• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.116-117
• /
• 2006

Increasing the solvent molecular size leads to shrinkage of the polymer chains and increase of the critical overlap concentrations. In addition, the dependency of $R_{g}$ on polymer concentration under normal solvent conditions and solvent molecular size is in good agreement with scaling laws. When the solvent molecular size approaches the ideal end-to-end distance of the polymer chain, an extra aggregation of polymer chains occurs, and the solvent becomes the so-called medium-sized solvent. When the size of solvent molecules is smaller than the medium size, the polymer chains are swollen or partially swollen. However, when the size of solvent molecules is larger than the medium size, the polymer coils shrink and segregate, enwrapped by the large solvent molecules.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.942-949
• /
• 2013

This study was performed to investigate purchasing practice and size satisfaction in order to offer basic data to establish marketing strategy and produce ready-made clothes for the male college students according to their body type. For data analysis, crosstabs, factor analysis and one-way ANOVA were used. Results were as follows; first, this study considered the somatotype distribution of male college students. The results showed that inverted triangle -shaped torso was the ideal somatotype in all the classified four actual somatotypes. Second, people in standard body types significantly considered price and appearance such as design, color, pattern and price while people in triangle-shaped torso placed the most importance in the practicality and wearability. People with inverted triangle-shaped torso was found to significantly consider the perceptual quality such as brand, a/s and fashion. Third, this study considered the wearing satisfaction of ready-to-wear. The respondents placed more emphasis on the practicality and wearability as their actual somatotypes were not ideal for them. Fourth, the examination of the difference in size fitness depending on clothing by somatotype when wearing ready-to-wear showed that breast on the top was small when wearing it in the remaining somatotypes except for standard somatotype. The upper body showed better size fitness in triangle-shaped torso. There is a difference in fitness according to somatotypes classified by the form factors even though they have the same body mass index.

• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.263-272
• /
• 1984

This study was undertaken to examine the extent to which tooth size and jaw size each contribute to dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 94 pairs of dental casts (46 males and 48 females) with normal occlusion. A second group, consisting of 84 pairs of dental casts (98 males and 46 females) with crowding. The results were as follows. 1. Means and standard deviations of the two groups were used to compare the two groups. 2. Significant differences were observed between two groups on the basis of tooth size, arch dimension and arch perimeter. 3. Between noncrowded group and crowded group, was crowded group was found to have large troth size than noncrowded group, while smaller arch dimension and perimeter. 4. Significant differences were observed between males and females on the basis of tooth size, arch dimension and arch perimeter. 5. Author found ideal arch shape of normal occlusion.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.805-813
• /
• 2013

In this study, molecular size distribution of natural organic matter (NOM) after ozonation was measured and its effect on adsorption capacity of activated carbon was investigated. According to the results, the molecular size of NOM was limitedly changed. Specifically, the molecular size of NOM between 5,000 to 10,000 Da were slightly decreased with increasing ozone doses. The adsorption capacity after ozonation was evaluated using Freundlich isotherm with ideal adsorbed solution theory (IAST) which simulated the multi components adsorption. Further, mini-column test was conducted. The Freundlich constant, K was reduced after ozonation and the non-adsorbable fraction was increased with ozonation. However, no correlation between K and ozone doses was found. The present study also agreed with the correlation between adsorption capacity and pore size characteristics of activated carbon.

• Advances in materials Research
• /
• v.8 no.3
• /
• pp.219-235
• /
• 2019

This research is devoted to analyzing mechanical-thermal post-buckling behavior of a micro-size beam reinforced with graphene platelets (GPLs) based on geometric imperfection effects. Graphene platelets have three types of dispersion within the structure including uniform-type, linear-type and nonlinear-type. The micro-size beam is considered to be perfect (ideal) or imperfect. Buckling mode shape of the micro-size beam has been assumed as geometric imperfection. Modified couple stress theory has been used for describing scale-dependent character of the beam having micro dimension. Via an analytical procedure, post-buckling path of the micro-size beam has been derived. It will be demonstrated that nonlinear buckling characteristics of the micro-size beam are dependent on geometric imperfection amplitude, thermal loading, graphene distribution and couple stress effects.

• Journal of The Korean Association For Science Education
• /
• v.4 no.1
• /
• pp.15-25
• /
• 1984

The purpose of this study is to develop a practical and ideal model of science laboratory enrolled 48-60 students by studying optimal facilities such as laboratory tables and chairs proper to elementary school settings. The science laboratory model was figured out in terms of the following six procedures; (1) Current status as well as problems of science laboratory and its facilities was identified by means of the questionnaires conducted to 201 elementary schools, using stratified cluster sampling tehnique, under the consideration of the school size and the regional characteristics across the country. (2) Collected were the anthropometric data with respect to sitting height, popliteal height, buttock popliteal length, elbow rest height, and back width from the 747 students, 4th-6th grade, in Seoul area. (3) It was measured the work apace necessary for individual student to perform his experiment. (4) Using the data of the process (2), we determined the optimal sizes of laboratory tables and chairs fitted for Korean elementary school students. (5) The optimal area of science laboratory for 48-60 students is determined in terms of the data obtained in (3) for individual work space in addition to the appropriate table size figured out by (4). (6) A practical and ideal model for a science laboratory in elementary school was designed according to the above procedures. For the optimal model of science laboratory, the results of this study can be summarized as follows: The sizes of chair and table are categorized into three groups such as small, medium, and large depending on students' physical outfit. The small size base on the 12.5th percentile point of students' sitting height is used for students of the 0-25th percentile ranks. The medium size base on the 50th percentile point of students' sitting height is used for students of the 26-75th percentile ranks. The large size base on the 87.5th percentile point of students' sitting height is used for students of the 76-100th percentile ranks. (1) Sizes of chairs: The small size is 28cm in width and 33cm in height. The medium size is 31cm in width and 36cm in height. The large size is 35cm in width and 38cm in height. (2) Sizes of laboratory tables: The small size is 120cm in length, 86cm in width, and 60cm in height. The large size is 120cm in length, 86cm in width, and 60cm in height. The large size is 120cm in length, 86cm in width, and 65cm in height. (3) Size of science laboratory: The optimal science laboratory for 48-60 elementary school students, which can install the 12 laboratory tables, is 12m in length and 10m in width.

