• Women's Health Nursing
• /
• v.2 no.2
• /
• pp.284-297
• /
• 1996

A maternity ward in a hospital in Seoul has an educational program for postpartal mothers since its opening, but evaluation on the program has not been done. This study was to find whether the educational program contributed to increase of knowledge and confidence of the post-partal mothers in the area of postpartal self-care and the newborn baby care or not. This study aimed at improvement of the educational program for posrpartal mothers and the newborn babies. Subjects were 40 primiparae who were admitted to the obstetric ward in a general hospitals in Seoul from August 20th to September 10th, 1995. Subjects were those who had no labor pain at the admission time, had no complications during labor and delivery, gave a birth to a healthy baby, and agreed to participate in this study. All subjects were well educated and were in well-to-do group. Most of them received antenatal care adequately. They were tested on knowledge and self-confidence in the area of postpartal self-care and infant care two times, one at the admission time and the other prior to discharge. After the first test, nurses in a maternity ward and nursery taught them on postpartal self-care and infant care. Education consisted of a 1 hour planned program and incident teachings done at bed side. Four tools were developed by authors based literature review. The test tool for knowledge of postpartal self-care consisted of 15 items which included the definition of postpartum, dangerous symptoms in postpartum, lochia, time to begin coitus, postpartum exercise, sitz-bath, and perineal care. The test tool for self-confidence in postpartal self-care included such items as emergency care on dangerous symptoms in postpartum, sexual life and contraception after postpartum, self-confidence in postpartum exercise and perineal care. The test tool for knowledge of newborn baby care consisted of 18 items which included bathing, umbilical cord care, vaccination, breast feeding, abnormal symptoms of neonate. The test tool for self confidence in the newborn baby care included umbilical cord care, vaccination, breast feeding, emergency care for baby. Analysis of demographic data were analyzed with calculation of percentage. Score differences between the first test and the second test were analyzed with paired t-test. SAS / PC (Release 6.04 for DOS) program are as follows. 1. Mothers' knowledge of postpartal self-care increased significantly after education (t=10.04, df=38, p=0.0001). 2. Mothers' self-confidence in postpartal self-care increased significantly after education (t=6.53, df=38, p=0.0001). 3. Mother's knowledge of the newborn abay care increased significantly after education (t=9.74, df=38, p=0.0001). 4. Mothers' self-confidence in the newborn baby care increased significantly after education(t=8.22, df=38, p=0.0001) Suggestions for further studies and nursing practice were as follows. 1. We suggest studies by randomized control-group pretest-posttest design or nonequivalent control group pretest-posttest design will be done. 2. We suggest follow-up studies to find if mothers's confidence will last or not after discharge. 3. We suggest general hospitals to establish a phone-counseling system.

• Journal of Technologic Dentistry
• /
• v.36 no.1
• /
• pp.27-37
• /
• 2014

Purpose: The purpose of this study is to investigate the improvement measure of dental technicians practical examination system. Methods: The subjects in this study were 290 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 16.0. The collected data was analyzed by frequency and chi-square test. Results: Dental technician practical exam feasibility of survey were largely negative views. Articulators work required in practical exam as a tool used (28.7%), electric wax carver (19.5%), heating clear (17.8%), handpiece (16.2%) had a response. Dental Technician positions in accordance with practical exam in comparison to satisfaction, the professor is satisfied, but the clinical dental technicians were generally dissatisfied (p<0.05). Conclusion: Based on the results of this study, Current is necessary to analyze the practical test. It also should be compared with foreign institutions. Long-term and short-term improvement examination system that can be applied to the improvement of the dental technician to draw practical test it is necessary to improve the system.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.1
• /
• pp.31-35
• /
• 2005

Higher productivity requires high-speed motion of machine tool axes. The iron core linear DC motor (LDM) is widely accepted as a viable candidate for high-speed machine tool feed unit. LDM, however, has two inherent disturbance force components, namely cogging and thrust force ripple. These disturbance forces directly affect the tracking accuracy of the feeding system and must be eliminated or reduced. In order to reduce motor ripple, this research adapted the feedforward compensation method and neural network control. Experiments carried out with the linear motor test setup show that these control methods are effective in reducing motor ripple.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.73-77
• /
• 2002

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted far a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects tracking accuracy of the carrage and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method and neural network control. Experiments carried 7ut on the linear motor test setup show that this control methods is usable in order to reduce the motor ripple.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.71-73
• /
• 2001

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted for a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects the carrage tracking accuracy and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method. Experiments carried out on the linear motor test setup show that this compensation method is usable in order to reduce the motor ripple.

