• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1252-1253
• /
• 2011

The railway signaling system is being converted to the computer system from the existing mechanical device, and the dependency on software is being increased rapidly. Though the size and degree of complexity of software for railway signaling system are slower than the development speed of hardware, it is expected that the size will be grown bigger gradually and the degree of complexity will be increased also. Accordingly, the validation of reliability and safety of embedded software for train control system was started to become influential as the important issue. In this paper, we presented boundary value analysis tool for railway signaling system software, and presented its result of implementation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.312-316
• /
• 2004

In this study, a spatial 3-dof haptic mechanism is implemented. The implemented mechanism does not employ the gear transmissions as velocity reducers for all three joints but uses wire-based transmissions, thereby it is able to minimize the frictions significantly. Also, by employing the structure of the four-bar mechanism to drive third joint from close to the base, the mechanism is able to minimize the inertia effect from the third actuator very effectively. Its kinematic analysis such as position and velocity analyses are performed first. Then, its operating software development, hardware implementation, and the related interfaces between a PC and the implemented Haptic device are completed. To evaluate its potential and its performance as a haptic device, a experiment generating a virtual constraint in a operational task space is conducted and preliminary results are discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.500-507
• /
• 2016

In order to increase the survivability of combatant ship, measuring and analyzing the infrared radiation is important. Consequently, providing analysis report is also important for the progress of the new combatant ship design. This paper proposes a design and software implementation of filtering for the noise reduction of mid-wave IR camera image. We reduced the total test cost by using the suggested software filtering technique instead of hardware replacement or re-calibration. In addition, we enhanced the accuracy of analysis results by adjusting the parameters of software filtering according to the results of filtered image.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.487-492
• /
• 2003

The paper describes on the implementation of marine casualty prediction model that is one of the main part of Korean MArine Casualty FOrecasting System (K-MACFOS). In this work, Cell Distributed Linear-In-the-Parameter (CD-LIP) model is proposed and discussed its usability with comparing Baltic model and revised LIP model. As evaluation results by regression analysis of variance, it is known that the CD-LIP model gives best performance to the marine casualty numerical D/B of the target sea area.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.547-549
• /
• 2008

This paper presents a implementation of the monitoring program for the analysis of electric consumption characteristics in home appliances, which uses a Labview program from National Instruments Corporation. It is can provide to be easy for small-scale researcher, development groups or individual researcher to analyze electric power consumption characteristics. Also, this paper apply to actual private home and then, analyze result of monitoring and a database result of power quality etc, like the power consumption form, power factor and harmonic which follow season, and time zone. For this measured the apartment where the family which is four lives in the object.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.321-340
• /
• 2013

The purpose of this study was to investigate elementary school teachers'concern and implementation of differentiated instruction of mathematics. To achieve the purpose, this study applied measurements of CBAM, including Stages of Concern Questionnaire and Innovation Configurations Checklist, to 133 elementary school teachers. The results indicated that most teachers were in awareness stage, which meant they had little concern on differentiated mathematics instruction. As well as, analysis on innovation configurations revealed that b and c variation, each referred to fidelity to and deviance from national curriculum standard relatively, were dominant in their instruction. Based on the results, the study suggested implications on future policies and teacher training for differentiated mathematics instruction.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.375-378
• /
• 1996

Robot control software is a hard real-time system that must output the planned trajectory points within an explicit short time period. In this paper, we present a design and implementation method for robot control software using commercial real-time operating systems, RTKemel 4.5. Therefore, various robot motions, efficient user interface, and system failure check are easily implemented by using multitasking function, intertask communication mechanism, and real-time runtime libraries of RTKernel. The performance analysis of commercial real-time operating system for robot control is presented based on Timed Petri net(TPN) and we can use these results to design an optimal system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.96-102
• /
• 1995

This paper presents the VHSIC Hardware Description Language(VHDL) implementation of the Fixed Point Covariance Lattice(FLAT) algorithm for an Linear Predictive Coding(LPC) analysis and its related algorithms, such as the forth order high pass Infinite Impulse Response(IIR) filter, covariance matrix calculation, and Spectral Smoothing Technique(SST) in the Vector Sum Exited Linear Predictive(VSELP) speech coder that has been Selected as the standard speech coder for the North America and Japanese digital cellular. Existing Digital Signal Processor(DSP) chips used in digital cellular phones are derived from general purpose DSP chips, and thus, these DSP chips may not be optimal and effective architectures are to be designed for the above mentioned algorithms. Then we implemented the VHDL code based on the C code, Finally, we verified that VHDL results are the same as C code results for real speech data. The implemented VHDL code can be used for performing logic synthesis and for designing an LPC Application Specific Integrated Circuit(ASOC) chip and DsP chips. We first developed the C language code to investigate the correctness of algorithms and to compare C code results with VHDL code results block by block.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.5
• /
• pp.84-94
• /
• 2010

Partnering concept has been mentioned as an innovative arrangement that helps to reduce many of the disadvantages of the traditional arrangement. Partnering in construction has been widely applied in Vietnam from late 1990s. The application of the new has arrangement spread thanks to anecdotal proofs. This concept is quite new to Vietnamese practitioners. It is necessary to conduct study as a lesson-learn of the industry to encourage the partnering implementation. This paper attempts to develop a model, using discriminant analysis, which classifies the partnering in construction projects into success levels. Dedication, teamwork, sufficiency, and balance are the four significant components in discriminant model. The proposed model is helpful to practitioners in developing, adjusting and improving their strategy for partnering implementation.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.3
• /
• pp.1-9
• /
• 1993

This paper discusses issues on the disign and implementation of real-time automatic speaker verification system, as well as the performance analysis of the implemented system. The system employs TI's TMS320C25 digital signal processor TMS320C25 and high speed SRAMs. The system is designed to be used stand-alone as well as via hand-shaking with IBM-PC. The speech parameters used for speaker verification are PARCOR and LPC-cepstrum coefficients, and the employed decision logics are those based on the generalized weighted distance comcept. The implemented system showed the performance of 5.3% error rate for the PARCOR coefficient, and 4.7% error rate for the LPG-cepstrum coefficient.