• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1148-1160
• /
• 2001

An electronic control system of the automobile engine for optimal start and idle speed control has been developed. This system employs the microcoputer-based electronic control unit and crank angle sensor for precise control on fuel injection, ignition timing, and idle speed more quickly and accurately at the start and idling. Consequently, the number of misfire can be reduced during been affected by air flow rate, idle quality(roughness), spark timing, fuel injection, water temperature, and load, Thus, this electronic control system strivers to reach the optimal idle operating point, defined the lowest idle speed(fuel economy) and idle quality(roughness), under any engine operating conditions.

• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.763-768
• /
• 2006

Emission reduction in the cold start period of SI engines is crucial to meet stringent emission regulations such as SULEV Emissoin reduction is the starting point of the study in the which the variable valve timing (VVT) technology may be one promising method to minimize cold start emissions while maintaining engine performance. This is because it is possible to change valve overlap and residual gas fraction during cold start and idle operations. Our previous study showed that spark timing is another important factor for reducing cold-start emissions since it affects warm-up time of close-coupled catalysts (CCC) by changing exhaust gas temperature. However, even though these factors may be favorable for reduction of emissions, they may deteriorate combustion stability in these operating conditions. This means that the two variables should be optimized for best exhaust emissions and engine stability. This study investigated the effects of valve and spark timings in idle performance such as combustion stability and exhaust emissions. Experiments showed that valve timings significantly affected engine stability and exhaust emissions, especially CO and $NO_x$, due to change in residual gas fraction within the combustion chamber. Spark timing also affects HC emissions and exhaust gas temperature. Yet it has no significant effects on combustion stability. A control strategy of proper valve timing and spark timing is suggested in order to achieve a reduction in exhaust emissions and a stable operation of the engine in a cold start and idle operation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.1063-1066
• /
• 1996

On the prediction of driving performance, an acceleration performance is normally simulated in stall starting condition which is the engine status of full-throttle and high-speed. The lack of transient engine torque data makes the difficulty of predicting an acceleration performance on engine-idle start condition. A experimental equation of transient engine torque is derived from vehicle performance test data. It is applied to simulation the accleration performance prediction on idle starting condition.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.556-576
• /
• 2023

This study attempted to find a way to utilize idle spaces in rural areas as a way to respond to rural extinction. Based on the keywords "startup," "youth start-up," and "youth start-up+rural," start-up+rural," the study sought to identify the perception of idle facilities in rural areas through the keywords "Idle facilities" and "closed schools." The study presented basic data for policy direction and plan search by reviewing frequency analysis, major keyword analysis, network analysis, emotional analysis, and domestic and foreign cases. As a result of the analysis, first, it was found that idle facilities and school closures are acting importantly as factors for regional regeneration. Second, in the case of youth startups in rural areas, it was found that not only education on agriculture but also problems for residence should be solved together. Third, in the case of young people, it was confirmed that it was necessary to establish digital utilization for agriculture by actively starting a business using digital. Finally, in order to attract young people and revitalize the region through best practices at home and abroad, policy measures that can serve as various platforms such as culture and education as well as startups should be presented in connection with local residents. These results are significant in that they presented implications for youth start-ups in rural areas by reviewing start-up recognition for the influx of young people as one of the alternatives for the use of idle facilities and regional regeneration, and if additional solutions are presented through field surveys, they can be used to set policy goals that fit the reality.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.22-27
• /
• 2015

Hydrogen features highest energy density per mass and is expected to be desirable as a fuel of HALE(High altitude long endurance) UAV(Unmanned aerial vehicle). A reciprocating internal combustion engine is known to be a reliable and economic power source for this kind of UAV. Therefore, the combination of hydrogen and engine is worth of doing research. Test bench with 2.4L Spark-Ignited engine was prepared for the experiment in which start and combustion characteristics at idle condition were examined in this study. Stable hydrogen supply system and a universal ECU(Engine control unit) were also utilized for the test engine. Equivalence ratio and spark timings at idle operation were investigated and compared to the data of gasoline engine. The results will be a starting point for full-scale research of hydrogen engine for HALE UAV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.289-298
• /
• 2007

A nonlinear dynamic simulation model from cranking to idle speed is developed to optimize the cold start process of a diesel engine. Physically-based first order nonlinear differential equations and some algebraic equations describing engine dynamics and starter motor dynamics are used to model the performance of cold starting process which is very complex and involves many components including the cold start aiding method. These equations are solved using numerical schemes to describe the starting process of a diesel engine and to study the effects of cold starting parameters. The validity of this model is examined by a cold start test at $-20^{\circ}C$. Using the developed model the effects of the important starting variables on the cold starting processes were investigated. This model can be served as a tool for designing computer aided control systems that improve cold start performance.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.101-108
• /
• 2011

On cold start operation of an SI engine, a catalyst shows poor performance before it reaches activation temperature. Therefore, fast warmup of the catalyst is very crucial to reduce harmful emissions. In this study, an appropriate control strategy is investigated to increase exhaust gas temperature through changes of spark timing. Combustion stability is also considered at the same time. Exhaust gas temperature and pressure of combustion chamber are measured to investigate the effects of spark timings on cold start and idle performance. Experiments showed that retarded spark timing promotes the combustion at the end of expansion stroke and increases exhaust gas temperature during cold start.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.54-59
• /
• 2011

Reliable starting capability of a gas turbine engine calls the engine industry's attention recently. So far the gas turbine engine performance researches have focused on the range between idle to Max rpm, but recent attention on the starting has brought interests in the range of "Sub-dile". As component characteristic maps are essential for the starting research, various kinds of studies have been doing and proposing ways to expand the existing maps toward sub-idle range. In this paper, previous studies were discussed and a new method suggested and validated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.694-699
• /
• 2010

Reliable starting capability of a gas turbine engine calls the engine industry's attention recently. So far the gas turbine engine performance researches have focused on the range between idle to Max rpm, but recent attention on the starting has brought interests in the range of "Sub-dile". As component characteristic maps are essential for the starting research, various kinds of studies have been doing and proposing ways to expand the existing maps toward sub-idle range. In this paper, previous studies were discussed and a new method suggested and validated.