• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.96.2-96.2
• /
• 2017

This research was conducted to investigate the electrochemical properties of the thin air-formed oxide film-covered AZ31 Mg alloy. In this work, native air-formed oxide films on AZ31 Mg alloy samples were prepared by knife-abrading method and the changes in the electrochemical properties of the air-formed oxide film were investigated in seven different electrolytes containing the following anions $Cl^-$, $F^-$, $SO{_4}^{2-}$, $NO_3{^-}$, $CH_3COO^-$, $CO{_3}^{2-}$ and $PO{_4}^{3-}$. It was observed from open circuit potential (OCP) transients that the potential initially decreased before gradually increasing again in the solutions containing only $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions, indicating the dissolution or transformation of the native air-formed oxide film into new more protective surface films. The Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) showed that there was growth of new surface films with immersion time on the air-formed oxide film-covered specimens in all the electrolytes; the least resistive surface films were formed in fluoride and sulphate baths whereas the most protective film was formed in phosphate bath. The potentiodynamic polarization curves illustrated that passive behaviour of AZ31 Mg alloy under anodic polarization appears only in $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions containing solutions and at more than $-0.4V_{Ag/AgCl}$ in $F^-$ ion containing solution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.2
• /
• pp.69-73
• /
• 2003

To improve the sensory quality of sliced raw fish, the effect of cold brine temperature on the texture properties was investigated. Fishes were immersed in cold brine by various condition and killed instantly by spiking at the head. The onset of rigor-mortis was accelerated by decrease of immersion temperature. Also, the time reaching full rigor was shortened remarkably too. However, the rigor index of samples immersed in the cold brine decreased more than that of samples killed instantly. Rigor index was the highest in samples killed instantly, followed by $0^{\circ}C,\;-5^{\circ}C,\;-10^{\circ}C,\;-12.5^{\circ}C,\;-15^{\circ}C\;and\;-20^{\circ}C$ in that order. The breaking strength of samples immersed in the cold brine increased slowly but did not increase through all the conditions in the samples. Breaking strength of all samples immersed in the cold brine decreased significantly after reaching the maximum values (p<0.05). The lactate content of muscle was increased by the decreased brine temperature, however ATP content decreased. Minimum lactate and maximum ATP content in fish muscle showed at $-12.5^{\circ}C$. Those results demonstrate that optimal temperature for improvement of sliced raw fish quality by cold brine was $-12.5^{\circ}C.$

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.118-128
• /
• 1999

There are many ultrasonic measurement methods that are used in nondestructive testing applications. Some typical applications include material property determination, microstructural characterization. and flaw detection. Ultrasonic parameters such as velocity and attenuation are most commonly required in these applications. The accuracy and repeatability of testing results are dependent on both the hardware used to generate and receive the ultrasonic waves and on the analysis software for calculating these parameters. In this study, five analysis algorithms were implemented on a computer for measuring wave speed in a pulse echo. immersion testing configuration. In velocity measurements comparisons were made between the overlap. cross-correlation. Fourier transform. Hilbert transform, wavelet transform algorithms. Velocity measurement was applied to an isotropic steel sample using the five analysis algorithms. Frequency-dependent phase/group velocity and attenuation were also measured using the Fourier transform and wavelet transform algorithms on a composite laminate containing voids.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.6
• /
• pp.559-565
• /
• 2004

Two different methods were used for the scattering analysis of side-drilled holes(SDH). The scattering models include an explicit model based on the Kirchhoff approximation and the solution of the exact separation of variables. The far-field scattering amplitude was calculated and their time-domain results were compared for the case of shear vertical wave. The exact solution predicts the existence of the creeping wave. The Kirchhoff approximation agreed to the exact solution, except the case of the creeping wave. Two measurement models were introduced to predict the response from the SDHs for the case of immersion, pulse-echo testing. The received voltage was calculated for the case of the shear vertical waves with the incident angle of $45^{\circ}$ to the SDH with the diameter of 1mm, and compared with the experimental results.

