• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.181-183
• /
• 2009

This paper proposes a programmed ignition method of high frequency electronic ballast for metal halide lamp. The method precisely controls the ignition voltage and prevents possible damage of ballast for abnormal lamp operation or lamp failure, also sures the zero voltage switching. This improved performance for igniting the lamp enables reliable product of high frequency ballast because of high efficiency, fast start and no extra ignitor.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권10호
• /
• pp.530-535
• /
• 2001

Resonant-type electronic ballast for a metal halide discharge(MHD) lamp is proposed and implemented for 400W MHD lamp. HID lamps have good color rendition, long life and good focusing capability but they have flickers by acoustic resonance when driven at high frequency. A new control method is employed to remove acoustic resonance related instability in HID lamp. By using the amplitude modulation, a spread spectrum effect is employed on the ballast. The control loop of resonant inverter is analyzed and a current is designed. The ballast consists of a power factor controller, an half-bridge resonant inverter, a simple ignitor and an integrator with OP-amps. The experimental results show the good performance as PF 0.93, ballast loss 22W at output 400W and the conducted EMI level is below 60dBuV.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.213-216
• /
• 2008

예기치 않은 외적인 자극에 의한 사고를 막기 위하여 에너지 물질을 함유한 전술 유도무기의 위험성을 감소시킬 필요성이 증대되어, 유도무기 둔감화에 대한 연구가 미국과 나토에서 1980년대 후반부터 활발히 시작되었다. 로켓모터의 둔감성능을 향상시키기 위해서는 추진제를 비롯하여 로켓모터의 모든 부품들이 적절한 조합으로 각각의 특성을 살려 둔감성능 향상에 도움이 되도록 설계되어야 하며 각각의 부품이 어떤 역할을 하는지 이해하여야 한다. 고체 추진기관 둔감화에 필요한 중요한 역할을 하는 구성 요소는 추진제, 연소관, 점화기 및 완화장치 등이 있다.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3676-3685
• /
• 1996

Enhancement of the ignitability was necessary to realize the lean burn engine. The characteristics of multiple-spark capacitor discharge igniter(MSCDI) usefulness of which for lean burn was examined in constant volume combustion chamber and evaluated in spark ignition engine. Noise of MSCDI for engine was restricted by adoption of low voltage control system. It was found that the adaptability for high engine speed was remarkable. Lean limit in engine with MSCDI was extended 10% than conventional coil ignition system. Also maximum brake thermal efficiency was almost enhanced 1%.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.75-83
• /
• 2001

This paper presents the evaluation of combustion characteristics of sing-hole plasma jet ignitions in comparison with conventional spark ignition for variable of swirl velocity. Plasma jet plugs are three types according to ejecting directions : center of chamber, positive and negative swirl flow direction. Experiments are carried out for equivalent ratio 1.0 of LPG-air mixture in a constant volume cylindrical vessel. Not only the flame propagation is photographed at intervals, but the pressure variation in the combustion chamber is also recorded throughout the entire combustion process. The results show that the plasma jet ignitions and spark ignition enhance the overall combustion rate by increasing the swirl velocity. The dependence of the combustion rate swirl velocity leade to the conclusion that the placma jet plug, which ejects plasma jet to the cwnter of combustion chamber is the most desirable ignitor than other plugs.

• 산업기술연구
• /
• 제29권A호
• /
• pp.177-182
• /
• 2009

The inductor which is used at low frequency as the main part of magnetic ballast consists of an iron core, a bobbin and coil. The conventional inductor design method is not suitable for the magnetic ballast because it has various variables and is not a unique method for the magnetic ballast. Thus, this paper presents the optimal design method for a lamination type inductor using a magnetic ballast for Metal Halide Lamps. Also, the optimal inductor design method is researched for inductors of dimming ballasts and ignitors that have a gate-triggered structure using a SCR thyristor. By the simulation and experimental results, we showed that the proposed design methods is valid.

• E2M - 전기 전자와 첨단 소재
• /
• 제5권1호
• /
• pp.111-121
• /
• 1992

본 연구는 Pb( $Co_{1}$3/Nb$_{2}$3/) $O_{3}$-PbTi $O_{3}$-PbZr $O_{3}$계 압전세라믹스의 조성에 따른 착화소자특성과 기계적응력 인가시의 압전열화현상에 대하여 조사하였다. 그 결과 상경계 조성에서 소결밀도, $K_{33}$ 및 출력전압이 최고치를 나타내었으며 능방정계조성에서는 조성의 변화에 따른 소결 및 전기적특성의 변화는 정방정계조성에 비하여 작았다. 기계적 응력 인가시의 압전퇴화현상은 분역의 재배열로 설명할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1304-1306
• /
• 1996

A regenerative signal amplifying gate driver of self-excited electronic ballast is presented. It can be used for high pressure sodium (HPS) lamp without auxiliary external ignitor. Since the HPS lamp requires very high ignition voltage at start up, the resonant frequency of the circuit must be increased to obtain high voltage oscillations in spite of relatively small resonant current. The presented gate driver amplifies the current of gate drive transformer and raises the gate-source voltage Quickly to turn on the MOSFET switches. Hence, the resonant frequency can be increased more than 100kHz. The HPS lamp used in the simulation and experiment has the rating of 400W input power at 220V input ac voltage source. The experiments show that the resonant frequency is above 150kHz at start up.

• 한국화재조사학회지
• /
• 제3권1호
• /
• pp.38-42
• /
• 2003

There are many origins of fire which are offered by many path, such as cigarette-butt, light of match, playing with fire, arson, and other, in and around wastebasket. Because of above-mentioned thing and the quality of the plastic, it is very difficult to discriminate the difference of burned pattern between in and around wastebasket, between an accidental fire and arson in oder to investigate the point of fire. In this study, the wastebaskets filled up with 2/3 combustibles, and then, in and around wastebasket using the gas lighter by ignitor, and we observe how the fire spread. As a result, if wastebaskets are burned inside the limit 50%, we discriminate the difference of burned pattern between in and around wastebasket. But, if wastebaskets are burned more thant 50%, it is impossible to discriminate the difference of burned pattern between in and around wastebasket.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.1-8
• /
• 2014

The conventional Three-Stage electronic ballast is stable, but Two-Stage electronic ballast has been researching because of efficiency. Three-Stage electronic ballast is consisted of PFC circuit, buck converter, and inverter circuit, but Two-stage is consisted of PFC circuit, Buck-Inverter full bridge circuit. The Buck-Inverter full bridge inverter consists of two half bridge inverters for low frequency switching, and high frequency switching. In the case of street lamp it is far from a lamp to a ballast, the conventional pulsed high voltage ignitor can not turn on the HID lamps because of reduction of ignition voltage. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps. Therefore, in the Two-Stage electronic ballast which has the resonant tank for ignition, the transient resonant current because of low frequency changing is analyzed, the novel algorithm is proposed to resuce the transient current.