 mm^3$ and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPF's and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR In the mean while, two types of bias circuits -lumped and distributed - are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPF's and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

• Korean Journal of Plant Resources
• /
• v.27 no.6
• /
• pp.687-700
• /
• 2014

Rice blast (Magnaporthe oryza B.) is one of the most important diseases in rice that causing great yield losses every year around the world. It is important to screen valuable genetic resources for improving blast resistance. This study was conducted to identify the blast resistance in 279 Korean rice landraces using blast nursery tests and isolate inoculum screening. The results showed that 11 landrace accessions found to be resistant to rice blast in blast nursery and inoculation screening tests and the degree of lesions in most accessions showed that they were susceptible to reactions. In order to find the distribution of blast resistant genes, a molecular survey was conducted to identify the presence of major blast resistance (R) gene in 279 Korean landraces. The results revealed that their frequency distribution was Pik-m (36.2%), Piz (25.4%), Pit (13.6%), and Pik (10%). Besides, the frequency distribution of Piz-t, Pii, Pik-m/Pik-p, Pi-39(t), Pib, Pi-d(t)2, Pita/Pita-2 and Pi-ta genes were identified as less than 10%. The results did not consist with the reactions against blast diseases between genotypes and phenotypic part of the nursery tests and isolate inoculation. For concluding these results, we used genome-wide SSR markers that have closely been located with resistance genes. The PCoA analysis showed that the landrace accessions formed largely two distinct groups according to their degree of blast resistance. By comparing genetic diversities using polymorphic information contents (PIC) value among the resistant, total and susceptible landraces, we found that PIC values decreased in four SSR markers and increased in six markers in the resistant accessions, which showed contrary to total and susceptible groups. These regions might be linked to resistance alleles. In this study, we evaluated the degree of blast resistance and the information about the distribution of rice blast resistant genes in Korean rice landraces. This study might be the basis for association analysis of blast resistance in rice.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.400-406
• /
• 1997

The electrical and physical characteristics of aluminum oxide and Pt thin films on it, deposited by reactive sputtering and DC magnetron sputtering, respectively, were analyzed with increasing annealing temperature($400{\sim}800^{\circ}C$) by four point probe, SEM and XRD. Under $600^{\circ}C$ of annealing temperature, aluminum oxide had the properties of improving Pt adhesion to $SiO_{2}$ and insulation without chemical reaction to Pt thin films and the resistivity of Pt thin films was improved. But these properties of aluminum oxide and Pt thin films on it were degraded over $700^{\circ}C$ of annealing temperature because aluminum oxide was changed into metal aluminum and then reacted to Pt thin films deposited on it. The thermal characteristics of Pt micro heater were analyzed with Pt-RTD integrated on the same substrate. In the analysis of properties of Pt micro heater, active area was smaller size, Pt micro heater had better thermal characteristics. The temperature of Pt micro heater with active area, $200{\mu}m{\times}200{\mu}m$ was up to $400^{\circ}C$ with 1.5watts of the heating power.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.737-741
• /
• 2005

In this study, the effect of copper content on the NO removal efficiency by Cu/MCM-41 has been investigated. MCM-41 was prepared by hydrothermal synthesis using a gel mixture of colloidal silica solution and cetyltrimethylammonium. Cu/MCM-41 was manufactured with copper content (5, 10, 20, and 40%) in Cu(II) acetylacetonate. The surface properties of MCM-41 were investigated by using pH, XRD, and FT-IR analyses. $N_2/77K$ adsorption isotherm characteristics, including the specific surface area and micropore volume were studied by BET's equation and Boer's t-plot methods. NO removal efficiency was confirmed by gas chromatography technique. From the experimental results, the MCM-41 was analyzed to have the surface functional groups of Si-OH and Si-O-Si and the characteristic diffraction lines (100), (110), (200), and (210) corresponding to a hexagonal arrangement structure. The copper content supported on MCM-41 appeared to increase the NO removal efficiency in spite of decreasing the specific surface areas or micropore volumes. Consequently, it was found that the copper content in Cu/MCM-41 played an important role in improving the NO removal efficiency, which was mainly attributed to the catalytic reactions.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.1
• /
• pp.26-32
• /
• 2009

The multi-level storage architecture has been widely adopted in servers and data centers. However, while prefetching has been shown as a crucial technique to exploit sequentiality in accesses common for such systems and hide the increasing relative cost of disk I/O, existing multi-level storage studies have focused mostly on cache replacement strategies. In this paper, we show that prefetching algorithms designed for single-level systems may have their limitations magnified when applied to multi-level systems. Overly conservative prefetching will not be able to effectively use the lower-level cache space, while overly aggressive prefetching will be compounded across levels and generate large amounts of wasted prefetch. We design and implement a hierarchy-aware lower-level prefetching strategy called PMS(Prefetching strategy for Multi-level Storage system) that applicable to any upper level prefetching algorithms. PMS does not require any application hints, a priori knowledge from the application or modification to the va interface. Instead, it monitors the upper-level access patterns as well as the lower-level cache status, and dynamically adjusts the aggressiveness of the lower-level prefetching activities. We evaluated the PMS through extensive simulation studies using a verified multi-level storage simulator, an accurate disk simulator, and access traces with different access patterns. Our results indicate that PMS dynamically controls aggressiveness of lower-level prefetching in reaction to multiple system and workload parameters, improving the overall system performance in all 32 test cases. Working with four well-known existing prefetching algorithms adopted in real systems, PMS obtains an improvement of up to 35% for the average request response time, with an average improvement of 16.56% over all cases.

• The Korean Society of Law and Medicine
• /
• v.21 no.3
• /
• pp.77-116
• /
• 2020

The use of drugs that reflect the experiences and achievements of modern science has given human being the benefits of treating diseases and improving health conditions. However, in addition to the benefits of those, medicines have inherently inevitable adverse reactions. Many countries are taking measures such as market entry regulations or post-marketing surveillance to minimize damage caused by drug side effects, but the occurrence of side effects cannot be eliminated. Although the damage is force majeure, in some cases, the doctor who prescribed the drug or the pharmacist who administered the drug may have to compensate for the damage. The liability depends on whether the side effects were known in advance, the type of medicine, etc. On the other hand, in some cases, drug manufacturer may have to take liability for the side effect itself. As it is not easy for victims to be compensated for damages in those cases, many countries, including Korea, are setting to protect victims through the Product Liability Act. Drugs are also one of the product, so liability set by the Product Liability Act may apply. Even before the enactment and enforcement of the Product Liability Act, damage caused by drug has occurred. To resolve them, precedents have developed case law, which have many similarities with the Product Liability Act, but also have differences. Damage caused by drug manufactured prior to the enforcement of the Product Liability Act may occur in the future. In this context, the legal principles of the case laws will remain valid and be applied. This is an important reason to review the case law of precedents.