• Archives of design research
• /
• v.14 no.3
• /
• pp.117-125
• /
• 2001

The 2D based-web contents are limited to implement interactive elements for the users even though the contents are offered in various styles. Using the mouse and keyboards users chose any web contents for themselves beyond the limitation of time and space. They want more interactive style as they become familiar with convenience of web contents. The 3 dimensional web contents integrated with interactive technologies are one of the ways for them There are many researches and commercialization of the interactive web 30 for the past years because it has a lot of user benefits in terms of immersion, realistic expression, and interactivity. It has two types of implementation; one is for 3D polygon based objects, the other is for virtual worlds. This research is focus of on the concept of web interactive 3D, the technical aspects, design elements, and the proposal of navigation methods for the purpose of creating new type of web interactive contents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5232-5239
• /
• 2015

The purpose of this study is to examine university student's awareness and utilization plan of Smart Learning of the university education. For this purpose, a needs analysis is performed through a survey of 345 university students. Through the survey, first, students of media devices, including the average daily usage time of four hours at the most common smart devices, the intended use was used SNS, games and entertainment, datebook, and more. Second, the benefits of the smart learning, which students learn to recognize the challenges and reducing the burden most common obstacle was the difficulty in immersion classes. Third, the demand for university education smart learning, the most common opinion about the classroom building. On the basis of the above research findings, the utilization plans are proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.257-263
• /
• 2011

Recently as AR(Augmented Reality) is focus of attention, AR is applied to various fields and is expected its valuable use. In this paper, we implemented the system based on Goblin XNA which supports high resolution model file and higher AR. We confirmed the relation of model output among the number of marker, the location and changes of camera distance. And we produced the infantile studying contents using AR and embodied. In implemented contents, we showed the familiar character to infants on each page marker. As the result of it, we can raise their concentration and at a time studying supporters can use the contents easily as well. Also we put 3 marker on each page of contents to recognize it smoothly in case one part of it is hidden by any obstacle. Finally we maximized the learning effect such as presence and immersion in studying through reinforcing 3D models according to the every situation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2008

A study of new materials that are light-weight, high in strength has become vital to the machinery of auto industries. But then, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress. And Influence of corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3$+3.5%HF, $6%FeCl_3$. The immersion period was performed for 365days. The compressive residual stress was imposed on the surface according to each shot velocity based on shot peening, which is the method of improving fatigue life and strength. Fatigue life shows more improvement in the shot peened material than in the un peened material in corrosion conditions. The threshold stress intensity factor range was decreased in corrosion environments over ambient. Compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation. The fatigue crack growth rate of the Shot-peened material was lower than that of the un peened material. Also m, fatigue crack growth exponent and number of cycle of the shot peened material was higher than that of the un peened material. That is concluded from effect of da/dN.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.127-135
• /
• 2015

The development of stereoscopic display hardwares and 3D authoring softwares expands its application areas from particular virtual simulation applications to general movies, games, advertising applications. However, the binocular-based 3D stereoscopic images cause fatigue to viewers. Recent performed many research results about the binocular stereoscopy's depth perception and viewers' fatigue are derived from experimental users studies. In some results, watching and making guidelines for 3D stereoscopic imaging contents are introduced. The 3D stereoscopic-related contents have the contradictory aspects, which are audiences' pursuit of a tolerable minimum fatigue and producer's its of excessive depth changes for providing viewers' immersion. This paper provides user experiments and analysis data in aspects of 3D depth changes. For use of producers, a safety zone and translational velocity of 3D depth changes are introduced. Also, on the viewer side, we present the depth change adaptation time by using an EEG device.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.308-312
• /
• 1999

To develop the effective method for chestnut peeling, we examined the effect of peeling by acid and alkali treatment on their concentration, immersion temperature and time. Furthermore the physical properties of chestnut were investigated. In alkali treatment, 9% NaOH treated at 40$^{\circ}C$ for 9min was the most efficient for peeling outer peel, while acid treatment was less effective. But in the peeling of inner peel, acid treatment was more effective than alkali, especially, 3% HCIO$_4$ treated at 50$^{\circ}C$ for 30 min was the most effective. The correalation coefficient between weight and inner(outer) peel weight was higher than other physical properties, and multiple regression equation was established for predicting inner(outer) peel weight.