• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.320-323
• /
• 2002

This paper discusses process design of cold forging for inner tooth part, drum clutch. In respect to high productivity, low material consumption and low piece production costs, Metal forming has more merits than machining process. Net shape forming is huh technology which satisfies merits of metal forming and achieves high accuracy. Recently, net shape forming method widely applied because of high productivity, low material consumption and low piece production costs using press. In this study, the method which accuracy of drum clutch, automatic transmission pin, can be improved is discussed. First, process variables for process design of drum clutch are selected, and then process design is accomplished using forming analysis method. from forming analysis, forming load, stress, unfiling part is obtained. and comparing these results, optimal process design can be determined.

• KIEAE Journal
• /
• v.3 no.4
• /
• pp.3-14
• /
• 2003

Remodeling for an aged building is emerging as a potential alternative towards the future of the building industry. It is a more effective method than the new construction in environmental friendly view. Most of remodeling were aimed at the improvement of the function of the deteriorated finishing materials. But, at the early stage of remodeling process, energy performance of a building can be improved by adopting passive design solutions such as daylighting and natural ventilation. The purpose of this study is to explain the passive design strategy in remodeling process and to suggest a application of LT method. LT method is an energy-design tool which responds to parameters available early in design development. It provides an output of annual primary energy for lighting, heating, cooling and ventilation in non-domestic buildings. LT method basically uses the concept of passive zone and non-passive zones and should be used to evaluate the energy performance of a number of options and to make comparisons. In this paper, the process of LT method is introduced and investigated an applicability in our office building.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.4
• /
• pp.53-59
• /
• 1990

To suggest the fundamental data for development of the soil improvement method which increases the permeability in aquifer by jet water, laboratory tests were performed. The results obtained are as follows : 1. The diameter of the improved section was maximum value when the time of water jetting was about 4 minutes, and it was not increased according as the time of water jetting was longer than 4 minutes. 2. It appeared that 2.78 mm in diameter of the nozzle was the most optimum size in the condition of using the 1/8 HP - pump and the diameter of improved section in that case was 15.9cm 3. According to removing fine - soil particles, the original soil was improved, suitable to the purpose of improving, and then the permeability of the improved soil was 100 times of that of the original soil. 4. As the improved soil was satisfied to the design criteria of filter materials, the improvement method in this study will be useful for constructing underground collecting channels or underground collecting drainage canals.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.1
• /
• pp.11-20
• /
• 1988

From the engineering point of view, a synthesis as well as an analysis technique is explored to search for the improved design of grillage which is common in ship structure. As an approximate analysis method for the grillage, an interaction reaction method is developed and compared with the finite element method. It is found that the discrepancy between these two methods is so negligible that the percent method could be used effectively for the grillage analysis. As an optimization technique, a feasible direction method could be used is combined with the intersection reaction method in order to design a minimum weight optimal grillage. The feasible direction method shows a good numerical performance although it requires more calculation times compared with the direct search method. Finally, the application of multiple objective optimization method to grillage is investigated in order to resolve conflicts existed between the multiple objectives which is a common characteristic of structure design problem. Goal programming method is extended to handle a nonlinear property of constraints and objective functions. It seems that the nonlinear goal programming could help not only to establish a relative importance of each objective, but also enable the designer to choose the best combination of design variables.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.580-583
• /
• 2002

An improved MPPT converter with current compensation method for small-scaled PV-applications is presented in this paper. The proposed method implements maximum power point tracking (MPPT) by variable reference current which is continuously changed during one sampling period. Therefore, the power transferred to the load is increased above $9\%$ by the proposed MPPT converter with current compensation method. As a result, the utilization efficiency of Photovoltaic (PV)-panel can be increased. In addition, as it doesn't use digital signal processor (DSP), this MPPT method has the merits of both a cost efficiency and a simple control circuit design. Therefore, it is considered that the proposed MPPT method is proper to low power, low cost PV-applications. The concept and control principles of the proposed MPPT method are explained in detail and its validity of the proposed method is verified through several simulated results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.32-38
• /
• 2005

