• Journal of Yeungnam Medical Science
• /
• 제32권2호
• /
• pp.71-79
• /
• 2015

Background: Recent studies have shown that the nontuberculosis mycobacterium (NTM) recovery rate in clinical cultures has increased within Korea. However, another study conducted by a secondary hospital within Daegu reported different results. Therefore, the purpose of this study is to understand and evaluate the microbiological distribution and clinical features of NTM in Daegu. Methods: A retrospective study was conducted on 11,672 respiratory specimens undergoing acid fast bacilli (AFB) culture from 6,685 subjects who visited Yeungnam University Respiratory Center from January 2012 to December 2013. Results: Of the 11,672 specimens undergoing AFB culture, 1,310 specimens (11.2%) showed positive results. Of these specimens, NTM was recovered from 587 specimens, showing a recovery rate of 44.8%. Identification test for NTM was performed on 191 subjects; the results were as follows: M. avium-intracellulare complex (MAC) 123 (64.4%), M. abscessus 20 (10.5%), M. kansasii 12 (6.3%), and 33 other NTM germ strains. Of the 382 subjects with NTM, 167 were diagnosed with pulmonary NTM disease (43.7%), however virulence differed depending on NTM strain. Multivariate analysis showed that nodular bronchiectasis, the nodules, and finding consistent with cavity under imaging study were statistically significant for triggering pulmonary NTM disease. AFB culture showing MAC and M. abscessus was statistically significant as well. Positive predictive value for NTM polymerase chain reaction (NTM-PCR) was 88.6%. Conclusion: Results for NTM recovery rate within the Daegu area were similar to those for the Seoul metropolitan area. We can assume that NTM infection is increasing in our community, therefore AFB-positive subjects (1) should undergo NTM-PCR, (2) should have their culture results checked for differentiation of mycobacterium tuberculosis complex (MTB) from NTM, and (3) undergo NTM identification test to confirm its type. Administration of treatment with the above results should be helpful in improving the patients' prognosis.

• Journal of the Korean Magnetics Society
• /
• 제25권4호
• /
• pp.111-116
• /
• 2015

Practical difficulty in the HDDR (hydrogenation - disproportionation - desorption - recombination) processing of Nd-Fe-B-type alloy is a poor reproducibility of coercivity of the HDDR-treated material. In an attempt to improve the reproducibility of coercivity of the HDDR-treated $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy, the hydrogen decrepitation was carefully controlled so as to induce more extensive micro-cracks in the particle. Prior to the hydrogenation and disproportionation reaction of HDDR processing, an additional hydrogen degassing was carried out at an elevated temperature of $600^{\circ}C$ under vacuum for the previously hydrogen decrepitated particle. During the additional hydrogen degassing the lattice of hydrogen absorbed $Nd_2Fe_{14}B$ phase was further shrunken, hence more microcracks were introduced in the particle due to its brittle nature. Particles with more micro-cracks had more homogeneous hydrogen absorption and desorption reaction during the HDDR-treatment. The improved reproducibility of coercivity of the HDDR-treated material was attributed to the improved homogeneity of the HDDR reactions due to the presence of more micro-cracks.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.358-363
• /
• 2013

Lithium-ammonia (Li-$NH_3$) solutions are possible to be successfully made under the vacuum condition but there still remains a problem of undergoing stable and reliable decomposition in vacuum for high-efficiency thermoelectric power generation. This paper describes a new method for improving the thermoelectric conversion efficiency of Li-$NH_3$ solutions in vacuum. The proposed method uses a 'U'-shaped Pyrex vacuum tube for the preparation and decomposition of pure fluid Li-$NH_3$ solutions. The tube is shaped so that a gas passageway ('U') connecting both legs of the 'U' helps to balance pressure inside both ends of the tube (due to $NH_3$ gasification) during decomposition on the hot side. Thermoelectric experimental results show that solution reaction in the 'U'-shaped tube proceeds more stably and efficiently than in the 'U'-shaped tube, and consequently, thermoelectric conversion efficiency is improved. It is also proved that the proposed method can provide a reversible reaction, which can rotate between synthesis and decomposition in the tube, for deriving the long-time, high-efficiency thermoelectric power.

