• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.128-134
• /
• 2006

Two-dimensional nano-patterns are fabricated using immersion holographic lithography. The photoresist layer is exposed to an interference pattern generated by two incident laser beams($\lambda$=441.6 nm, He-Cd laser) of which the pitch size is less than 200 nm. Good surface profiles of the 2 dimensional patterns are achieved by trimming the lithography process parameters, such as, exposure time, developing time and refractive index of medium liquid.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.127-135
• /
• 2017

PURPOSES: The objective of this study is to evaluate the effect of anti-stripping on asphalt mixtures constituting anti-stripping agents. METHODS : Based on the literature review, asphalt mixture added with anti-stripping agents was prepared, and these asphalt mixtures were evaluated for anti-stripping properties for each anti-stripping agent through various lab tests, namely, tensile strength ratio (TSR), dynamic immersion test, uniaxial compression test, and indirect tensile strength test (IDT). The liquid anti-stripping agents used in the lab test were premixed with each asphalt binder (PG 64-22, PG 76-22) before being mixed with the aggregate. RESULTS :The result of the TSR test revealed that the effect of anti-stripping was highest when hydrated lime and liquid anti-stripping agent W were added. The correlation coefficient $R^2$ between the TSR result and cohesion ratio is 0.99, which indicates that the sensitivity of the TSR to moisture damage is reliable from the mechanical point of view. The covering ratio of the asphalt binder to the liquid anti-stripping agent W was determined to be higher than that to the other liquid anti-stripping agents. CONCLUSIONS :It is considered that the improved moisture resistance of asphalt mixture as a result of the use of anti-stripping agents can reduce the incidence of various pavement damages such as portholes caused by stripping, and the performance life of the asphalt road pavement can be prolonged.

• 한국식품위생안전성학회지
• /
• 제34권1호
• /
• pp.100-105
• /
• 2019

본 연구에서는 곤약 제조시 각 생산단계별, 응고제 및 침지액의 pH에 따른 일반세균, 대장균군 및 식중독균을 확인하고 저장 3개월 동안의 저장안전성을 확인하였다. 곤약의 주원료인 구약감자 분말과 가공용수는 살균과정을 거치지 않아 상당한 수의 일반세균을 포함하고 있으며, 비닐포장은 미생물학적으로 안전한 것으로 판단되었다. 곤약 제조단계별 미생물을 확인한 결과 겔 형태의 곤약 성형단계에서 일반세균이 검출되지 않았는데 이는 첨가된 응고제인 2.0% $Ca(OH)_2$의 높은 pH의 작용에 기인하는 것으로 판단되었다. 이후 모든 공정에서 공정 모두에서 일반세균수가 검출되지 않았다. 대장균군은 시험 전 단계에서 검출되지 않았다. 성형공정에서 곤약의 pH를 9.5~12.5까지 조정하여 굳힌 후 일반세균수를 확인한 결과 pH 11.5보다 알카리 범위에서는 일반세균이 전혀 검출되지 않았다. 침지액의 pH 범위를 10.0~12.5까지 조정하여 굳힌 후 12주동안 상온에서 저장하면서 미생물수를 확인한 결과 pH 11.5이상에서는 일반세균, 대장균 및 식중독균이 전혀 검출되지 않음을 확인할 수 있었다. 이러한 결과를 바탕으로 응고시 곤약의 pH와 침지액의 pH를 11.5로 설정할 경우 별도의 살균과정 없이 3개월이상 유통이 가능할 것으로 기대되며, pH의 조절만으로 이를 가능하게 함으로써 공정의 간편 효과도 얻을 수 있을 것으로 사료된다.

• 한국산림과학회지
• /
• 제99권3호
• /
• pp.423-431
• /
• 2010

본 연구는 백합나무의 효율적인 기내번식법 개발을 위하여 temporary immersion 방식의 생물반응기(TIB)를 이용한 체세포배 발아에 미치는 몇 가지 요인을 구명하고자 실시하였다. 사용된 생물반응기는 간헐적으로 배지가 식물체에 접촉되도록 설계되어 배지의 침지시간을 임의로 조절하였다. 본 방식을 통한 백합나무 체세포배 발아율은 배지의 침지시간이 상대적으로 길었던 매 4시간 마다 120분씩 침지시킨 처리구와 매 4시간 마다 60분씩 침지시킨 처리구에서 높게 나타났다(각각 91.64%, 85.67%). 하지만 식물체의 과수화 비율은 침지시간이 상대적으로 짧았던 매 6시간 마다 15분씩 침지시킨 처리구와 상대적으로 길었던 매 4시간 마다 120분씩 침지시킨 처리구에서 높게 나타났다(각각 51.61%, 34.28%). 매 4시간 마다 60분씩 배지를 침지시킨 처리구에서 과수화된 식물체가 가장 적게 나타났으며, abscisic acid (ABA), superoxide dismutase (SOD) 및 catalase의 함량이 가장 적은 것으로 나타났다. 본 실험에서 생물반응기내 배지 침지 시간은 체세포배 발아시 스트레스 요소로서 작용하여 발아 및 식물체 생장의 차이를 보여주었다. 이상의 결과는 TIB방식의 생물반응기를 통해 백합나무의 효율적인 발아가 가능함을 보여주었다.

• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.177-182
• /
• 2000

Composite insulation system of liquid nitrogen and solid spacer is widely applied in high temperature superconduction power machine. This study has three step procedure. As follow, first step is composition of parallel deposited electrode and vertically deposited electrode along the direction of immersion in liquid nitrogen(LN2). Second step is investigation into surface flashover voltage of solid spacer under partially immersed in LN2, and last step is comparison the result of this research with that of fully immersed in LN2 and at cryogenic temperature gaseous nitrogen(GN2). This result presented that surface flashover voltage along solid spacer half immersed in LN2 was almost the same as that of fully immersed spacer when the thickness of spacer(t) was t<10mm. In the case of t> 10mm, however, spacer flashover voltage was equal to that obtained in GN2 at cryogenic temperature. And the immersed direction functions as role of deciding the difference of surface flashover voltage.

• Biomolecules & Therapeutics
• /
• 제10권4호
• /
• pp.281-286
• /
• 2002

In this study, we intended to get a preliminary data for establishing rat tracheal surface epithelial(RTSE) cell culture system as an experimental model for physiology and pharmacology of tracheal epithelial cells. Primary culture on the membrane support and application of the air-liquid interface system at the level of cell layer were performed. The cell growth rate and mucin production rate were measured according to the days in culture. The results were as follows: this culture system was found to manifest mucocilliary differentiation of rat tracheal epithelial cells, the cells were confluent and the quantity of produced and released mucin was highest on culture day 9, the mucin was mainly released to the apical side and tbe free $^3{H}$-glucosamine which was not incorporated to process of synthesis of mucin was left on the basolateral side. Taken together, we suggest that air-liquid interface culture system can be used as a substitute for immersion culture system and as an experimental model for in vivo mucus-hypersecretory diseases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.732-737
• /
• 2000

The purpose of this study is to compare the SMD(Sauter mean diameter) with different vibrant plates. Each vibrant plates have different surface roughness. Also liquid film thickness are measured for explanation how to concern atomization. Ultrasonic waves is used for vibration. Immersion liquid method is used for the measure of SMD and also liquid film thickness is measured using of point needle method. Distilled water and gasoline fuel are used to liquids. Supplied liquid flow rates are $18{\sim}296cc/min$. Centerline average roughness of vibrant plates are 0.5, 2.0, 4.7, $9.5\;{\mu}m$ and diameter of vibrant plate is 60mm. In result, good atomization of liquid is obtained in widen flow rates. The mean droplet size is increased in orders of 4.7, 2.0. 9.5, $0.5\;{\mu}m$ surface roughness. Distilled water has a big mean droplet size than gasoline fuel in low flow rate. Above the 78cc/min flow rates, distilled water has a small mean droplet size than gasoline fuel. Liquid films changes are measured with ultrasonic power. Also, cavitation effect on sprays is observed.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.91.1-91
• /
• 2003

Bakanae disease, caused by Gibberella fujikuroi (anamorph Fusarium moniliforme J. Sheldon), a typical seed-borne disease of rice occurs from nursery to paddy fields. Consequently, chemical seed disinfectants is the most efficient control method. Several seed treatment methods with various fungicides were attempted to inhibit disease. Spray and 24 hrs immersion of seeds using prochloraz emulsion reduced disease infection and the control value were 99.3 and 100％, respectively. In contrast, dressing to wet seeds thiophanate-methyl＋thiram wp and benomyl＋thiram wp reduced disease infection more effectively than 24 hrs immersion of seeds. However, dressing of carpropamid+imidacloprid＋fludioxonil wp to wet seeds did not reduced disease as well as wettable liquid of fludioxonil. The results suggest that the bakanae disease might be disinfected effectively by 24 hrs immersion of seeds in prochloraz emulsion and seed dressing of fungicides.

• Membrane and Water Treatment
• /
• 제3권4호
• /
• pp.231-242
• /
• 2012

The performance of a nanofiltration membrane for treatment of a low-level radioactive liquid waste was investigated through static and dynamic tests. The liquid waste ("carbonated water") was obtained during conversion of $UF_6$ to $UO_2$. In the static tests membrane samples were immersed in the waste for 24, 48 or 72 h. The transport properties of the samples (hydraulic permeability, permeate flow, selectivity) were evaluated before and after immersion in the waste. In the dynamic tests the waste was permeated in a permeation flow front system under 0.5 MPa, to determine the selectivity of NF membranes to uranium. The surface layer of the membrane was characterized by zeta potential, field emission microscopy, atomic force spectroscopy and infrared spectroscopy. The static test showed that the pore size distribution of the selective layer was altered, but the membrane surface charge was not significantly changed. 99% of uranium was rejected after the dynamic tests.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.846-851
• /
• 2010

광섬유형 결합기의 끝단면을 이용한 액체-공기 경계면 감지 센서를 제안하고 특성을 시험하였다. 이 센서 시스템의 원리는 광섬유 끝단의 경계면에 접촉하는 물질의 굴절률 변화에 따라 발생하는 추가적인 광 손실을 이용하는 것이다. 각각 다른 광 분배비를 가지는 다섯 가지의 광섬유형 결합기를 이용하여 물과 공기에 접촉하였을 때의 스펙트럼 응답 특성을 측정하고 분석하였다. 이 실험결과는 다중 센서헤드를 가지는 센서 시스템을 개발할 경우 결합기의 광 분배비를 결정하는데 유용하게 사용되어질 것이다. 제안된 센서 구조를 이용하여 다중센서 배열을 위한 결합기 선택에 활용될 수 있기를 기대한다. 또한 다중지역에서 동시에 발생하는 홍수나 침수을 감시하는 모니터링 시스템에 적용될 수 있다.