In this research, a procedure to improve the feasibility of design space is proposed by an approximation model. The Chebyshev Inequality is used as the criterion of modification of design space. This procedure is applied to the aero-elastic transonic wing design problem and the feasibility of the design space is greatly improved. Also the optimization results are improved by appling this procedure. That is, the probability to satisfy all imposed constraints is increased and the better design points are included in design space after this procedure. And the use of both a second-order response surface model and the Kriging model is investigated and compared in accuracy, efficiency, and robustness as approximation models in this procedure for different sampling methods. As a result, the second-order response surface model is more appropriate for our application than the Kriging model, because it is linear enough to be fitted well by the response surface model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.83-88
• /
• 2016

In this paper, a design method for a logistics transportation robot based on a modular conveyor rack and path planning considering the environment of a logistics center is proposed. The driving part of the logistics transportation robot is designed and the working method of lifter for the transportation function is explained. The design of the modular conveyor rack is also described and an algorithm for a logistics transportation robot using a modular conveyor rack is suggested. The $A^*$ algorithm is improved by using the concept of rotation cost and the initial state of the transportation robot's characteristics. We experimented with a four-step transportation algorithm for a logistics transportation robot using a modular conveyor rack and showed that the proposed method can be used successfully in a logistics center. In addition, we verified the effectiveness of the improved $A^*$ algorithm considering the rotation cost and the initial state of the robot.

• The Journal of Economics, Marketing and Management
• /
• v.10 no.5
• /
• pp.1-6
• /
• 2022

Purpose: To overcome the question that depends too much on expert's subjective judgment in traditional risk identification, this paper structure the multilevel generalized fuzzy comprehensive evaluation mathematics model of the risk identification of project, to research the risk identification of the project. Research design, data and methodology: This paper constructs the multilevel generalized fuzzy comprehensive evaluation mathematics model. Through iterative algorithm of AHP analysis, make sure the important degree of the sub project in risk analysis, then combine expert's subjective judgment with objective quantitative analysis, and distinguish the risk through identification models. Meanwhile, the concrete method of multilevel generalized fuzzy comprehensive evaluation is probed. Using the index weights to analyse project risks is discussed in detail. Results: The improved fuzzy comprehensive evaluation algorithm is proposed in the paper, at first the method of fuzzy sets core is used to optimize the fuzzy relation matrix. It improves the capability of the algorithm. Then, the method of entropy weight is used to establish weight vectors. This makes the computation process fair and open. And thereby, the uncertainty of the evaluation result brought by the subjectivity can be avoided effectively and the evaluation result becomes more objective and more reasonable. Conclusions: In this paper, we use an improved fuzzy comprehensive evaluation method to evaluate a railroad engineering project risk. It can give a more reliable result for a reference of decision making.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.380-385
• /
• 1996

The genetic algorithm(GA) is applied to the design of the nuclear power control system. The reactor control system model is described in the LQR configuration. The LQR system order is increased to make the tracking system. The key parameters of the design are weighting matrices, and these are usually determined through numerous simulations in the conventional design. To determine the more objective and optimal weightings, the improved GA is applied. The results show that the weightings determined by the GA yield the better system responses than those obtained by tile conventional design method.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2181-2186
• /
• 2014

Generally, the motor inside vehicle is exposed to highly ambient temperature and large vibration according to repeatedly starting and stopping for very short time. So, in this paper, the rotor shape design was performed to improve demagnetization endurance by considering the starting current of the Brushless DC (BLDC) Motor through the Finite Element Method(FEM). As a result, the partial irreversible demagnetization was occurred by starting current at the end of Permanent Magnets of the basic model. To solve this problem, the flux barrier design was performed and the flux on the rotor core was limited. Accordingly, demagnetization endurance and operating characteristics were improved.