• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.180-188
• /
• 2014

It is very important accurate diagnosis and quick treatment in cerebrovascular disease, i.e. stenosis or occlusion that could be caused by risk factors such as poor dietary habits, insufficient exercise, and obesity. Time-of-flight magnetic resonance angiography (TOF-MRA), it is well known as diagnostic method without using contrast agent for cerebrovascular disease, is the most representative and reliable technique. Nevertheless, it still has measurement errors (also known as overestimation) for length of stenosis and area of occlusion in celebral infarction that is built by accumulation and rupture of plaques generated by hemodynamic turbulence. The purpose of this study is to show clinical trial feasibility for 3D-SPACE T2, which is improved by using signal attenuation effects of fluid velocity, in diagnosis of cerebrovascular disease. To model angiostenosis, strictures of different proportions (40%, 50%, 60%, and 70%) and virtual blood stream (normal saline) of different velocities (0.19 ml/sec, 1.5 ml/sec, 2.1 ml/sec, and 2.6 ml/sec) by using dialysis were made. Cross-examinations were performed for 3D-SPACE T2 and TOF-MRA (16 times each). The accuracy of measurement for length of stenosis was compared in all experimental conditions. 3D-SPACE 2T has superiority in terms of accuracy for measurements of the length of stenosis, compared with TOF-MRA. Also, it is robust in fast blood stream and large stenosis than TOF-MRA. 3D-SPACE 2T will be promising technique to increase diagnosis accuracy in narrow complex lesions as like two cerebral small vessels with stenosis, created by hemodynamic turbulence.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.41-52
• /
• 2010

The purpose of this paper is to evaluate visitor satisfaction(VS) in waterfront parks in terms of resources, facilities, embodiment of theme(ET), site composition(SC), relaxation activity space(RAS), and dynamic activity space(DAS), which are supply-side components in the planning process of waterfront parks, in order to answer the research question; 'How is visitor satisfaction of waterfront parks determined?' After reviewing the literature on parks and the building process of waterfront parks in Korea, we constructed a conceptual framework and have ascertained a research hypothesis. We had obtained data through a questionnaire survey from 327 visitors at waterfront parks, based on the quota sampling method. We have analyzed the data using the path analysis method. We found that: 1) The direct effects of resources and facilities on VS turned out to be 0.273 and 0.306, respectively while the indirect effects are 0.114, 0.170, respectively. 2) The direct effects of SC, as a component of the planning process on VS, turned out to be 0.243 while that of ET had no affect on VS. The indirect effect of ET and SC on VS turned out to be 0.059 and 0.018, respectively. 3) The direct effects of RAS on VS turned out to be 0.129 while the indirect effects of RAS and DAS on VS turned out to be 0.002 and 0.017, respectively. 4) The size of causal effect, in order, were facilities, resources, SC, RAS, ET, and DAS. 5) Resources and facilities, as a park foundation, compose 64.84 percent of total causal effect while ET and SC have 24.04 percent and RAS and DAS have 11.12 percent, respectively. These research results imply that: 1) Existing waterfront parks should be regenerated with the embodiment of water related theme and with improved facilities for RAS and visitor programs and/or facilities for DAS. 2) The relationship among ET, SC, RAS and DAS should be increased for a significant improvement of VS, and 3) A process-oriented approach turned out to be highly useful for the development of substantive theory and methodology. It is recommended that a structural equation model on waterfront parks be developed using more empirical data and this approach be widely applied for testing its validity.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.113-124
• /
• 2013

