• KSBB Journal
• /
• v.8 no.4
• /
• pp.328-335
• /
• 1993

A flow injection analysis(FIA) system was developed for the determination of cholesterol using immobilized cholesterol oxidase and cholesterol ester hydrolase. The enzymes were immobilized on controlled pore galas(CPG) by the glutaraldehyde method. The glass colunms packed with immobilized enzymes were found to contain 3-5 I.U. for each enzyme. A hydrogen peroxide sensitive electrode was contructed and applied to the FIA system. The operational conditions for FIA response were investigated and optimized with variation of sampling volume, flow rate and composition of carrier solution. The FIA response were linear upto 60 and 400mg/m1 for free cholesterol and cholesterol ester, respectively. All samples were analyzed with a good precision (<2.5% CV) and accuracy. 23 samples were mea sured succesively within about an hour. Intermittent assays of more than 500 times caused 50% decrease in response sensitivity.

• Clean Technology
• /
• v.21 no.4
• /
• pp.224-228
• /
• 2015

Phospholipase D (PLD) was immobilized on a submicro-porous membrane through covalent immobilization. The immobilization was conducted on the porous membrane surface with the treatment of polyethyleneimine, glutaraldehyde, and the anhydrase, in sequence. The immobilization was confirmed using X-ray photon spectrometer. The pH values of phosphatidylcholine (PC) dispersion solution with buffer were monitored with respect to time to calculate the catalytic activities of PC for free and immobilized PLD. The catalytic rate constant values for free PLD, immobilized PLD on polystyrene nanoparticles, and immobilized PLD on a porous cellulose acetate membrane were 0.75, 0.64, and 0.52 s^-1, respectively. Reusability was studied up to 10 cycles of PC hydrolysis. The activity for the PLD immobilized on the membrane was kept to 95% after 10 cycles, and comparable to the PLD on the nanoparticles. The stabilities for heat and storage were also investigated for the three cases. The results suggested that the PLD immobilized on the membrane had the least loss rate of the activity compared to the others. From these studies, the porous membrane was feasible as a carrier for the PLD immobilization in the production of phosphatidic acid.

• Environmental Engineering Research
• /
• v.10 no.5
• /
• pp.213-226
• /
• 2005

To treat wastewater efficiently by a one-step process of nitrogen removal, a new bacterial strain producing $N_2$ gas from ${NH_4}^+$ under an aerobic condition was isolated and identified. The cell was motile and a Gram-negative rod, and usually occurred in pairs. By 16S-rDNA analysis, the isolated strain was identified as Enterobacter asburiae with 96% similarity. The isolate showed that the capacity of $N_2$ production under an oxic condition was approximately three times higher than that under an anoxic condition. Thus, the consumption of ${NH_4}^+$ by the isolate was significantly different in the metabolism of $N_2$ production under the two different environmental conditions. The optimal conditions of the immobilized isolate for $N_2$ production were found to be pH 7.0, $30^{\circ}C$ and C/N ratio 5, respectively. Under all the optimum reaction conditions, $N_2$ production by the immobilized isolate resulted in reduction of ORP with both the consumption of DO and the drop of pH. The removal efficiencies of $COD_{Cr}$, and TN were 56.1 and 60.9%, respectively. The removal rates of $COD_{Cr}$, and TN were the highest for the first 2.5 hrs with the removal $COD_{Cr}/TN$ ratios of 32.1, and afterwards the rates decreased as reaction proceeded. For application of the immobilized isolate to a practical process of ammonium removal, a continuous operation was executed with a synthetic medium of a low C/N ratio. The continuous bioreactor system exhibited a satisfactory performance at 12.1 hrs of HRT, in which the effluent concentrations of ${NH_4}^+$-N was measured to be 15.4 mg/L with its removal efficiency of 56.0%. The maximum removal rate of ${NH_4}^+$-N reached 1.6 mg ${NH_4}^+$-N/L/hr at 12.1 hrs of HRT(with N loading rate of $0.08\;Kg-N/m^3$-carrier/d). As a result, the application of the immobilized isolate appears a viable alternative to the nitrification-denitrification processes.

