• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.446-448
• /
• 1995

This paper dscribes a detail simulation model with EMTP (Electro-Magnetic Transients Program) which is very effective to analyze the interaction between the ac transmission line and STATCON (static condenser). The SATCON was represented by two voltage-source converters connected in parallel and sharing an energy storage dc capacitor bank. The voltage source converters was modeled with ideal gate turn-off switches. The power system was represented by a detail generator model and a distributed tramnsmission line model for detail performance analyses. Analysis results show that the conceived simulation model is very effective to analyze the interaction between the ac transmission line and STATCON, and to evaluate the performance of STATCON.

• 대한치과교정학회지
• /
• 제28권4호
• /
• pp.563-580
• /
• 1998

치열의 치군 후방이동을 유발하는 교정력에 의해 발생되는 개개 치아의 초기 변위와 응력분포를 평가하고자 본 연구를 시행하였다. 유한요소법을 이용하여 상악 치아와 치근막, 그리고 치조골의 해부학적 형태와 생체적 특성을 컴퓨터로 재현하고 모형화된 브라켓을 부착한 3 차원 유한요소 모델을 형성하였다. 치열의 치군 후방이동에 사용되는 구외력과 II급 악간고무, ideal arch wire와 MEAW(Multiloop Edgewise Arch Wire), 그리고 호선에 부여된 tip back bend 에 의해 야기되는 치아 변위를 비교, 분석하였다 그리고 이러한 치료방법을 상악 제 2 대구치를 발거한 경우와 발거하지 않은 경우에 각각 적용하여 상악 제 2대구치 존재유무에 따른 치아이동 양상의 변화를 분석한 결과 다음과 같은 결론을 얻었다. 1. 전치부 헤드기어에 의해 발생되는 치아변위는 후방 치체변위와 후방 경사변위, 그리고 수직변위 모두 치열 전방부에 집중되어 있었다. 2. Ideal arch wire에 II급 악간고무를 적용한 경우, 치아변위가 치열 전방부에 집중되었으나 ideal arch wire에 tip back bend를 부여하면 악간고무에 의한 견인력이 후방으로 전달되었다. 부여하는 tip back bend의 양이 증가할수록 전치부의 후방 치체변위와 설측 경사변위는 감소하였고 구치부의 후방 치체변위와 경사변위는 증가하였으며 II급 악간고무에 의한 전치부 정출이 감소하였다. 3. MEAW와 II급 악간고무를 적용한 결과, 치아변위 경향은 ideal arch wire와 II급 악간고무를 사용한 경우와 유사하였으나 작은 양의 치아변위와 함께 치열내 개개치아의 비교적 균등한 이동양상을 보였다. 4. 상악 제 2 대구치가 존재하는 유한요소 모델에 상악 제 1 대구치까지만 교정장치를 장착하고 후방이동을 시도한 결과 상악 제 1 대구치 치아이동이 감소하는 경향을 보였다.

• 한국융합학회논문지
• /
• 제7권4호
• /
• pp.181-190
• /
• 2016

The objective of this study is to find the effective stiffness and compressive strengths of a unit-cell pinwheel truss and double pinwheel truss model designed following a double helical geometry similar to that of the DNA (deoxyribonucleic acid) structure in biology. The ideal solution for their derived relative density is correlated with a ratio of the truss thickness and length. To validate the relative stiffness or relative strength, ABAQUS software is used for the computational model analysis on five models having a different size of truss diameter from 1mm to 5mm. Applied material properties are stainless steel type 304. The boundary conditions applied were fixed bottom and 5 mm downward displacement. It was assumed that the width, length, and height are all equal. Consequently, it is found that the truss model has a lower effective stiffness and a lower effective yielding strength.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.370-373
• /
• 1991

This paper considers the linear multivariable model following servo system synthesis method in which linear optimal regulator problem is used to design controllers that make the response of the plant should be kept close to a specified ideal response of the model. The characteristics of this system is that the constructed system is robust in the presence of the constant disturbances or the parameter perturbations of the plant. Especially, the steady state offset is excluded for the ramp response of the model by direct feedforward compensator from the reference input.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.375-378
• /
• 2003

In the present study, a new approach to predict the strength of sintered materials has been carried out and a new framework combining neck growth model and ideal pore model has been established based on the results of tensile tests on powder injection molded specimens with the various porosity. Powder injection molding (PIM) uses the shaping advantage of injection molding but is applicable to metals and ceramics. PIM delivers structural materials in a shaping technology previously restricted to polymers. 17-4 PH stainless steel powders with average diameters of 10 $\mu\textrm{m}$ were injection-molded into flat tensile specimens sintered at the various temperatures ranging from 900 to 1350$^{\circ}C$ for 1h. The relationships between strength and porosity were applied to the experimental results and verified.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.585-590
• /
• 1999