The government strives to create venture ecosystem for realizing creative economy, at the same time, the Mistry of Education is spending huge resources and efforts to spread entrepreneurship education to universities in Korea. Since entrepreneurship education gives motivation to individuals and creates market innovation and these connect to the growth of national economy through increased efficiency, entrepreneurship education is becoming increasingly more important for realizing creative economy. Based on the importance, entrepreneurship education in the universities is now spreading rapidly. However, college students' entrepreneurial intention has still not been improved comparing to spreading entrepreneurship education. To overcome the poor improvement, entrepreneurship education needs to be driven more systematic direction through the study on the effect of students' motivation and environment. In this study, entrepreneurship as a part of careers perspectives, is analyzed on students' career reasons with entrepreneurial intention. For this study, 918 surveys was collected from 7 universities having entrepreneurship courses in Seoul and Gyeonggi regions in 2012 and analyzed 858 surveys in order to prove the hypothesis. The results disclosed the relationship between students' career reasons and entrepreneurial self-efficacy and intention. Motivation factors of self-realization, innovation and role model have positive effect on entrepreneurial self-efficacy following by increased entrepreneurial intention, unlike the common notion financial success and independence factors are not significant with entrepreneurial intention of students. Based on these results having meaningful implication to Korea entrepreneurship education, this study is expected to have contribution to the successful promoting the creative economy realization of our government.

• Management & Information Systems Review
• /
• v.32 no.5
• /
• pp.69-88
• /
• 2013

This study aimed to analyze the effects that the exchange relationship among employees engaged in the wedding industry in Busan, Ulsan and Gyeongnam area exerted on job satisfaction and voluntary service intentions. For this purpose, a theoretical model was presented based on previous studies and the relationship among variables was analyzed based on the analysis results through a survey. There have recently been great difficulties in the whole wedding industry due to the global economic depression and the low birthrate. Moreover, it is hard to optimize the future business environment. In particular, the low birthrate has weakened the demand base of the wedding industry. As a result, it is expected that the competition among companies will be more fierce in the wedding industry. Employees' voluntary service intention become much more important to overcome difficulties in this industry. Employees' voluntary service intentions can be possible when their job satisfaction is achieved. Many studies report the result that this job satisfaction can naturally be achieved when the high quality exchange relationship among a leader, team members (co-workers) and customers is formed. It is viewed that employees' voluntary service intentions should be induced through job satisfaction to improve the profitability through the efficient operation and management of the system. A leader of the organization should make an effort to form the high-quality exchange relationship with members, support so that team members(coworkers) and other employees can get along together and the teamwork can be improved and induce them to improve a high level of service quality with friendly customer services. In spite of the significance of the study discussed above, there are the following limitations in this study. There is a limit to a certain extent in generalizing study conclusions because the study was limited to the Busan, Ulsan and Gyeongnam area. If practical surveys which full- and part-time employees are included in the composition of samples are conducted for wedding suppliers in the country in the future, the quality of study will be able to improve.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.291-299
• /
• 2011

Purpose: This study was designed to measure patient satisfaction and oral health-related quality of life and to assess an association between patients' satisfaction and oral health-related quality of life after implant surgery by using structural equation modeling. Materials and methods: A total of 257 participants who visited 6 dental clinics located in Daegu city for the purpose of implant treatment participated in this study. Six months after completion of implant surgery, the patients' satisfaction and oral health-related quality of life were surveyed. The effect of factors associated with patients' satisfaction such as functions and aesthetics, maintenance and cost on oral health-related quality of life after implant surgery was analyzed using AMOS 4.0. Results: Oral health-related quality of life was improved in all dimensions of OHIP-14 after implant surgery. Functions and aesthetics as well as maintenance had a significant effect on oral health-related quality of life (P<.05), while cost was not a critical factor influencing oral health-related quality of life. Conclusion: High satisfaction with functional aspects and maintenance aspects significantly affected good quality of life. The result of this study supported the fact that education and management for patients after implant therapy were positively related to good quality of life based on a theoretical model.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1544-1551
• /
• 2016

