• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.04a
• /
• pp.38-39
• /
• 1991

비대칭 다공막은 자체로서 UF혹은 MF용으로 사용될 뿐만 아니라 RO혹은 기체분리용 복합박막의 지지막으로도 사용되기 때문에 비대칭다공막 제조기술은 분리막의 제조에 가장 중요한 것 중의 하나이다. 대부분의 비대칭 다공막은 상반전법에 의하여 제조되며, 상반전법은 균질 고분자용액이 비용매 속에서 두개의 용액상 (고분자 농후 및 희박용액상)으로 분리된 후 비대칭다공막으로 되는 과정을 일컫는다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.69-69
• /
• 2004

Cellulose hollow fiber membranes (CHFM) were prepared from the cellulose/N-methylmorpholine-N-oxide/$H_2O$ system by immersion-precipitation and wet spinning. Different drying methods were carried out to investigate their influences on the properties of CHFM.(omitted)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.2
• /
• pp.99-104
• /
• 2012

The co-precipitation technique has been applied to synthesize biphasic calcium phosphate (BCP). $Ca(NO_3)_2{\cdot}4H_2O$ and $(NH_4)_2HPO_4$ as the starting materials was used. X-ray diffraction (XRD) and Fourier transformed infrared (FT-IR) spectroscopy were used to characterize the structure of as-synthesized and calcined BCP powders. After immersion in Hanks' Balanced Salt Solution (HBSS), for 1 week a precipitation started to be formed with individual small granules on the specimen surface. An MTT assay indicated that BCP powders have no cytotoxic effects on MG-63 cells, and that they have good biocompatibility.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.358-363
• /
• 2003

Spot welded structure is operated in diverse situation because of temperature, humidity and precipitation. In addition factors of environmental pollution such as acid rain, that courses corrosion, have the tendency to increase, But spot welded structure strength is affected by dampness and environment temperatures. Therefore, it is important to evaluate effect of temperature of spot welded part, In this study, the strength distribution of spot welded plates is evaluated about the environmental temperature of zine coated steel plates and test is conducted with welded part immersed in distilled and synthetic sea water. Specimens are immersed into water for 10, 100, 500 and 1000hours to evaluate the effects of water immersion time on tensile-shear strength under the conditions of -40, 0, 20 and $50^{\circ}C$. Strength is evaluated by tensile-shear test. The conditions of spot welding are 240kgf electrode force, 10KA welding current with 0 and 5mm clearance. From this study, spot welded specimens with clearance have lower tensile-shear strength in the distilled water or synthetic sea water comparing with spot welded specimens without clearance. And they have lower tensile-shear strength under $-40^{\circ}C$ and over $50^{\circ}C$.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.36-40
• /
• 2003

An attractive combination of corrosion resistance and mechanical properties in the temperature range -50 to $250^{\circ}C$ is offered by duplex stainless steel. However, undesirable secondary precipitation phase such as $\sigma$, $\gamma_2$ and $Cr_2N$ may taken place at the cooling stage from the welding processes. Therefore, this paper describes the influence of different welding procedures such as manual metal arc welding (MMA), tungsten inert gas welding (TIG) and vacuum brazing on corrosion resistance of the welded joint for UNS S31803 duplex stainless steel. Microstructure and chemical compositions of the welded joint were examined. The weight loss of specimens immersed in 6% $FeCl_3$ solution at $47.5^{\circ}C$ for 24-hours was determined and used to evaluate the pitting resistance of duplex stainless steel and their welds. The region of heat-affected zone of specimen obtained by the MMA is much wider than that resulted from TIG, therefore, the weight loss of welds by MMA was larger than that of weld by TIG. The weight loss of brazed specimens cooled from slow cooling rate was larger than those of specimens cooled from high cooling rate, because the precipitation of $\sigma$ phase. Beside that, the weight loss of brazed specimen is greater than those of the welded specimens. The galvanic corrosion was observed in brazed duplex stainless steel joints in the chloride solution.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.95-108
• /
• 1984

