• Strategy21
• /
• 통권43호
• /
• pp.5-28
• /
• 2018

The tensions between the U.S and China, which form the two pillars of the G2 era, seem to have persisted even after the Trump administration inaugurated. The strong confrontation between the two in recent foreign security issues may drive to develop an inadvertent military conflict, and it is high likely to occur in the maritime are. The purpose of this study is not only to analyze the balance of modernized naval forces in the PLAN through naval strategy changes and weapons system modernization trend, but also to predict the impact of the geographical proximity difference on the balance of naval forces in the disputed areas. It examined the impact of distance and geography on naval power by assessing the modernization pattern of the PLAN and capabilities in the context of two scenarios at different distances from China by 2020: one centered on Taiwan and the other on the Spratly Islands. The PLAN's strategy had impact on operational concept and forces construction. First, from the viewpoint of operation operational concept, it can be seen that the passive defense is changing into active defense. Second, in terms of power construction, it can threaten the surface and submarines of U.S power from a distance. And they generated follow three features; The ocean is not the focus of Chinese submarines, Horizontal and vertical expansion of Chinese naval vessels, The improvement of the suppression ability as the Chinese naval modernization ratio increases. The strength of the PLAN is dominant over the U.S in terms of reserves, and it can complement the qualitative deterioration by utilizing nearby bases in the vicinity of the mainland, such as the Taiwan Strait. However, due to the shortage of aircraft carriers, there is a possibility that it will take some time to secure the advantage of air and ocean in the amphibious operation. Therefore, as the dispute is prolonged, China may fail to achieve its original goal. In addition, the lack of cutting edge Commanding Ships may bring to weaken the C2 capabilities. At results, it is expected that PLAN will not be able to have a superiority in the short term due to lagging behind U.S advanced technology. Nevertheless, PLAN has strengthened its naval power through modernization sufficiently and it is highly likely to use force. Especially, it is more likely in the region where the naval power operation like the Taiwan Strait is possible with the almost equality to that of the United States. China will continue to use its naval forces to achieve a rapid and decisive victory over U.S in the close area from the land.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.483-492
• /
• 2014

Uncomfortable feelings of occupants by indoor floor impact noise in a residential building are not accurately represented by the floor impact noise from a standard impact source. It is due to the characteristics of standard impact sources, which are different from the impact forces produced by occupants. It varies significantly by impact source, and it is not easy to be replicated for testing. As a result, the indoor floor impact noise under different acoustic conditions cannot be directly compared. Using frequency response function(FRF), which represents the input-output relationships of a dynamic system, it is possible to examine the characteristics of the system. Especially, FRF can predict the response of a linear dynamic system subjected to various excitation. To determine the relationship between impact force and the corresponding response of dynamic system in residential building, the acceleration response of a concrete slab and the floor impact noise in the living room, produced by bang-machine and rubber-ball excitation, were measured. The test results are compared to the estimates based on FRF and impact force spectrum.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.583-592
• /
• 2018

Today, buildings are exposed to the effects such as explosion and impact loads. Usually, explosion and impact loads that act on the buildings such as nuclear power plants, airports, defense industry and military facilities, can occur occasionally on the normal buildings because of some reasons like drop weight impacts, natural gas system explosions, and terrorist attacks. Therefore, it has become important to examine the behavior of reinforced concrete (RC) structures under impact loading. Development of computational mechanics has facilitated the modeling of such load conditions. In this study, three kinds of RC walls that have different geometric forms (square, ellipse, and circle) and used in guardhouses with same usage area were modeled with Abaqus finite element software. The three configurations were subjected to the same impact energy to determine the geometric form that gives the best behavior under the impact loading. As a result of the analyses, the transverse impact forces and failure modes of RC walls under impact loading were obtained. Circular formed (CF) reinforced concrete wall which has same impact resistance in each direction had more advantages. Nonetheless, in the case of the impact loading occurring in the major axis direction of the ellipse (EF-1), the elliptical formed reinforced concrete wall has higher impact resistance.

• 항공우주기술
• /
• 제6권1호
• /
• pp.19-28
• /
• 2007

본 연구에서는 올레오-뉴메틱(Oleo-pneumatic) 완충장치와 차등 제동 조향(Differential Braking Steering)을 위한 캐스터링 휠 포크(Castering Wheel Fork)가 적용된 소형항공기용 전방착륙장치의 충격하중 해석을 위한 비선형 2 자유도 수학적 모델을 생성하고, 수치해석 기법을 이용하여 시간에 따른 충격응답을 구하였다. 생성된 전방착륙장치의 수학적 모델은 타이어의 충격 시 동적 특성과 스트루트 기울기, 캐스터에 의한 모멘트, 타이어 접촉과 조향 등에 의해 발생하는 측면하중에 의한 올레오 스트루트 내부의 마찰 특성 등의 비선형 요소들을 포함하고 있다. 또 생성된 운동방정식의 수치해석은 4차 Runge-Kutta 방식을 이용하였으며, 운동방정식 및 수치해의 정확도를 평가하기 위한 타 항공기에 기 적용된 전방 착륙장치의 낙하시험 결과와의 비교 검증과정을 수행하였다.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.41-55
• /
• 2005

