• Physical Therapy Korea
• /
• v.4 no.2
• /
• pp.18-35
• /
• 1997

The purpose of this study were to determine causes of low back pain in bus drivers who usually work in prolonged sitting position and to find the relationship of back pain with general characteristics and work environmental characteristics, stress symptoms, to com맹re lordosis angle of habitual driving posture and resting posture in low back pain group and non-low back pain group, and to use this result as a basis for improvement of work environment and comprehensive rehabilitative management of low back pain. Ninety-eight bus drivers were selected from the membership of an urban transit union in Seoul. These informations were collected from May 1, 1997 to May 25, 1997 by means of structured questionnaires and X-ray findings. These data were analyzed by $x^2$ test, t-test, logistic regression using SAS. The major results were as follows: 1. Of the respondents, 66.3% of bus drivers were found to be experiencing back pain. 2. Of the respondents of low back pain groups, 78.5% reported that major cause of low back pain was due to prolonged sitting. 3. The group with experiences of frequent or continuous vibration had more low back pain (p<0.05). There were no significant differences among other work environmental factors. 4. Average stress score was significantly higher in the group with low back pain than in the group without low back pain (p<0.05). 5. The results of the logistic regression analyses were statistically significant vibration from seat and stress score among the risk factors (p<0.05). 6. Averaged lordosis angle of habitual driving posture was $7.6{\pm}14.9$ degrees in low back pain group, $16.5{\pm}8.7$ degrees in non-low back pain and averaged lordosis angle of resting sitting posture was $10.8{\pm}13.7$ degrees in low back pain, $18.9{\pm}9.6$ degrees in non-low back pain group but the difference in mean lordosis angles of two groups was not statistically significant. The results of this study indicate that professional drivers developed chronicity of low back pain due to unfit seat, poor habitual posture and stress from vibration or other risk factors. Therefore, there is need to improve work environment, i.e. enough resting, to set a seat to support lumbar spine properly and to provide comprehensive rehabilitation program including early diagnosis, proper treatment and education for self help management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3326-3337
• /
• 2013

This study was performed to determine health-related dietary and lifestyle of characteristic factors associated with sodium hyperingestion of korean adults by sexual difference. Study subjects were 30~69years (n=1,622) adults who participated in the 2010 Korean National Health and Nutrition Examination Survey (KNHANES V-1). Subjects were divided into the hyperingestion group (HG, n=1,494) and normal ingestion group (NG, n=128) by 'WHO growth standard sodium intakes(2,000mg/day)' and the relationships between Comparison of demographics and physical measurement, eating behaviors and health-related factors were analyzed. By logistic regression method, risk factors for sodium hyperingestion group revealed in this study were gender(female), number of family', 'breakfast', 'lunch', 'dinner', 'nutrition labeling use'. and In case of male, risk factors for sodium hyperingestion group were 'lunch', 'dinner', 'self-rated body image' of eating behaviors. In case of female, Which were number of family' of demographics, 'breakfast', 'lunch', 'dinner' of eating behaviors. In these results, according to different sexual aspect of sodium hyperingestion, we suggest that nutrition label use and proper nutrition intake criteria among sexual, recognition promotion campaign along with education program for repressed sodium hyperingestion related to hypertension prevention of korean adults should include eating habits improvement and demographics lifestyle modification.

• Journal of Nutrition and Health
• /
• v.53 no.2
• /
• pp.203-214
• /
• 2020

Purpose: This study investigated customers' perception of a hygiene grade certification system for restaurants and this study also determined way to promote the application of the hygiene grade certification. Methods: A total of 315 customer responses were used for the data analysis. Statistical analyses were conducted using the SPSS program (ver. 23.0) for frequency analysis, χ²-tests, t-tests, analysis of variance, and Importance-Performance Analysis (IPA). Results: The composition of the respondents was 43.8% males and 56.2% females. The 73.3% lived with their families while 26.7% lived alone. Among those surveyed, 84.5% dine out at least once a week and 66.8% dine out during weekends evening. In addition, the most preferred types of restaurants were Korean restaurants (37.5%), delivery restaurants (14.6%), and Western restaurants (8.9%). Information about restaurant was most frequently obtained through Internet searches (54.0%). The average expenditure of eating-out per person was 15,483 Korean won, and the overall satisfaction averaged 3.58 out of 5 points. According to the results of IPA, the restaurant selection attributes that were priorities for improvement were the foods' taste and restroom cleanliness. In addition, 30.5% of respondents recognized the hygiene grade certification system for restaurants. The intention of dining at restaurants with a hygiene grade certification in the future was on average 4.02 out of 5 points. A total of 56.8% of respondents were willing to pay more for a restaurant with a hygiene grade certification. The average percentage of additional price was 6.02%. Conclusion: In order to apply and quickly disseminate the hygiene grade certification system all over the Korea, the study results suggest that relevant policy should be provided by the Korean government for certified restaurants along with the relevant education and promotion of the system to customers.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.802-808
• /
• 2019