• Women's Health Nursing
• /
• v.6 no.1
• /
• pp.34-45
• /
• 2000

The study was to find whether the educational program contributed to increase of knowledge and self-efficacy of the postpartal primiparas. This study aimed at improvement of the educational effect for postpartal primiparas. The Subjects were 34 primiparas who were admitted to the obstetric ward in a University hospital from November 15th to December 9th, 1999. The Subjects were those who had no labor pain at the admission time, had no complications during labor and delivery and, gave birth to a healthy baby. They were tested on knowledge and self-efficacy two times, one at the admission time and prior to discharge. After the first test nurses in a maternity ward taught them on postpartal care. Two tools were developed by authors based on literature review. The test tool fr knowledge of postpartal car consisted of 23 items. The test tool for self-efficacy of postpartal care consisted of 16 items. Analysis of demographic data were analyzed with calculation of percentage. Score differences between the first test and the second test were analyzed with paired t-test. The Spss (Win 8.0) program was used for data analysis. The results are as follows. 1. There were not significant influencing general characteristics of primiparous to pre-educational knowledge. There were significant influencing general characteristics of primiparous to post-educational knowledge : occupation(t=13.04, p=0.00), postpartal education(t=5.51, p=0.02). 2. There were not significant influencing general characteristics of primiparous to pre-educational self-efficacy. There were significant influencing general characteristics of primiparous to post-educational self-efficacy : antenatal education(t=5.53, p=0.02) 3. Primiparas' knowledge of postpartal care increased significantly after education(t=13.04, p=0.00). 4. Primiparas' self-efficacy of postpartal care increased significantly after education(t=5.51, p=0.02). 5. Correlation between knowledge and self-efficacy was r=.360(p=0.03). We suggest follow-up studies to find whether primiparas' self-efficacy will last after discharge or not.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.21-28
• /
• 2001

Analysis of squeal noise generated during brake operation is an important task for the improvement of brake noise prob-lem. By the use of measuring instrument and techniques, test and evaluation process are to be developed systematically in quantitative analysis. The cost far test and evaluation 7an be reduced, and the technical power can be raised by the devel- oped system.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.146-154
• /
• 2005

Recently, the high-speed and intelligence technology of machine tools are developed for the high efficiency of productivity Under the operating condition from the high-speed of machine tools, the various failure modes can occur in core units of manufacturing system. Therefore it is for the reliability concept of machine tool to be required in a design level. And the above-stated technology must be accommodated in the feeding and spindle subsystem, etc those are the core units of machine tools. In this study, we are developed the test-bed of sliding cover (C-plate) in order to evaluating reliability and estimating failure modes of feeding subsystem under operating conditions. The reliability experiment using the developed test-bed and the additional structural analysis executed on single and double structure. We found out the weak parts of sliding cover and were able to predict a life cycle from the experiment results. In this study, we propose the new C-plate model with double link structure to apply the high-speed machine tool in the fundamental guideline.

• The Journal of the Korea Contents Association
• /
• v.1 no.1
• /
• pp.68-73
• /
• 2001

The interaction between web site and it's user is more active and free than that of any other interface environment. Consequently, it is very important that user interface environment must be fully considered in web site development process. In this study, first, web interface environment and it's features are examined, then web usability test techniques are analyzed, and on the basis of the results, new tool for visualizing various responses and patterns of web site user is developed. Finally, by applying newly developed tool to usability test process of an internal hub site and analyzing the results, effective methods for visualization and evaluation of using patterns of web site are suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.233-239
• /
• 2014

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analyzer in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. The combustion analysis is desperately needed in order to induce a correct judgment on the condition of the engine and suggest the specific ways to improvement as well as the correct engine output. And these tool is advantageous to reduce fuel consumption and maintenance of the engine. In this study, using the developed measuring kit, combustion analysis of marine generator engine which was adapted as test engine was carried out. It was verified that the good operation condition of the engine as well as contributing to fuel savings by checking and readjusting accurately the irregular combustion of the test engine were accomplished. From the results all above, it was recognized that the measuring kit by new method for engine output was developed and verified for its utilities.