In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Regional change of force acting, in address, is evenly distributed on both feet. In back swing top, 76% on right foot, 75% on left foot as impact, and 86% on left foot as finish. As regional force acting, in address, pros get high marks on rare and inside of right foot and rare and outside for amateurs. In back swing top, it is higher as fore and inside of left foot, pros as rare part of right foot and amateurs as forefoot. In impact, it is higher for pros and amateurs in outside and rare part of left foot and fore and inside of right foot. In finish, for both pros and amateurs, it is higher for outside and rare parts of left foot. 2. For each club, forces are evenly distributed on both feet in address. In back swing top, the shorter a club is, the higher impact on right foot and the higher finish distribution on left foot. For all the clubs used, in each region, pros get higher on rare and inside of right foot and as amateurs on rare and outside of left foot in address. In back swing top, for all clubs, pros get higher on rare and outside of right foot as fore and outside for amateurs. In impact acting, for all clubs, rare and outside of left foot get higher. In finish, force concentrates on rarefoot. 3. On both feet force, right foot forces of amateurs is higher than those of pros in back swing top. In impact and finish, pros get higher on left foot.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.629-636
• /
• 2001

In order to investigate the possibility of impact punching in brittle materials, an experimental setup was developed. In the setup, a long bar as a punch was used to apply the impact load to the specimen plate and measure the applied impact force during the impact punching process. Impact punching tests with various shape of punches were performed in soda-lime glass and silicon wafer under a different level of contact pressure. The damage appearance after the impact punching was examined according to the applied contact pressure. The minimum contact pressure required for a complete punching in glass specimens without development of radial cracks around the punched hole was sought at each condition. The minimum contact pressure increased with increasing the thickness of specimens and decreasing the end radius of punches. The profile of impact forces was measured during the impact punching experiment, and it could explain well the behavior of the punching process in brittle material plates. The measured impact force increased with increasing the contact pressure applied to the plates.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.359-371
• /
• 1994

A drop weight type impact test system is designed and set up to experimentally investigate impact responses of composite laminates subjected to the low-velocity impact. Using the test system, the impact velocity and the rebound velocity of the impactor as well as the impact force history are measured. An error of the measured data due to a difference in measuring position of the sensor is corrected and, for the estimation of real contact force history, a method of correcting an error due to friction forces is developed. Experimental methods to fix the boundary edgy of laminate specimens in impact testing are investigated and the impact tests on the specimens fixed by those methods are performed. Impact force histories and dynamic strains measured from the tests are compared with numerical results from the finite element analysis using the contact law. Consequently, the nonlinear numerical results considering the large deflection effects are agreed with the experimental results better than the linear ones.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.159-166
• /
• 2005

The vibration on building structures due to exciting vibration forces has been studied only for the vibration level on existing buildings. Recently, several researches have been performed on the prediction of vertical vibration on structures by using an analytical method. However, these studies have been focused on mainly the vibration analysis through analytical modeling of structures. This study aims to investigate the characteristics of vertical vibration transfer in terms of the directions of transfer(upward transfer and downward transfer) on the shear wall building structures due to 2 type vibration forces. In order to examine the characteristics of vertical vibration transfer, the mode analysis and the impact experiment were conducted several times on one building structure. The results of this study suggest that the characteristics of vertical vibration transfer are different in terms of the directions of transfer.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.439-445
• /
• 2017

Plunging breaker slamming pressures on vertical or sloping sea dikes are one of the most severe and dangerous loads that sea dike structures can suffer. Many studies have investigated the impact forces caused by breaking waves for maritime structures including sea dikes and most predictions of the breaker forces are based on empirical or semi-empirical formulae calibrated from laboratory experiments. However, the wave breaking mechanism is complex and more research efforts are still needed to improve the accuracy in predicting breaker forces. This study proposes a semi-empirical formula, which is based on impulse-momentum relation, to calculate the slamming pressure due to plunging wave breaking on a sloping sea dike. Compared with some measured slamming pressure data in two literature, the calculation results by the new formula show reasonable agreements. Also, by analysing probability distribution function of wave heights, the proposed formula can be converted into a probabilistic expression form for convenience only.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.115-119
• /
• 2001

The simulation of motion responses of a dolphin-moored ocean structure in shallow water when it cllides with a ship, has been carried out. The equation of motion in the time domain according to Cummin's theory is employed, and solved by making use of the Newmark-${\beta}$ method. The added mass and damping coefficients involved in the equations are abtained from a three-dimensional panel method in the frequency domain. The impact forces due to ship collision are calculated using both the elastic and non-elastic modelings. The mooring forces for dolphin systems of ocean structure are regarded as linear spring forces.