• Journal of the Korean institute of surface engineering
• /
• 제51권4호
• /
• pp.207-213
• /
• 2018

Not only efficiency of chlorine evolution reaction (CER) but also durability namely service life is very important property in dimensional stable anode for Ballast Water Management System (BWMS) for marine ships. Many researchers have been focused on improving efficiency of CER by controlling composition, phase and surface area for a long time, but the efforts to increase durability was relatively small. In this study, we have investigated the effect of $TiO_2$ protective interlayers on efficiency and durability of DSA electrodes. $TiO_2$ protective interlayers were prepared by thermal oxidation at 500, 600 and $700^{\circ}C$ on Ti substrate. And then the DSA electrodes consisting of $Ti/RuO_2-PdO-TiO_2$ were prepared by thermal decomposition method on $TiO_2$ interlayers. The efficiencies of CER of DSA electrodes without $TiO_2$ interlayer and with $TiO_2$ interlayer grown at 500, 600 and $700^{\circ}C$ were 94.19, 94.45, 84.60 and 76.75% respectively. On the otherhand, durabilities were 30, 55, 90 and 65 hours respectively. In terms of industrial aspect, the performance of DSA is considered high efficiency and durability which can correspond to total production of chlorine. If we considered the performance index of DSA as the product of efficiency and durability, performance indices could be recalculated as 28.26, 50.85, 76.14 and 49.89 respectively. As the thermal oxidation temperature increasing, life time were increased remarkerbly, while efficiency of CER was decreased slightly. As a result, DSA electrode with $TiO_2$ interlayer grown at $600^{\circ}C$ has shown about 2.7 times performace of original DSA electrode without $TiO_2$ interlayer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제23권3호
• /
• pp.56-64
• /
• 2019

Various approaches have been attempted to develop recycling technologies related to industrial waste resources containing metals. Among them, glass is not decomposed into microorganisms, so landfill is not suitable, and interest in the recycling of waste glass is increasing. In this paper, by incorporating chelate resin to suppress the elution of heavy metals in waste glass and using waste glass as a fine aggregate and we want to evaluate the strength, drying shrinkage, alkali-silica reaction and heavy metal leaching of shielded filler materials and to provide basic data for utilizing waste glass as an economical and environmentally friendly shielding filler. As a result of the test, it was found that the use of waste glass as a fine aggregate was effective in the development of strength, but the incorporation of chelate resin had an influence on the strength development. In addition, the addition of chelate resin was effective in improving drying shrinkage but it was found to affect the alkali - silica reaction. As a result of the heavy metal leaching test, the KSLP test method satisfies all the criteria for heavy metal leaching. However, in case of lead, the limit of US ANSI 67-2007a was exceeded and further study should be done.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제27권3호
• /
• pp.27-39
• /
• 2019

In this study, thermal-alkali pre-treatment (THAP) optimal condition and co-digestion efficiency with THAP of the mixture food waste and sewage sludge were evaluated for improving the performances of co-digestion for mixed food waste and sewage sludge. The optimal condition of THAP was evaluated for solubilization COD, CST(Capillary Suction Time), TTF(Time to Filter), and volatile fatty acids (VFAs) with THAP temperature and NaOH concentration. In addition, the co-digestion of mixed food waste and sewage sludge were evaluated using biochemical methane potential (BMP) test. The optimal THAP reaction temperature and NaOH concentration of food waste and sewage sludge were $140^{\circ}C$ and 60 meq/L to solubilization COD over 20%, CST and TTF under 60sec and VFAs concentration over 12,000 mg-COD/L, respectively. The optimal condition of co-digestion of mixed food waste and sewage sludge equal to THAP condition. Therefore, it was determined that the optimal condition of THAP reaction temperature and NaOH concentration for co-digestion of mixed food waste and sewage sludge were $140^{\circ}C$ and 60 meq/L, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제46권4호
• /
• pp.349-360
• /
• 2020

Bio-conversion manufacturing technology has been developed to produce ginsenoside Rd which is increasingly in demand as a cosmetic material due to various possibilities related to improving skin function. In order to convert ginsenoside Rb1 which is contained in red ginseng saponin (RGS) into Rd, several commercial enzymes were tested. Viscoflow MG was found to be the most efficient. In order to optimize the conversion of RGS to ginsenoside Rd by enzymatic transition was carried out using response surface methodology (RSM) based on Box-Behnken design (BBD). The main independent variables were RGS concentration, enzyme concentration, and reaction time. Conversion of ginsenoside Rd was performed under 17 conditions selected according to BBD model and optimization conditions were analyzed. The concentration of the converted ginsenoside Rd ranged from 0.3113 g/L to 0.5277 g/L, and the highest production volume was obtained under condition of reacting 2% RGS and 1.25% enzyme for 13.5 hours. Consequently, RGS concentration, enzyme concentration which is 0.05 less than p-value and among the interactions between the independent variables, the interaction between enzyme concentration and reaction time was confirmed to be the most influential.

