• Journal of dental hygiene science
• /
• v.22 no.1
• /
• pp.57-66
• /
• 2022

Background: This study aimed to investigate the effect of selecting commercially available blending teas and applying them to bovine teeth on color change over time. Methods: After selecting healthy bovine teeth, using a cutting-disc, 105 specimens with a dimension of 5×5×3 mm were prepared, and 15 specimens were distributed to each group. Black tea was used as a positive control, water was used as a negative control, and blended tea of five types was used as an experimental group. First, pH and buffering capacity were measured with a pH meter, and tooth color was determined using a spectrophotometer before immersion in the blending tea solution and 1, 5, 7, 14, and 21 days after immersion. Thereafter, the shape change of the enamel surface was observed using a scanning electron microscope, and SPSS ver.26 was used to analyze the color change. Results: The average pH of the five blending teas in the experimental group was 3.78, and the pH of group 3 (strawberry rhubarb) was the lowest at 3.22. The pH levels of black tea and water were 5.19 and 7.30, respectively. The buffering capacity was the highest in group 3 at both pH levels of 5.5 and 7.0. The L^*a^*b^* color change according to immersion time was the largest in group 4 (rooibos yellow flower), and the amount of color change was large in black tea and group 4. As a result of observing the enamel surface of bovine teeth, changes in the surface shape were noted in all groups immersed in the experimental solution for 21 days, except for water. Conclusion: There was a significant difference between the experimental groups in terms of color change according to the immersion time, and color and enamel surface changes were observed in black tea and all experimental groups, except for water.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.108-118
• /
• 2009

Statement of problem: Volume stability, microstructure reproducibility and fluidity along with compatibility with dental stone must be in consideration in order to use tissue conditioner as a material for functional impression. There are few studies concerning the influence of time factor in oral condition on surface roughness of the stone and optimal retention period in the oral cavity considering such changes in surface roughness. Purpose: The purpose of this study was to find out the influence of various kinds of tissue conditioner, its powder/liquid ratio and immersion time on surface roughness of the stone. Material and methods: Materials used in this study were the three kinds of tissue conditioners(Coe-Comfort, Visco-Gel, Soft-Liner) and were grouped into three: group R-mixed with standard powder/liquid ratio that was recommended by the manufacturers, group M-mixed with 20% more powder, group L-mixed with 20% less powder. Specimens were made with the size of 20 mm diameter and 2 mm width. Each tissue conditioner specimens were subdivided into 5 groups according to the immersion time(0 hour, 1 day, 3 days, 5 days, 7 days), completely immersed into artificial saliva and were stored under $37^{\circ}C$. Specimens of which the given immersion time elapsed were taken out and were poured with improved stone, making the stone specimens. Surface roughness of the stone specimens was measured by a profilometer. Results: Within the limitation of this study, the following results were drawn. 1. Major influencing factor on surface roughness of the stone model made from tissue conditioner was the retention period(contribution ratio($\rho$)=62.86%, P<.05) of the tissue conditioner in oral cavity to make functional impression. 2. In case of Coe-Comfort, higher mean surface roughness value of the stone model with statistical significance was observed compared to that of Soft-Liner and Visco-Gel as immersion time changes(P<.05). 3. In case of group L(less), higher mean surface roughness value of the stone model with statistical significance was observed compared to that of R(recommended) and M(more) group as immersion time changes(P<.05). Conclusion: We may conclude that as the retention period of time in oral cavity influences surface roughness of the stone model the most and as the kind of tissue conditioner and its P/L ratio may influence also, clinician should well understand the optimal retention period in oral cavity and choose the right tissue conditioner for the functional impression, thus making the functional impression with tissue conditioner usefully.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.83-90
• /
• 2017