Various types of fermented soybean foods are consumed in various Asian countries, including China, Indonesia, Japan, Korea, and Vietnam. Cheonggukjang is a Korean whole soybean paste fermented by Bacillus subtilis and regarded as a healthy food. The objective of this study was to investigate the Ca-bioavailability and anti-osteoporotic effects of cheonggukjang (CGJ) containing high poly-gamma glutamate (PGA) contents in an animal model. Blood samples were collected from the jugular vein at 0, 0.5, 1, 2, 3, 4, and 5 h after a single oral dose in male rats. Ca-bioavailability in CGJ containing high PGA contents was approximately 3~5 times higher than that of natural CGJ. Female rats were either sham-operated (sham; n=5) or surgically ovariectomized (OVX; five animals per group) and then administered to OVX control, raloxifene hydrochloride (RLX) 1 mg/kg/d, or CGJ containing high contents of PGA (20 and 200 mg/kg/d) for 12 weeks. Serum osteocalcin concentration was significantly lower in the CGJ 200 mg/kg/d group compared with the OVX control group. Serum progesterone concentration was significantly higher in the CGJ 200 mg/kg/d group compared with the OVX control group. Reduction grade of the trabecular bone decreased in the RLX 1 and CGJ 200 mg/kg/d group compared with that of the OVX control group. In conclusion, CGJ 200 mg/kg/d may have inhibitory effects on osteoporosis in OVX rats, and Ca-bioavailability was improved in CGJ containing high PGA contents.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.452-458
• /
• 2008

The effect of fermented soybean culture of Bacillus subtilis MORI mixed with mulberry leaves on the lowering the levels of blood glucose and cholesterol was examined using neonatal streptozotocin-induced diabetic (n-STZ) rats. B. subtilis MORI produces 1-deoxynojirimycin (DNJ), an $\alpha$-glucosidase inhibitor. The content of DNJ of soybean fermented culture mixed with mulberry was higher (4.1$\pm$0.0 mg/g dry base) than that (1.5$\pm$0.0 mg/g) of mulberry. The concentration of 50% inhibition (IC50) against rat intestinal $\alpha$-glucosidase of soybean fermented culture mixed with mulberry was $5.6{\pm}0.1{\mu}g$/mL and that of mulberry was $17.0{\pm}0.5{\mu}g$/mL. Experimental groups of diabetic rats were randomly assigned to normal control group (NC group), diabetic control group (DC group) and three diabetic groups fed with DNJ food product. One of the three diabetic groups was M group (60 mg DNJ food product/kg) (DNJ food product containing 30% mulberry) and the other two were MM-60 group (60 mg/kg) and MM-120 group (120 mg/kg) (DNJ-fortified food product containing 30% fermented soybean culture mixed with mulberry leaves). The glucose in serum was significantly decreased in the MM-60 and MM-120 groups fed with DNJ-fortified food product for 4 weeks, compared with DC group. Total cholesterol and triglyceride in serum were also lower in MM-60 and MM-120 groups than the DC group. These results support that the fermented soybean culture of B. subtilis MORI mixed with mulberry leaves improved the metabolism of blood glucose and lipid in the n-STZ rat model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of Family Resource Management and Policy Review
• /
• v.25 no.3
• /
• pp.87-102
• /
• 2021

Child abuse and neglect are recently increasing in Korea, and although the government has actively improved the child protection system, the number of abused children and the rate of cases judged as abuse have continuously risen. Given that 75% of child abusers are parents, child abuse and neglect are expected to recur. To prevent such a recurrence, various intervention programs for abused children and their parents are required. The purpose of this study were to design a recovery support service process and investigate the effectiveness of pilot program for families of origin, including neglected(protected) children, to improve the system by which these programs are operated, and formulate policy alternatives that reinforce "family preservation" principles. The pilot program was implemented from June to November 2020 in 4-local healthy family support center. The number of program participants and the frequency of participation in each other differed, because of the difference in number of confirmed coronavirus cases in each region and the requirement for social distancing. Through the program, a community-based service process was developed for neglected(protected) children and their parents, and cooperative networks between related facilities and institutions were established. The study formulated the following recommendations: First, a cooperation system among government departments mandated to provide different services to neglected(protected) children is needed. Second, wider and various channels through which abused children can avail of protective services should be developed within communities. Third, more stable environments for program operation should be cultivated, and cooperative partnerships should be sought for knowledge sharing among relevant government departments. Another necessary measure is for a center to develop its own business model, in which the duplication of services provided by involved organizations is avoided. Finally, clear guidelines, administrative standards, and specific plans for program operation should be arranged. Also regional characteristics are maintained, but services should be standardized.