There is still a lack of knowledge and modelling relating to shear behaviour in reinforced concrete beams. The reason is that shear loading leads to complicated physical mecanisms, such as interlock action, dowel action, etc. Therefore, It is difficult that we make the ideal model of shear behaviour, while Truss model theory has been made good use of shear design because of simplicity and reasonableness. In this study, 6 T-type reinforced concrete beams were designed and made based on the two truss models, i.e, the plasticity truss model and the compatibility truss model, to observe shear strength of concrete and stress distribution of stirrups. 6 beams test pieces were tested with the following testing parameters. 1) specified concrete strength ; 270kg/$\textrm{cm}^2$, 400kg/$\textrm{cm}^2$ 2) with and without the steel fiber.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3069-3085
• /
• 1996

This paper shows an accurate charge-pump PLL model which considers the wave-form distortion in high speed operation of charge-pump PLL, the leakage current in loop filter, and a physical limit in charge-pump. With proposed model of charge-pump PLL, overload and stability are derived theoretically and the results are compared to the conventional model. Unlike the ideal charge-pump PLL that simplifies calculations, it is possible to analyze the transient-state and the steady-state at the same time with proposed accurate model. Thus, charge-pump over load, in the transient-state and the stead-state of charge-pump, is accuragely analyzed and the results are confirmed with simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1024-1027
• /
• 1992

This paper deals with design method of the model following servo system in which optimal regulator probelm is used to design the controllers that make the step/ramp response of the plant be keptclose to a specified ideal step/ramp response of the model. The characteristics of this system is robust in the presence of the specified disturbances or the partameter perturbations of the plant. Especially, by direct feedforward compensator from the reference input the steady state offset of plant output response is excluded and the transient response is improved. Examples are give and the results of the design of the model follwing servo systems are verified by the computer simulation.

• 연구논문집
• /
• 통권26호
• /
• pp.15-24
• /
• 1996

In this study, we performed the static analysis of a cord-reinforced rubber airspring and generated the three-dimensional half-symmetry model which use the finite-strain shell elements to model the airbag. the three-dimensional hydrostatic fluid elements to model the air-filled cavity, and the rebar elements to model the multi-ply nylon reinforcement of airbag. In addition, a three-dimensional rigid surface is used to define the contact between the airspring and metal bead. The air inside the airspring cavity has been modeled as a compressible fluid satisfying the ideal gas law. The conclusions of this study are as follows. 1) In the pressurization step of analysis, we could predict the change of vertical reaction force, cavity volume and pressure within the airspring. 2) In the second step of analyzing vertical static stiffness, the increase of the vertical load increases the vertical stiffness. 3) In case of changing the angle of nylon cord, the increase the angle of nylon cord increases the vertical stiffness.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1996년도 제11회 수중음향학 학술발표회 논문집 11th Underwater Acoustics Symposium Proceedings
• /
• pp.64-68
• /
• 1996

수중음파전달 모델은 benchmark 시험을 통해 정확도, 적용범위, 계산시간 등의 성능을 평가받는다. 본 논문에서는 analytic 모델, 정상 모드 모델(normal mode model), 포물선 방정식 모델(parabolic equation model), 가우시안 빔 모델(Gaussian beam model), 스펙트럼 모델(spectral model) 등 거리의존 모델에 대해 benchmark 시험을 수행하였으며, benchmark 시험은 다음과 같은 세 가지 거리의존 해양환경으로 나누어 실시했다 : 1) 해수면과 해저면이 Dirichlet 경계조건인 이상 쐐기 문제(ideal wedge problem), 2) 해수면은 앞서 말한 Dirichlet 경계조건이나 해저면은 전달 손실이 있는 손실 통과 해저면 쐐기 문제(penetrable lossy bottom wedge problem), 3) 해수면은 앞서 말한 Dirichlet 경계조건이고 해저면은 Neumann 경계조건으로 서로 평행이면 음파전달 속도가 거리방향 의존인 경우, 경우 1은 anaytic 모델을 사용하고 경우 2는 정상 모드 모델, 포물선 방정식 모델, 스펙트럼 모델을 사용하였으며, 경우 3에 대해서는 가우시안 빔 모델과 포물선 방정식 모델을 사용하였다.