• Microbiology and Biotechnology Letters
• /
• v.21 no.4
• /
• pp.373-380
• /
• 1993

When the cells of yeast K35 were immobilized in Ca-alginate gel, cell concentration and viability decreased as alginate concentration increased. Considering the results, 2% (w/v) Ca-alginate concentration would be suitable. Among various concentrations of additives and cross-lin-king agent, the addition of 1.67% (w/v) of bentonite together with 0.33% (v/v) of glutaraldehyde (ABG bead) resulted in the highest ethanol production of 1.8%(w/v), using YPD medium containing 2% glucose. ABG bead seemed to be more resistant to phosphate ion than Ca-alginate bead. 0.33%(w/v) of phosphate was a proper concentration for the ethanol production by ABG bead. Scanning electron microscopic observation depicted that the immobilized cells on the bead surface were coated by alginate gel and that the cells in the internal bead were cross-linked with alginate matrix. When repeated-batch culture was performed with ABG bead for 40 days in a packed-bed reactor, ethanol concentration of about 90~110 g/l-gel was maintained. Cell viability was maintained around 70%, and outgrowing cell concentration was below 6.3% of total cell concentration. Consequently, the results showed that ABG head was a potential carrier for continuous production of ethanol compared to conventional Ca-alginate bead.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.646-650
• /
• 1994

Aspergillus terreus NRRL 1960 was immobilized on various alginate gel beads, Celites, and polyurethane foam cubes, and the comparisons were made for the production of itaconic acid according to the types and sizes of each carrier. The levels of itaconic acid produced from Ca- alginate and Sr-alginate were similar, and the addition of bentonite to Ca- and Sr-alginate resulted in an increase of itaconic acid. The addition of 1.67% bentonite and 0.33% starch to Sr-alginate (SABS bead) produced higher level of itaconic acid (11.59 g/1) than other gel beads. A decrease in the size of Celite increased the itaconic acid production, and the smallest size of Celites, R- 634, produced 6.37 g/l of itaconic acid. Among various types of polyurethane foam cubes, HR 08 (2X2X2 cm) produced about 19 g/l of itaconic acid, which was more efficient than other carriers. In a repeated batch culture using immobilized cells on polyurethane foam cubes (HR 08, 2X2X2 cm), the stability of itaconic acid production was maintained up to 4 batches. Also, the possibility of itaconic acid production by continuous culture was shown in a packed-bed reactor.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.1
• /
• pp.110-116
• /
• 2010

Lactic acid (LA) fermentation by Lactobacillus salivarius ATCC 11741 immobilized on loofa sponge (LS) was evaluated. To increase the surface area of LS for cell immobilization, $H_2O_2$ and chitosan were introduced as surface modifying reagents. Four chitosans of different molecular weights were separately coated on LS. All experiments were conducted in shaking flask mode at 100 rpm rotating speed and $37^{\circ}C$ with 5% $CaCO_3$ as a pH regulating agent. The effects of initial glucose concentration were investigated in the range of 20-100 g/l on LA fermentation by free cells. The results indicate that the maximum concentration of LA was produced with 50 g/l glucose concentration. The immobilized cell system produced 1.5 times higher concentration than free cells for 24 h of fermentation. Moreover, immobilized cells can shorten the fermentation time by 2-fold compared with free cells at the same level of LA concentration. At 1% (w/v) chitosan in 2% (v/v) acetic acid, the Yp/s and productivities of various molecular weights of chitosans were insignificantly different. Repeated batch fermentations showed 5 effective recycles with Yp/s and productivity in the range of 0.55-0.85 and 0.90-1.20 g/l.h, respectively. It is evident that immobilization of L. salivarius onto LS permits reuse of the system under these fermentation conditions. Scanning electron micrographs indicated that there were more intact cells on the chitosan-treated LS than on the untreated LS, thus confirming the effectiveness of the LS-chitosan combination when being utilized as a promising immobilization carrier for LA fermentation.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.256-265
• /
• 1993

