• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권5호
• /
• pp.349-354
• /
• 2011

Introduction: Mandibular third molar extraction is one of the most common procedures performed in oral and maxillofacial surgery units. Although the overall complication rate is low with most complications being minor, mandibular third molar removal is so common that the population morbidity of complications might be significant. Therefore, efforts to limit intraoperative or postoperative complications might have a significant impact in terms of enhancing the patient outcome. The aims of this study were to identify the position and angulation associated complications after mandibular third molar extractions. Materials and Methods: This study surveyed 568 patients who had a mandibular third molar extracted, showed clinical complications and underwent a radiographic measurement of the available space, depth and spatial relationship. Results: The results obtained were as follows: 1. The complications were a dry socket, nerve injury, root rest, infection, bleeding, hamatoma, and adjacent teeth injury. 2. There were no significant differences between the complication and ramus relationship (available space) of the mandibular third molar. 3. There were no significant differences between the complications and depth of the mandibular third molar. 4. There were no significant differences between the complications and spatial relationship of the mandibular third molar. Conclusion: There were no significant differences in the complication rate, ramus relationship, depth and spatial relationship of the mandibular third molar. This suggests that the position and angulation of the mandibular third molar may not have an impact on the complications. The relationship between the position and angulation of the mandibular third molar, and complications deserves a further study using longitudinal data.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.203-218
• /
• 2004

The purpose of this study was to analyze the comparisons of the kinematical variables when performing Yoko Ukemi(side breakfall) by three Stage in Judo. The subjects were four male judokas who were trainees Y. I. University Squad members and the Yoko Ukemi were filmed by two S-VHS 16mm video cameras(60fields/sec.). The selected times were subject to KWON 3D analysis program and kinematical analysis to compare variables of three Yoko Ukemi. Temporal variables(total time-required : TK, TR by each phase), the body part touched order on the mat and COG variables were computed through video analysis while performing right Yoko Ukemi by three stage. From the data analysis and discussion, the following conclusions were drawn : 1. Temporal variables : total time-required(TR) when performing Yoko Ukemi(side breakfall) by each stage, the first stage(full squat posture: FP : 1.11sec.) showed the shortest time, the next was 3rd(Shizenhontai, straight natural posture: NP : 1.41sec.), and 2nd(Jigohontai, straight defensive posture, DP : 1.42sec.), respectively- 2. TR when performing Yoko Ukemi(side breakfall) by each stage, and phase : the first phase(take of phase, average 0.68sec.) showed the longest time, next was the third phase(ukemi phase, 0.39sec.), and the second phase(air phase, 0.23sec.), respectively. 3. When performing yore Ukemi the body part touched order and TR on the mat : hip(0.94sec.) showed the shortest time, the next was elbow hand(0.97sec.), back(0.98sec.), and shoulder(1.04sec.) order. The hip part touched on the mat the first, but slap the mat in order to alleviate the shock try hand palm and forearm before receiving impact (difference 0.03sec,) 4. Vertical COG variables in each event by each stage : e1(ready position, average 78.33cm) moved the highest, the next was e2(jumping position, 70.14cm), e3(transition position, average 64.00cm), e4(landing position, average 35.99cm), and e5(ukemi position, average 18.32cm) order, gradual decrease respectively. And the difference of COG were showed in initial by each stage, because position fo Yoko Ukemi was difference by each stage in preparation position, but in accordance with executing of Ukemi phase that difference of COG was by decreasing, almost equal displacement in e4(landing) and e5(Ukemi)position finally.

• 대한한의학원전학회지
• /
• 제27권4호
• /
• pp.29-38
• /
• 2014

Objectives : In ministerial-fire theory(相火論) of Zhu Dan-Xi(朱丹溪), the meanings of monarch-fire(君火) and ministerial-fire(相火) described in papers published nowadays are not the same. Therefore, it is necessary to rebuild a clear concept. Methods : To understand the relationships among 'heaven(天)'-'human(人)' and 'name(名)'-'position(位)', the core concept of the ministerial-fire theory(相火論) of Zhu Dan-Xi(朱丹溪), I examined the relationships between 'heaven(天)' and 'human(人)' in Neo-Confucianism(性理學) of Song(宋) Dynasty and reviewed the notes of Wang Bing(王冰) which were quoted by Zhu Dan-Xi(朱丹溪) to set the concept of monarch-fire(君火) and ministerial-fire(相火). I studied relevant texts. Results : In ministerial-fire theory(相火論) of Zhu Dan-Xi(朱丹溪), monarch-fire(君火) is perceived as being from greed(人欲) that can cause hyperactivity(妄動) of ministerial-fire(相火), whereas ministerial-fire(相火) is perceived as being able to control monarch-fire(君火) by following the orders from heaven. This point of view is different from the past which recognized monarch-fire (君火) as the owner and ministerial-fire(相火) as the servant. Conclusions : Zhu Dan-Xi(朱丹溪) received the ideological impact of Neo-Confucianism, and accepted the notes of Wang Bing, recognized monarch-fire(君火) as 'name(名)' and ministerial-fire(相火) as 'position(位)', so he voiced the ministerial-fire theory(相火論) that perceived monarch-fire(君火) as fire(火) of the five processes(五行) of human body that came from greed, ministerial-fire(相火) as being in a position to hear the order from the 'heaven(天)' to control monarch-fire(君火). But the concept of ministerial-fire(相火) which he set connoted a confusing meaning of 'nature(性)' and 'way(道)' of Neo-Confucianism. In the later process to solve the problem, life-gate theory(命門學說) was raised, and many researchers had tried to remove the meaning of hyperactivity from the ministerial-fire(相火).