Even though the tarnishing and corrosion problems characteristic with dental silver-palladium alloy are not yet fully solved, it is recently widely used because of its low cost. However the effects of major alloying elements on the various properties of this system are not fully understood. The object of this research is to clarify the effects of In and Zn additives on the corrosion and tarnishing resistances and precipitation hardening behavior of this sytem, using electrodynamic polarization, immersion, and Vicker's microhardness test and X-ray diffraction and electron probe micro analysis methods. The obtained results were as follows: I. As indium content is increased, both the corrosion resistance in Cl-solution and microhardness are also increased while the tarnishing resistance is decreased. 2. As Zinc content is increased, the corrosion resistance is decreased, but tarnishing resistance is increased 3. At 70Ag-25Pd-2.5Zn-2.5In composition, the precipitation harding behavior was mot significant. The optimum aging temperature was $450^{\circ}C$ and the time was 2 hrs. The resulting specimen of this work carried 180VHN. 4. Under the heat treatment, the changes in the mechanical property are due to the changes in the shape and composition of dendrite matrix, namely, it is because of the precipitation hardening behavior which has been proved by electron probe micro analysis and optical microscopic finding.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.231-232
• /
• 1998

The purpose of this study was to examine whether the precipitation of calcium phosphate on titanium surface was affected by surface modification. To improve the bone conductivity, of titanium, samples were devided into 4 groups. Group 1 was immersed in 5M-NaOH solution at $60^{\circ}C$ for 24 hours. Group 2 was immersed in 5M-NaOH solution at $60^{\circ}C $ for 24 hours and heat-treated at $600^{\circ}C$ for 1 hour. Group 3 was anodized in Hanks' solution at 1V, $25^{\circ}C$ for 1 hour. Group 4 was anodized in Hanks' solution at 5V, $80^{\circ}C$ for 5 minutes. And then, all specimens were immersed in the MEM Eagle's medium whose composition was similar to that of extracellular fluid for 30 days. The precipitation of the calcium phosphate on implant surface was increased by the immersion in the NaOH solution, and more highly accelerated by heat treatment at $600^{\circ}C$. The precipitation of the calcium phosphate on titanium implant was increased with the treatment of the anodic oxidation in Hanks' solution at 5V, $80^{\circ}C$.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.181-181
• /
• 2006

We developed a novel method to fabricate a nerve guide conduit (NGC) with the porosity of submicron pore sizes (to prevent fibrous tissue infiltration) and hydrophilicity (for effective oxygen and nutrient permeation) using poly(lactic-co-glycolic acid) (PLGA) and Pluronic F127 by a modified immersion precipitation method designed by our laboratory. It was recognized that the hydrophilized PLGA/F127 (3 wt%) tube can be a good candidate as a NGC from the analyses of its morphology, mechanical strength, hydrophilicity, model nutrient permeability and in vivo nerve regeneration behavior using a rat model.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.53-54
• /
• 1996

비대칭 분리막의 제조에 있어서는 용매와 비용매의 교환에 의한 상분리 현상을 이용하기 때문에 용매와 비용매의 성질이 막 제조 공정에 중요한 변수가 된다. 고분자 용액에 공용매를 첨가할 경우 용액의 점도, 용매와 비용매의 상호 작용 정도 등의 용액의 성질을 변화시킬 수 있다. 따라서 이들의 변화에 따른 분리막의 구조 변화를 관찰하여 그 상관 관계를 규명하면 분리막의 미세 구조 조절 및 제어가 가능할 것이다. 본 실험에서는 폴리이미드(PI)를 고분자로 사용하였고, 용매로는 NMP, 공용매로는 $\gamma$-butyrolactone($\gamma$-BL)을 사용하여 고분자의 농도가 15 wt%인 용액을 제조하였다. 제조한 용액을 유리판에 균일한 두께로 casting 한 후 물을 비용매로 사용하여 immersion precipitation 방법으로 막을 제조하였다. 제조한 막은 24시간 동안 물 속에 방치하여 용매를 충분히 제거한 후 상온에서 24시간 이상 건조시켰다. 투과도 측정은 soap bubble flow 방법으로 시행하였으며 단면 구조는 주사전자 현미경을 사용하여 관찰하였다.

• Membrane and Water Treatment
• /
• v.4 no.2
• /
• pp.83-93
• /
• 2013

In the present investigation, were synthesized composite membranes prepared by simultaneous casting of two polymer solutions using the technique of phase inversion by immersion / precipitation. The support layer was prepared using polyethersulfone and polysulfone as base polymer and for the top layer was used sulfonated polysulfone (SPSU) with 50% sulfonation degree. The morphology of the resulting membranes were characterized by scanning electron microscopy (SEM). The final results showed that it is possible to prepare composite membranes by simultaneous casting of two polymer solutions with adherence between the two layers. Regarding the permeation tests, the developed membranes presented values of hydraulic permeability within the range of commercial nanofiltration (NF) membranes. Values rejection of 80% ammonium ions can be increased by using a SPSU with a greater degree of sulfonation.