In this study, it was observed that hydrogen productivity varied with changes of input g1ucose concentration and dilution rate in FBR( Fixed Bed Reactor), and CSTR(Continuous Stirred Tank Reactor). We evaluated and compared reaction rate Parameters and internal external and overall mass transfer resistances of immobilized carrier in both reactors. Apparent $K_m$ decreased with increasing dilution rate in FBR but showed a constant value above $0.4h^{-1}$ of dilution rate in CSTR. The experimental results in FBR showed nearly analogous to those in CSTR, however, the performance of FBR resulted in lower hydrogen productivity and an external effectiveness factor but a higher internal effectiveness factor than in CSTR. The overall effectiveness factor obtained with various input 91ucose concentrations showed similar values in both reactors.

• Microbiology and Biotechnology Letters
• /
• v.47 no.1
• /
• pp.116-124
• /
• 2019

The rapid development of the poultry industry has led to the production of large amounts of manure, which produce substances like hydrogen sulfide ($H_2S$) that contribute to odor pollution. $H_2S$ is a highly undesirable gas component and its removal from the environment is therefore necessary. Sulfur-oxidizing bacteria (SOB) are widely known to remove contaminating $H_2S$ due to their ability to oxidize reduced sulfur compounds. In this study, three potential SOB (designated AH18, AH25, and AH28) that were previously isolated from a hot spring in Malaysia were identified by 16S rRNA gene analysis. Laboratory-scale biological deodorization experiments were conducted to test the performance of the three isolates-in the form of pure or mixed cultures, with the cells immobilized onto alginate as a carrier-in reducing the $H_2S$ from chicken manure. On the basis of 16S rRNA phylogenetic analysis, isolate AH18 was identified as Pseudomonas sp., whereas isolates AH25 and AH28 were identified as Achromobacter sp. The most active deodorizing isolate was AH18, with an $H_2S$ reduction rate of 74.7% (p < 0.05). Meanwhile, the reduction rates for isolates AH25 and AH28 were 54.2% and 60.8% (p > 0.05), respectively. However, the $H_2S$ removal performance was enhanced in the mixed culture, with a reduction rate of 81.9% (p < 0.05). In conclusion, the three potential SOB isolates were capable of reducing the $H_2S$ from chicken manure in the form of a pure culture immobilized on alginate, and the reduction performance was enhanced in the mixed culture.

• Journal of Life Science
• /
• v.22 no.4
• /
• pp.508-515
• /
• 2012

In this study, DEAE-cotton [derivatized by 2-(diethylamino)ethyl chloride hydrochloride (DEAE HCl)] was prepared as a carrier for immobilized $Pichia$ $stipitis$ for ethanol production. When cotton was derivatized with 0.5 M DEAE HCl, the yeast cell suspension was adsorbed at 100% of the initial cell $OD_{600}$. The adsorbed yeast cells were estimated to be 101.8 mg-dry cells/g-DEAE-cotton. In particular, when a flask culture using the immobilized yeast cells was conducted in a glucose and xylose-containing medium, the yeast cells on the DEAE-cotton gradually produced ethanol, according to glucose and xylose consumption; the ethanol yield was approximately 0.33 g-ethanol/g-monosaccharide. Because DEAE-cotton was successfully used as a carrier for ethanol production from a glucose and xylose-containing medium, we expect that this bioethanol production process may be used for the bioethanol production process from the hydrolysate of lignocellulosic biomass. All the results of DEAE-cotton were compared with those of DEAE-cellulose as a carrier for immobilization.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1542-1546
• /
• 2015

The purpose of this study was to investigate the potential of zeolite-supported sulfatereducing bacteria (SRB) in enhancing the removal of Cu²⁺, Ni²⁺, and Cr⁶⁺ in contaminated seawater. Our results show that SRB-immobilized zeolite carriers can enhance the removal of heavy metals. In addition, heavy metals were generally better removed at conditions of 37°C. Cu²⁺, Ni²⁺, and Cr⁶⁺ were effectively removed by 98.2%, 90.1%, and 99.8% at 100 parts per million concentration of the heavy metals, respectively. These results indicate that SRB-zeolite carriers hold great potential for use in the removal of cationic heavy metal species from marine environment.