In this paper, we evaluated the solderability of thin electroless nickel-electroless palladium-immersion gold (ENEPIG) plating layer for fine-pitch package applications. Firstly, the wetting behavior, interfacial reactions, and mechanical reliability of a Sn-3.0Ag-0.5Cu (SAC305) solder alloy on a thin ENEPIG coated substrate were evaluated. In the wetting test, maximum wetting force increased with increasing immersion time, and the wetting force remained a constant value after 5 s immersion time. In the initial soldering reaction, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) and P-rich Ni layer formed at the SAC305/ENEPIG interface. After a prolonged reaction, the P-rich Ni layer was destroyed, and $(Cu,Ni)_3Sn$ IMC formed underneath the destroyed P-rich Ni layer. In the high-speed shear test, the percentage of brittle fracture increased with increasing shear speed.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.129-136
• /
• 2023

In this paper, we propose the positive effects of Virtual Reality(VR) sports classes and the foundation for VR sports to become the basis of lifelong sports education through the application of physical education classes in sports virtual reality programs are to be provided. For this purpose, the effect of VR sports experience on sports satisfaction, sports immersion, and sports attitude factors was investigated for 281 elementary school students in Busan. Results It was found that VR sports experience had a significant effect on sports satisfaction, sports satisfaction had a significant effect on sports immersion and sports attitude, and sports immersion had a significant effect on sports attitude. The great advantage of sports virtual reality is that sports activities for items that are difficult to deal with in physical education classes and unpopular items will be easily performed. In addition, by using a program that links physical education classes with English and mathematics, physical education will be recognized as a convergence subject by elementary school students, and at the same time, it will become an integrated subject that can acquire fun elements and learning elements at the same time through play or games.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.2
• /
• pp.110-118
• /
• 2004

The corrosion of pure titanium (CP- Ti Grade 2) and titanium alloy (Ti6Al4V ELI) were studied under various conditions of simulated body fluids. The static immersion test and the electrochemical test were performed in accordance with ISO 10271 : 2001. For the electrochemical test, the open circuit potential was monitored as a function of time, and the cyclic polarization curve was recorded. The corrosion resistance was evaluated from the values of corrosion potential, passivation current density, breakdown potential, and the shape of hysteresis etc. The effects of alloy type, surface condition, temperature, oxygen, and constituents in the fluids such as acid, chloride were estimated. Both specimens had extremely low dissolution rate in the static immersion test. They showed strong passivation characteristics in the electrochemical test. They maintained negligible current density throughout the wide anodic potential range. The passive layer was not broken up to 2.0 V (vs. SCE). The hysteresis and the shift of passivation potential toward the anodic direction was observed during the reversed scan. The passivation process appeared to be accelerated by oxygen in air or that dissolved in the fluids. The passivation also proceeded without oxygen by the reaction of constituents in the fluids. Acid or chloride in the fluids, specially later weakened the passive layer, and then induced higher passivation current density and less shift of passivation potential in the reversed scan. CP-Ti Grade 2 was more reactive than Ti6Al4V ELI in the fluids containing acid or chloride, but thicker layer produced on its surface provided higher corrosion resistance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.297-302
• /
• 2014

The AR(Augmented Reality) is the technique that make the fusion between real world and virtual object. The augmented object on real world can provide the visualization of digital information to user. Also, the real-time AR system makes the interaction between user and computers. Therefore, the immersion of user be increasing and help the information transfer to user with AR system. In this paper, we implement the AR system with the modeled VRML as a three-dimensional object using programming language. The application technique is proposed that augment the various virtual clothes to three-dimensional avatar. Moreover, we propose the novel interface by using marker that can be increase the immersion of user.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.4
• /
• pp.143-147
• /
• 2011

The system using augmented reality can save the time and cost. It is verified in various fields under the possibility of a technology by solving unrealistic feeling in the virtual space. Therefore, augmented reality has a variety of the potential to be used. Generally, multimodal senses such as visual/auditory/tactile feed back are well known as a method for enhancing the immersion in case of interaction with virtual object. By adapting tangible object we can provide touch sensation to users. a 3D model of the same scale overlays the whole area of the tangible object; thus, the marker area is invisible. This contributes to enhancing immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In this paper, sound feedback is considered. By further improving immersion learning augmented reality for children with the initial step learning content is presented. Augmented reality is in the intermediate stages between future world and real world as well as its adaptability is estimated more than virtual reality.

