• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.127-135
• /
• 2002

The relationship between the seismic velocity and RQD was estimated using the RQD data obtained from the optical borehole image processing and drill core logs and the seismic velocity measured from the PS logging. The seismic velocity and crack aperture show a high correlation in the granite in Yuseong area and banded gneiss in Paldang area. However, such a relationship cannot be found in the sedimentary rock in Sabuk area. In the sedimentary rock of Sabbuk area, the seismic velocity shows widespread distribution especially in the 0∼20mm range of accumulated crack aperture probably because the wide distribution of fracture zone in coaly shale results in the inaccurate measurements of the crack aperture.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.56-61
• /
• 2004

In order to image the distribution of permeability in granitic rocks, we carried out two-dimensional (2D) resistivity profiling, together with in-situ permeability tests, electrical logging of boreholes, and resistivity measurements of rock core samples in a laboratory. Based on the electrical logging and in-situ permeability data from boreholes, we obtained empirical equations which relate resistivity and permeability of the granitic rocks in the area studied. We then applied the empirical equation to a 2D resistivity section, to produce a 2D permeability section of the granitic rocks. In this paper, we present details of the field data and of the procedure for conversion from the resistivity section to a permeability section. The observed relationship between resistivity and permeability of the rocks is also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11B
• /
• pp.1928-1938
• /
• 2000

기존 데이터베이스 시스템에서 사용되는 회복 기법들은 시스템 파손 시 빠른 회복을 지원하기 위해서 물리적 로깅(physical logging)을 사용한다. 그러나 이런 기법들을 클라이언트/서버 환경에 그대로 적용할 경우에는 여러 가지 문제점이 발생된다. 물리적 기법의 경우에는 로그 분석 시 before-image와 after-image의 중복이 발견된다는 문제점이 있으며, 기존의 대부분 회복 기법들은 시스템 파손 시 전방향(forward)으로 로그를 분석함으로써 불필요한 회복 동작이 존재할 수 있다. 또한 시스템 회복 시 로그 접근 횟수의 증가로 인해 회복 속도가 늦어지는 문제점이 있다. 이 논문에서는 이런 문제점을 해결하고 클라이언트/서버 환경에 적합한 회복 기법을 제안하기 위해 중복된 before-image를 제거하고 재수행 전용 로그 레코드(redo-only log record)만을 로그에 기록함으로써 로깅 오버헤드를 감소시키면서 로그 분석 시간을 감소시킨 역방향 로그 분석 기법을 제안하였다. 또한 로그 분석 시 유지해야 하는 자료구조의 오버헤드를 최소화했다. 마지막으로 제안된 기법과 기존의 기법을 비교 분석하였다.

• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.41-48
• /
• 1993

In order to provide design concept and guidelines for the user interface of MIDAS$^{TM}$(Medical Image Display and Archiving System), a questionnire survey and empirical study were conducted. User and task requirements were analyzed based upon usrvey results. The empirical study was done on the 1.0 version of MIDAS to find out the influence of user charactenistics (i.e.job, experiences, etc.) and UI design factors(i.e. layout, wording, procedures) on various usability measures(i.e. performance, satisfaction). To perform empinical tests, eight task scenarios were selected and user interactions were recorderded using an auto-logging software. The results show that the doctor group requires more learning time. Also, eight types of user errors such as commision, omission, repeat were identified and the causes of the errors were analyzed related to UI design factors. UI design guidelines were suggested for a new version of medical image filing system.m.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.563-569
• /
• 1994

Resistivity Image Profiling has been applied to a geological survey in the Keoje-do area. Survey lines are located near the KD-02 and KD-06 wells in the area, where we have already sampled all rock cores and carried out several kinds of geophysical logs. In each site a resistivity cross-section is obtained by inverting pole-pole apparent resistivities. Comparing the reconstructed resistivity section with the rock cores and logging data obtained in the well provides a detailed picture of subsurface geology. The geology of KD-02 site is composed of conglomerate, sandstone and shale with fractures. The reconstructed resistivity image is useful for assessing the grade of weathering of these rocks. The KD-06 site is mainly underlain by granitic rocks, and its fresh basement can be delineated by resistivities over $1000{\Omega}{\cdot}m$.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.410-415
• /
• 2003