• Physical Therapy Rehabilitation Science
• /
• 제9권1호
• /
• pp.25-35
• /
• 2020

Objective: To compare the effects of joint mobilization, gym ball exercises, and breathing exercises on breathing pattern disorders and joint position sense in persons with chronic lower back pain. Design: Three-group pretest-posttest design. Methods: Thirty-six individuals with chronic low back pain who were undergoing a postural correction and vertebral movement at a rehabilitation center participated in this study. The subjects were randomly divided into the joint mobilization group (n=12), gym ball exercises group (n=12), and the breathing exercises group (n=12). The exercises were applied for 40 minutes a day, twice a week for a total of 12 weeks. Measurement tools included the end-tidal CO₂ (ETCO₂), respiration rate (RR), breath hold time, Nijmegen Questionnaire (NQ), excursion, and joint position error (JPE). Results: The groups showed significant differences in the ETCO₂, RR, NQ, Excursion and JPE test before and after the intervention (p<0.05). The differences between the groups were significant in the group that received the gym ball and breathing exercises in ETCO₂ and RR (p<0.05). The differences between the groups were most significant in the group that received breathing exercises in NQ and excursion (p<0.05). The differences between the groups were significant in the group that received the gym ball and breathing exercises in JPE Lt. and Rt. (p<0.05). Conclusions: All three interventions had a significant impact on the biomechanical changes, respiratory variables, and joint position sense in participants with chronic lower back pain. Breathing exercises were found to be particularly effective in improving respiratory parameters.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.448-455
• /
• 2019

본 연구는 오르막 퍼팅 시 좌, 우 경사에 따른 볼의 움직임이 어떻게 변화되는지에 대해 알아보는 것을 목적으로 한다. 본 연구를 위해 한국프로골프협회에서 15년 이상의 골프경기 경험이 있는 피험자들이 참여하였고, 본인들의 퍼터를 이용하여 실제 그린과 유사한 환경에서 퍼팅 동작을 수행하였다. 비디오 카메라를 이용하여 피험자들의 오르막 그린 경사에 따른 퍼팅 동작을 수집 후 동작분석을 실시하였으며, 통계적 유의수준을 a=.05로 설정하였다. 연구결과로 좌, 우 경사별 오르막 퍼팅에서 볼의 위치가 왼쪽에서 오른쪽으로 위치 할 때 볼 움직임의 속도와 각속도가 증가하는 것이 확인되었으며, 여러 경사도 중 성공률을 높여야 하는 오르막 퍼팅에서 경사에 따른 어드레스 볼 위치를 변화할 때, 임팩트 시 클럽 페이스와 볼 움직임이 어떻게 변화하는지를 검증하고, 현장적용 측면에 도움을 주는 과학적 자료를 제시하고자 본 연구를 진행하였다.

• 한국안전학회지
• /
• 제36권1호
• /
• pp.9-17
• /
• 2021

This study analyses the load imbalance of the tower crane used in telescoping work for structural safety, owing to the difference in wind speed and balance weight position. This is because wind speed and position of the balance weight have a significant impact on the structural stresses of a tower crane during telescoping work. Therefore, structural analysis was performed on the 290HC model, which is often used at construction sites and has only one cylinder installed. Moreover, two models were classified to determine the load acting on the connecting part of the telescopic cage to slewing platform and the cylinder. Five types of balance weight positions were applied at regular intervals from jibs; moreover, four types of wind load criteria were differently applied. Hence, the telescopic cage columns were destroyed at all balance weight positions at a wind speed of 30 m/s and only at certain locations at a wind speed of 20 m/s. Furthermore, failures occurred for cylinders, torsional, and bending at wind speeds of 30 m/s and 20 m/s, load imbalances above the allowable thresholds considering the safety factor. In addition, the load imbalance in the telescoping work also varied depending on the position of the balance weights. The results of these studies have validated that the current standards of adjusting the appropriate position of the balance weights on the jib are completely valid, with the telescoping work to be executed only at wind speeds of less than equal to 10 m/s.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.58-62
• /
• 2022