• Natural Product Sciences
• /
• v.20 no.4
• /
• pp.301-305
• /
• 2014

The aim of our study is to investigate the anti-nociceptive and anti-inflammatory properties of an ethanol extract of the leaf and stem of Aralia cordata. Writhing responses induced by acetic acid, tail immersion test, and formalin-induced paw pain response for nociception and formalin-induced paw edema for inflammation were evaluated in mice. A. cordata (50 - 200 mg/kg, p.o.) and ibuprofen (100 mg/kg, p.o.), a positive non-steroidal anti-inflammatory drugs (NSAIDs), inhibited the acetic acid-induced writhing response, but they did not protect the thermal nociception in tail immersion test. However, morphine (5 mg/kg, s.c.) used as positive opioid control alleviated both the acetic acid-induced writhing response and thermal nociception in tail immersion test. In the formalin test, A. cordata (50 - 200mg/kg) and ibuprofen (200mg/kg) inhibited the second phase response (peripheral inflammatory response), but not the first phase response (central response), whereas morphine inhibited both phase pain responses. Both A. cordata (100 mg/kg) and ibuprofen (200 mg/kg) significantly alleviated the formalin-induced increase of paw thickness, the index of inflammation. These results show for the first time that the leaf and stem of A. cordata has a significant anti-nociceptive effect that seems to be peripheral, but not central. A. cordata also displays an anti-inflammatory activity in an acute inflammation model. The present study supports a possible use of the leaf and stem of A. cordata to treat pain and inflammation.

• Corrosion Science and Technology
• /
• v.19 no.3
• /
• pp.138-145
• /
• 2020

Immersion tests of Alloy 600 were conducted in simulated primary water environments of a pressurized water reactor at 325 ℃ for 10, 100, and 1000 h to obtain insight into effects of surface deformation on internal and intergranular (IG) oxidation behavior through precise characterization using various microscopic equipment. Oxidized samples after immersion tests were covered with polyhedral and filamentous oxides. It was found that oxides were abundant in mechanically ground (MG) samples the most. The number density of surface oxides increased with time irrespective of the method of surface finish. IG oxidation occurred in mechanically polished (MP) and chemically polished (CP) samples with thin internal oxidation layers. However, IG oxidation was suppressed with relatively thick internal oxidation layers in MG samples compared to MP and CP samples, suggesting that MG treatment could increase resistance to primary water stress corrosion cracking (PWSCC) from the standpoint of IG oxidation. As a result, appropriate surface treatment for Alloy 600 could prevent oxygen diffusion into grain boundaries, inhibit IG oxidation, and finally induce its high PWSCC resistance.

• Corrosion Science and Technology
• /
• v.21 no.2
• /
• pp.77-88
• /
• 2022

Schiff base quinazoline derivative viz., 3-((2-hydroxy-3-methoxybenzylidene)amino)-2-methylquinazolin-4(3H)-one (SB-Q), was synthesized in this study. Its corrosion protection impact on mild steel (MS) in 1 M hydrochloric acid solution was examined by performing weight loss measurements. The protective efficacy of SB-Q on MS in 1 M HCl was investigated based on its concentrations, immersion period, and immersion temperature. SB-Q was found to be an efficient inhibitor for the corrosion of MS. Its inhibition efficiency was improved by increasing the concentration of SB-Q to an optimal concentration of 500 ppm. Its inhibition efficacy was 96.3% at 303K. Experimental findings revealed that its inhibition efficiency was increased with increasing immersion time, but decreased with an increase in temperature. The adsorption of SB-Q molecules was followed the Langmuir adsorption isotherm model. The adsorption of the examined inhibitor molecules on the surface of mild steel was studied by density functional theory (DFT). DFT investigation confirmed weight loss findings.