Ground subsidence has occurred in the downtown of Muan-eup in Korea. Integrated geophysical survey, including two-dimensional resistivity, CSMT(Controlled source magnetotelluric), magnetic, borehole logging, GPR and resistivity tomography, has been conducted to investigate the cause of subsidence and ground conditions. Since the target area is in the city downtown, there were no spaces for surface geophysical methods. To get regional geology and to facilitate the detailed geophysical interpretation in the survey area, two-dimensional resistivity, CSMT and magnetic surveys have been applied in the outer region of the downtown. From these results, we could accurately define the Gwangju fault system and estimate the geologic conditions in the downtown. For the detailed survey of the downtown area, resistivity tomography and borehole logging data have been acquired using a few tens of densely located boreholes. Among these survey results, borehole logging data provided the guide to classification of the rock type and we could define the geologic boundary of granite and limestone formations. From the resistivity tomograms of 42 sections, which are densely located enough to be interpreted in a three-dimensional manner, we could delineate the possible weak zones or cavities in the limestone formations. In particular, resistivity tomograms in the subsided area showed the real image of ground subsidence. The map of hazardous zone has been derived from the joint interpretation of these survey results and we could provide the possible reinforcement strategy in this area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.81-87
• /
• 2009

This study aims to evaluate how efficiently time-worn building could be managed by using GPS-based video-logging systems. The digitally georeferencing video data taken by a hand-hold GPS-based video-logging system allows quick retrieval and effective management for the complicate and various superannuated building in urban area. The results of the study are as follows. Georeferencing data are possible to trace observed positions by using GPS linked with video and to provide building crack information anytime that could be used to inspect and analyze the safety hazard diagnosis of buildings. Building crack information were measured by the proposed method that is merged with feature tracking and image mosaic of sequenced images. From the study, it reveals that the georeferencing video technique provides more realistic and reliable information in safety diagnosis and it can also be used as the essential and modern tool in urban building management.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.693-696
• /
• 2005

KIGAM (Korea Institute of Geoscience and Mineral Resources) launched a new project to develop the low-temperature geothermal water in the area showing high geothermal anomaly, north of Pohang city, for large-scale space heating. Surface geologic and geophysical surveys including Landsat 1M image analysis, gravity, magnetic, Magnetotelluric (MT) and controlled-source audio-frequency MT (CSAMT), and self-potential (SP) methods have been conducted and the possible fracture zone was found that would serve as deeply connected geothermal water conduit. In 2004, two test wells of 1.1km and 1.5km depths have been drilled and various kinds of borehole survey including geophysical logging, pumping test, SP monitoring, core logging and sample analysis have followed. Temperature of geothermal water at the bottom of 1.5km borehole reached over $70^{\circ}C$ and the pumping test showed that the reservoir contained huge amount of geothermal water. Drilling for the production well of 2 km depth is on going. After test utilization and the feasibility study, geothermal water developed from the production well is going to be provided to nearby apartments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1189-1204
• /
• 2018

Detecting and capturing 3D human structures from the intensity-based image sequences is an inherently arguable problem, which attracted attention of several researchers especially in real-time activity recognition (Real-AR). These Real-AR systems have been significantly enhanced by using depth intensity sensors that gives maximum information, in spite of the fact that conventional Real-AR systems are using RGB video sensors. This study proposed a depth-based routine-logging Real-AR system to identify the daily human activity routines and to make these surroundings an intelligent living space. Our real-time routine-logging Real-AR system is categorized into two categories. The data collection with the use of a depth camera, feature extraction based on joint information and training/recognition of each activity. In-addition, the recognition mechanism locates, and pinpoints the learned activities and induces routine-logs. The evaluation applied on the depth datasets (self-annotated and MSRAction3D datasets) demonstrated that proposed system can achieve better recognition rates and robust as compare to state-of-the-art methods. Our Real-AR should be feasibly accessible and permanently used in behavior monitoring applications, humanoid-robot systems and e-medical therapy systems.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.43-50
• /
• 2009

This paper caters the need of acquiring the principal objects, characters, and scenes from a video in order to entertain the image based query. The movie frames are divided into frames with 2D representative images called "key frames". Various regions in a key frame are marked as key objects according to their textures and shapes. These key objects serve as a catalogue of regions to be searched and matched from rest of the movie, using viewpoint invariant regions calculation, providing the location, size, and orientation of all the objects occurring in the movie in the form of a set of structures collaborating as video profile. The profile provides information about occurrences of every single key object from every frame of the movie it exists in. This information can further ease streaming of objects over various network-based viewing qualities. Hence, the method provides an effective reduced profiling approach of automatic logging and viewing information through query by example (QBE) procedure, and deals with video streaming issues at the same time.