Metro subway construction is a field that requires a great deal of professional manpower. The aging of professionals has a negative impact on both productivity and health, owing to poor working environments, heavy lifting, underground work, and other factors. To address this issue, the government is progressively revising and enforcing health management law and regulation in the construction industry. Thus, the job stress and work ability of many professional subway construction workers, who are rapidly aging, are being analyzed to ensure their safety and improve their health. In this study, the Macpa stress index of Busan Metro Subway construction workers from Sasang to Hadan line was measured by using a Macpa measurement machine, and a work ability survey was conducted by using the questionnaire that was developed by the FIOH. The independent variables were age, years of service, job position, employment type, and occupation. While, the dependent variables were the Macpa stress index and work ability. The Kruskal-Wallis test was used because it was difficult to assume that the statistics of this study represented a normal distribution. The results showed that age, job position, and employment type affected Macpa stress index and revealed that as the age of the workers increased, their stress levels increased as well. Additionally, job position and employment type affected the work ability of the metro subway construction workers. In terms of job position, the technical engineers were under a lot of stress, and whereas the managers had the best work ability. The technical engineers were more stressed than the other workers because of a poor working environment. In terms of employment type, daily workers were under more stress and lower work ability than others.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권5호
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• 한국전산구조공학회논문집
• /
• 제34권3호
• /
• pp.137-149
• /
• 2021

장교는 공공성이 매우 높은 사회기반시설물로 운용 중 안전성 확보가 필수적이며, 붕괴 또는 파손 시 신속한 대처가 필요하다. 사장교의 붕괴 또는 파손을 야기시킬 수 있는 원인은 크게 자연재난과 사회재난으로 분류할 수 있다. 이 중 사회재난에 속하는 충돌사고는 차량이 교량 하부구조인 교각에 충돌하는 사고, 항공기의 결함으로 인한 추락사고 등이 있을 것이며, 해상교량의 경우 주탑 하단에서의 선박 충돌사고가 있을 것이다. 본 연구에서는 수치해석적 접근법을 기반으로 항공기 충돌에 대한 사장교의 구조거동을 평가하는 절차를 제안하고, 충돌해석을 수행하여 절차의 타당성을 보였다. 제안된 절차에는 1) 적절한 항공기 충돌 시나리오 설정, 2) 사장교의 복잡한 거동 메커니즘을 고려한 구조 모델링, 3) 충돌해석을 통한 구조거동 평가가 포함된다. 해석 결과, 본 연구에서 설정한 시나리오는 대상 교량에 큰 영향을 미치지 못하는 것으로 나타났지만, 향후 다양한 시나리오를 통한 충돌해석을 수행한다면 교량에 심각한 손상을 일으키는 하중 위치 및 임계 하중 수준을 결정할 수 있을 것으로 판단한다. 본 연구에서 수행한 충돌해석 절차를 바탕으로 사장교에서 발생하는 항공기 충돌에 대한 간접적인 평가가 가능할 것으로 기대된다.

• 한국운동역학회지
• /
• 제19권2호
• /
• pp.311-322
• /
• 2009

본 연구는 골프 기술 가운데 하나인 페이드샷에 대하여 3차원 영상분석을 시도하여 비교분석한 연구이다. 연구 대상은 남자 프로 골프선수 3명을 대상으로 하였으며 7번 아이언으로 국한하여 실험을 실시하였다. 이때 운동학적 주요 변인들을 산출하여 그 변인들에 대한 특성을 파악하고 지도자와 선수들에게 자료를 제공함으로써 효과적인 지도 방법 및 원리를 제공하는데 목적을 두었다. 그 결과 클럽헤드의 궤도는 아웃사이드에서 인사이드의 형태로 나타나 클럽헤드의 궤적이 이상적인 패이드 샷에 영향을 미치는 것으로 판단된다. 신체중심은 후방으로의 움직임이 나타날 때 실패의 가능성이 높은 것으로 나타나 전방으로의 중심이동이 성공요인에 긍정적인 영향을 미치는 것으로 판단된다. 코킹은 임팩트 후 자연스럽게 팔로스로우를 하여 손목을 풀어 주었으며 움직임의 순서에서 어깨 동작이 먼저 이루어지고 허리가 따라가는 형태로 나타났다. 고관절 각속도는 지연히팅으로 인한 자연스러운 페이드샷이 이루어지는 형태와 일치되었으며 클럽헤드의 속도 또한 임팩트시 코킹이 풀리면서 빠른 것으로 나타났다.