• Journal of Appropriate Technology
• /
• 제7권1호
• /
• pp.59-71
• /
• 2021

Hybrid hydrothermal carbonization (Hybrid HTC) technology is a proprietary thermochemical process for two or more organic wastes.The reaction time is less than two hours with temperature range 180~250℃ and pressure range 20~40bar. Thanks to accumulation of the carbon of the waste during Hybrid HTC process, the energy value of the solid fuel increases significantly with comparatively low energy consumption. It has also a great volume reduction with odor removal effect so that it is evaluated as the best solid fuel conversion technology for various organic wastes. In this study of the hybrid hydrothermal carbonization, the effect on the calorific value and yield of Cambodian mango waste were evaluated according to changes in temperature and reaction time. Through the study, parameter optimization has been sought with improving energy efficiency of the whole plant. It is decomposed in the Hydro-Carbonation Technology to Generate Gas. At this time, it is possible to develop manufacturing and production technologies such as hydrogen (H₂) and methane (CH₄). Based on the results of the study, a pilot plant (2t/day) has been proposed for future commercialization purpose along cost analysis, mass balance and energy balance calculations.

• The Journal of the Convergence on Culture Technology
• /
• 제8권5호
• /
• pp.469-475
• /
• 2022

As the recent structure construction is constructed as a large-scale and deep underground excavation in close proximity to the building, the installation of retaining wall and supporters (Struts) has become complicated, and the number of supporters to avoid interference of the structural slab has increased. This construction process becomes a factor that causes an increase in construction joints of a structure, leakage and an increase in wall cracks. In addition, this reduced the durability and workability of the structure and led to an increase in the construction period. This study planned to dismantle the two struts simultaneously as a plan to reduce the construction joints, and corrected the earth pressure by assuming the reaction force value by the initial earth pressure and the measured data as the response ratio. After recalculating the corrected earth pressure through the iterative trial method, it was verified by numerical analysis that simultaneous disassembly of the two struts was possible. As a result of numerical analysis applying the final corrected earth pressure, the measured value for the design reaction force was found to be up to 197%. It was analyzed that this was due to the effect of grouting on the ground and some underestimation of the ground characteristics during design. Based on the result of calculating the corrected earth pressure in consideration of the response ratio performed in this study, it was proved analytically that the improvement of the brace dismantling process is possible. In addition, it was considered that the overall construction period could be shortened by reducing cracks due to leakage and improving workability by reducing construction joints. However, to apply the proposed method of this study, it is judged that sufficient estimations are necessary as there are differences in ground conditions, temporary facilities, and reinforcement methods for each site.

• Journal of dental hygiene science
• /
• 제14권4호
• /
• pp.563-570
• /
• 2014

The purpose of this study was to investigate the degree of verbal violence against dental hygienists, their emotional reaction and the relation between their intention of job transfer and verbal violence so that it could offer the basic data for developing the way how to cope with verbal violence and for improving their performance. Two hundred fifty-seven dental hygienists working for dentists' in Busan were interviewed from May 17 to 31, 2014 to collect data, of which analysis was as follows: 1) As a result of verbal violence done by patients and their guardians, 80.5% said that they experienced crude language with 17.5% forceful and imperative sentence, and 13.2% ignorant statements about their job. They were exposed to verbal violence once or twice every 6 months. As a result of researching verbal violence of co-working senior or junior hygienists, 52.1% answered that their co-working senior or junior hygienists talked crude language and 38.1% said their co-workers happened to say crude language to them. The crude language experience was relatively high as 20.2% and once or twice a week. As a result of verbal violence done by dentists, 47.5% said that they've heard crude language and 34.6% said that they experienced forceful and imperative sentence. 2) The overall average of the intention to transfer their job was $3.06{\pm}1.03$, while the highest intention of job transfer was $3.11{\pm}0.91$ where they said I have once wanted to transfer my job. 3) As a result of seeing the relation among verbal violence, emotional reaction and the intention of job transfer, there was co-relation between verbal violence and the patients' age (p<0.01); there were also co-relation between verbal violence of patients, co-workers and dentists (p<0.01). There was also significant relation between emotional reaction on verbal violence and their intention of job transfer (p<0.001).