DC motors are used extensively on shipboard, including as the ship's winch operating motor, owing to their simple speed control and excellent output torque characteristics. Moreover, they were used as propulsion motors in the early days of electric propulsion ships. However, mechanical rectifiers, such as brushes, used in DC motors have certain disadvantages. Hence, brushless DC (BLDC) motors are increasingly being used instead. While the electrical characteristics of both types of motors are similar, BLDC motors employ electronic rectifying devices, which use semiconductor elements, instead of mechanical rectifying devices. The inverter system for driving conventional BLDC motors uses a two-phase excitation method so that the waveform of the back electromotive force becomes trapezoidal. This causes harmonics and torque ripple in the phase current switching period in which the winding wire through which the current flows is changed. Researchers have studied and presented various methods to reduce the harmonics and torque ripple. This study applies a cascaded H-bridge multilevel inverter, which implements a proportional-integral speed current controller algorithm in the driving circuit of the BLDC motor for electric propulsion ships using a power analysis program. The simulation results of the modeled BLDC motor show that the driving method of the proposed BLDC motor improves the voltage waveform of the input side of the motor and remarkably reduces the harmonics and torque ripple compared with the conventional driving method.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.315-324
• /
• 2016

The purpose of the study are expected to provide some basic information on counseling, diagnosis and treatment planning for patients related to teeth care. A self-reported questionnaire was filled out by 320 subjects in Seoul and Gyeonggi from May to August, 2015 after permission from Institutional Review Board (IRB). Except 18 copies, 302 data were analyzed using SPSS WIN 19.0 program. The questionnaire consisted of four questions of the general characteristics of the subjects, ten questions of the awareness toward of subjective teeth, five questions of the influence of teeth on appearance, and ten questions of self-esteem. The dependent variables made a 23.4% prediction of self-esteem. If they have higher education(p<0.001), influence of teeth on appearance(p<0.001) and the awareness toward of subjective teeth(p<0.001) had significant influence on self-esteem. The findings suggest that heightened subjective awareness toward teeth seems to be of use for the improvement of self-esteem. Therefore it's required to make an effort to take good care of teeth in terms of color or arrangement as well as oral health.

• Journal of Oral Medicine and Pain
• /
• v.38 no.1
• /
• pp.69-76
• /
• 2013

Aim : The purpose of this study was to investigate the hypothesis that treatment with self-checking behavior management program was valuable in the management of temporomandibular disorders compared with a existing method treatment group. Methods : All participants who are diagnosed with temporomandibular disorders were treated with medication and physical therapy. They came into the clinic at intervals of two weeks, three times. The signs and symptoms were assessed investigating Pain NRS(Numerical Rating Scale), MCO(Maximum comfortable opening), Noise NRS, LOM(Limitation of Mouth opening) NRS at every visit. Experimental group received instructions repeatedly by using self evaluation questionnaire. Control group was educated once at the beginning of treatment. The difference Pain NRS, MCO, Noise NRS, LOM NRS between first and second visits, first and third visits were estimated.. Result :Experimental group showed greater improvement on MCO difference after stopping medication(p=0.001). This improvements were prominent in the male(p=0.001) and the first or second decade of the patients(p=0.004). Conclusion : The present study showed that there was better result when educating repeatedly with using self evaluation questionnaire than educating once at the beginning of the treatment.

• The Korean Journal of Emergency Medical Services
• /
• v.9 no.2
• /
• pp.55-78
• /
• 2005