• The Korean Journal of Community Living Science
• /
• v.23 no.3
• /
• pp.221-231
• /
• 2012

To find the differences between the real somatotype and the ideal somatotype, WHR(Waist to Hip Ratio), WCR(Waist to Chest Ratio), and body cathexis were analysed by using ANOVA test, Duncan's multiple range test, and $x^2$ test. Fashion image sought by female collegians was surveyed, too. The results were as follows. WHRs in slim, usual, fat body type were 0.75, 0.76, and 0.83 and WCRs were 0.77, 0.81, 0.80. The respondents who considered themselves to be overweight recognized themselves to be fatter than their real weight. They were not satisfied with their bust girth in slim body type, thighs and calves in usual body type, and all parts except for foot length, hand length and arm length in fat body type. 60% of the thin people considered their body hourglass shape, 30.4% of regular people recognized their body triangle type, 43.8% of fat people thought their body was round form. They thought current ideal body size was bigger in height and bust girth and smaller in waist girth and hip girth, and weight than real body size. Also they responded ideal body shape was an hourglass type independent of somatotype. The pursuit of clothing image was that 45.5% of female collegians were fashionable and raffine and 10.4% of female collegians was elegant and graceful. Among the body area, body parts that may have an effect on body image were body length in 13.1% of the respondents, waist girth in 10.7% of the respondents, and hip girth in 10.0% of the respondents.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1715-1721
• /
• 2002

Numerical analysis was conducted to characterize the gas flow field and particle deposition on a horizontal freestanding semiconductor wafer under the laminar flow field at vacuum environment. In order to calculate the properties of gas, the gas was assumed to obey the ideal gas law. The particle transport mechanisms considered were convection, Brownian diffusion and gravitational settling. The averaged particle deposition velocities and their radial distributions fnr the upper surface of the wafer were calculated from the particle concentration equation in an Eulerian frame of reference for system pressures of 1 mbar~1 atm and particle sizes of 2nm~10$^4$ nm(10 ${\mu}{\textrm}{m}$). It was observed that as the system pressure decreases, the boundary layer of gas flow becomes thicker and the deposition velocities are increased over the whole range of particle size. One thing to be noted here is that the deposition velocities are increased in the diffusion dominant particle size range with decreasing system pressure, whereas the thickness of the boundary layer is larger. This contradiction is attributed to the increase of particle mechanical mobility and the consequent increase of Brownian diffusion with decreasing the system pressure. The present numerical results showed good agreement with the results of the approximate model and the available experimental data.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.448-458
• /
• 1993

The purpose of this study was to study real body size and ideal body shape by consoidering the degree of satisfaction at body part and understanding body size by the degree of leanness/obesity. The subjects in this study were 201 female college students aged from 18 to 26. Boby measurements and survey were taken from May to June, 1991 and 1992. Data were analyzed by correlation analysis, regression analysis, cluster analysis, ANOVA, discriminant analysis and crosstabulation analysis. The results were as follows ; 1. The subjects tended to be satisfied with long and slim limbs, slim trunk, and prefered to be tall in height and light in weight. Also the consciousness about thickness was keener than that about length of the body. 2. The subjects were conscious that lower body was more obese than and upper body. Also, the consciousness of whole body had higher correlation with that of upper body than lower body. 3. The subjects were classified into 4 clusters each consisting 23, 87. 68, 23 by cluster analysis of 21 variables after a transformation of measurements to eliminate body size factor. This classification was considered to express how lean or how obese a human body appears. 4. According to the degree of leanness/obesity from lean tendency group I to obese tendency group IV, characteristics of the body shape were changed as follows ; height lower, limbs shorter, trunk and limbs thicker and weight heavier. 5. The subjects of lean tendency group I were more satisfied with their body than those of obese tendency group IV. 6. The subjects, although they were not judged to be obese by somatometric measurements, felt themselves obese. Also, they hoped to be slimmer at lower body than upper body.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.133-140
• /
• 1998

The purpose of this study was to analyze the differences between the real body size that had measured and self-conceptual body size. For this, measurements and survey were practiced to 85 subjects who were divided by three groups as the degree of fatness. Followings were the findings of this research: 1)Self-conceptual body size items that were related with clothing size spec expressed the same results with the real body size. 2)Self-conceptual body size items that were not offered the practical information for bo요 size such as height, fatness and length of leg were related with the ideal image that was preferred by subjects.