The purpose of this study was to provide basic data for the improvement of the guidelines and training programs regarding the cardiopulmonary resuscitation performance of bystanders who can respond to the incidents in earlier times as the first responder of the cardiac arrest incident, by reviewing the performance of basic CPR and the influencing factors after providing 70 students of Department of Emergency Medical Technology with the CPR training. For the purpose of the study, the collected data were computerized and analyzed by SPSS-WIN program(ver. 10.1). The results for this study were as follows The duration of session between the groups in the BLS CPR were 3 minutes and 36 seconds, 2 minutes and 32 seconds respectively. The average compression number per minute were 24.3 times and 33,2 times respectively(p=.000), and the average compression rate per minute were 112 times and 122 times respectively(p=.000). The average ventilation number per minute were 3.54 times and 5.1 times respectively(p=.000). The errors in compression "Too shallow" were 20.73 times(34.6%) and 23,23 times(38,7%) out of 60 times in 4 cycles with the standard of 38 nun. In CPR performance results according to gender in the first episode, males showed better results in compression depth as 41.5 mm comparing to females average 38.2 mm(p=.015). When ventilation results were compared according to the use of FS, the average ventilation number per minute, total ventilation per minute and the average volume per episode were significantly higher when FS was not used(<.040), There was no significant difference in ventilation accuracy between two groups. According to the results, we need to improve and distribute portable barrier devices, and to be familiar with those devices. We need to enforce ventilations as well as to include compressions so that faster and more accurate CPR can be performed. Additionally, we need to exclude ventilation only cases, minimize the interference time of chest compression due to inaccurate ventilation, simplify or minimize the complicatedness of CPR performance and responding time related to breathing, provide first responders with various training programs such as initial assessment and ventilations only, or initial assessment and chest compression-only CPR and than provide advanced training with AHA BLS education including CPR for more than two people according to CPR skills and target characteristics.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.411-416
• /
• 2023

The purpose of this study is to investigate the utilization of major learning tools among radiology science students and assess the accuracy of a conversational artificial intelligence service program, specifically a chatbot, in the context of the national radiologic technologist licensing exam. The survey revealed that 84.3% of radiology science students actively utilize electronic devices during their learning process. In addition, 104 out of 140 respondents said they use search engines as a top priority for efficient data collection while studying. When asked about their awareness of chatbots, 80% of participants responded affirmatively, and 22.9% reported having used chatbots for academic purposes at least once. From 2018 to 2022, exam questions from the first and second periods were presented to the chatbot for answers. The results showed that ChatGPT's accuracy in answering first period questions increased from 48.28% to 60%, while for second period questions, it increased from 50% to 62.22%. Bing's accuracy in answering first period questions improved from 55% to 64.55%, and for second period questions, it increased from 48% to 52.22%. The study confirmed the general trend of radiology science students utilizing electronic devices for learning and obtaining information through the internet. However, conversational artificial intelligence service programs in the field of radiation science face challenges related to accuracy and reliability, and providing perfect solutions remains difficult, highlighting the need for continuous development and improvement.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.3
• /
• pp.31-45
• /
• 2015

This study is designed to analyze the effect of the Job satisfaction which is composed of job itself, work place condition, reward, workload, social awareness by personal assistant for the Disabled on the service quality and to perceive the importance of job satisfaction of person assistance for the disabled, finding ways of enhancing job satisfaction in social welfare practice. For this purpose, total 218 personal assistants for the disabled'data were collected and analyzed. The results were personal assistant for the disabled'trait of sociology of population and general trait, job satisfaction, service quality, the correlation of job satisfaction and service quality, and the effect of job satisfaction on service quality. The results showed that personal assistant'job itself, reward, had a positive impact on service quality. On the basis of these results, significant practical implication are as follows; Firstly, there needs to be a expansion of education program for the job satisfaction of personal assistant for the disabled. Secondly, in relation to the reward of personal assistant for the disabled, the improvement of wage structure is requested.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.442-452
• /
• 2010

Our team carried out a new program for public engagement on nanotechnology in Korea. We chose 22 monitors, who majored in science or technology and graduated from universities long time ago. Most of them were married and housewives. This 'focus group' had not only general knowledge about science or technology but also much interest in social activities. The 167 nanoproducts to be monitored were for daily life, e.g. home appliances (washing machine, refrigerator, water purifier, etc), clothing, cosmetics, food, toy, and others. And the period of it was one month. The monitors had a sheet with 10 questions, and filled them out in essay form. All of them submitted 2~3 sheets every weekend to our team. Before monitoring, our team had a meeting for introduction and explanation about the potential risk of nanotechnology as well as benefits from it. Another meeting was held after finishing monitoring to share their experience one another. The main results of the monitoring were as follows: the number of nanoproducts describing both the definition of 'nano' and the size of nanomaterials was just 2 (1.2%) the number of them explaining the technical methods enough was 15 (9/0%) the number of them accounting for the reason of functional improvement enough was 14(8.4%); the number of them doubtful as if there would be exaggeration or false knowledge was 27 (16.2%); the number of them commenting potential hazards to human health or environment was almost zero; the number of them describing about safety certification acceptable was 9 (5.4%). The monitors made a proposal containing recommendation to Government and industry. The contents were as follows: industry should make the manual in detail and correctly, Describe Certificate detailed and correctly, Do research on risk and toxicity continually, Educate employee about nanoproducts at consumer's center; Government should make indication of nanoproducts compulsory, Appoint Certificate Authority and make Certificate Mark guaranteeing the safety on nanoproducts, Make detailed explanation about nanoproducts compulsory.