• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1737-1746
• /
• 1991

본 연구에서는 저온의 순수물 속의 등온 수직원기둥에 의해 야기되는 열전달 특성을 구명함에 있어서 짧은 원기둥 범주에 속하는 종횡비 0.5인 얼음 원기둥을 이용 하여 실험적으로 열전달 특성을 구명하였다. 그리고 전 유동장을 가시화 하였으며, 얼음의 융해율로써 누셀트(Nusselt)수를 측정하여 기존의 결과들과 비교검토하였다.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.113-123
• /
• 2005

In this study, calcium chloride$(CaCl_2)$, sodium chloride (NaCl), organic acids-containing deicer(NS 40, NS 100), mixed deicier$(NaCl\;70%+CaCl_2\;30%,\;NS\;40\;70%+CaCl_2\;30%,\;NaCl\;70%+NS\;40\;30%,\;NS\;40\;70%+NaCl\;30%)$ is investigated based on the laboratory test for deicing performance, freez-thaw resistance of concrete, and corrosion rate of metal. Test items for deicing performance were ice melting and ice penetration, freezing point depressions and eutectic point, pH, thermal properties for selected deicing chemicals as well as their compatibility with concrete and metal were experimentally investigated. As a test results, in case of the use chloride-containing deicier in area that concrete structures has subjected to freez-thaw reaction in winter season, it showed that mixed deicing chemicals with optimum ratio has desirable method than use one deicing chemicals when is consider to deicing performance and effects, corrosion of steel materials, and freez-thaw resistance of concrete. When use various deicing chemicals mixed, NS40(70%)+calcium chloride(30%) showed the best effective method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.137-138
• /
• 2010

It is prospected that commercialization of the Arctic route come to faster than an anticipation due to acceleration of the melting of Arctic ice as a result of global warmness and etc. Since 1979 from the start of the satellite observation, the ice areas of the Arctic ocean came to decrease about 40 % in summer season For the commercial use of the Arctic route, it must be settled some problems including the navigation for the vessels in the EEZ of the related nations before considering about economic basis. It is also needed to build special ships which satisfy to the condition of the Arctic climate for the technical factors of ship handling and should be carried out completion of the special educational program to be approved for the seamen through the cooperation with the coastal nations. The information system for the Arctic route should be developed.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1273-1282
• /
• 2018

Recently, active research on the Arctic Ocean has been conducted due to the influence of global warming and new Arctic ship route. Although previous studies already calculated quantitative extent of sea ice using passive microwave radiometers, melting at the edge of sea ice and surface roughness were hardly considered due to low spatial resolution. Since Sentienl-1A/B data in Extended Wide (EW) mode are being distributed as free of charge and bulk data for Arctic sea can be generated during a short period, the entire Arctic sea ice data can be covered in high spatial resolution by mosaicking bulk data. However, Sentinel-1A/B data in EW mode, especially in HV polarization, needs significant radiometric correction for further classification. Thus, in this study, we developed algorithms that can correct thermal noise and scalloping effects, and confirmed that Arctic sea ice and open-water were well classified using the corrected dual-polarization SAR data.

• Solar Energy
• /
• v.16 no.2
• /
• pp.113-122
• /
• 1996

This study presents experimental results of heat transfer characteristics of P.C.M. during outward melting process in a vertical cylinder. The experiment was carried out in six conditions, i. e., three different inlet temperature($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$) and two directions of working fluid(upward and downward). Melting P.C.M. produced a bell-shaped phase change interface. When the inlet temperature was $7^{\circ}C$, the lower region remained at $4^{\circ}C$ until the temperature of upper region reached $4^{\circ}C$. This was due to the state of maximum density of the lower region. When the direction of the working fluid in the case of $7^{\circ}C$, inlet temperature, was upward, the rate of melting and the total melting energy were higher than when it's direction was downward. But the rate of melting and the total melting energy appeared higher value as it's direction was downward when the inlet temperature is $4^{\circ}C$ and $1^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.256-265
• /
• 1971

An ESR study has been made on free radicals produced in frozen aqueous solutions (ices) of glycine, DL-${\alpha}$-alanine, DL-serine, L-cysteine, DL-leucine and DL-isoleucine by gamma-irradiation at dry ice temperature. All free radicals induced were decayed concomitant to the successive annealing but the radical species which is believed to be dominant seems to be stable even near the melting point of the ice. These dominant species were found to be identical to those resulted from direct action of radiation in the solid at room temperature. Small but significant changes in the spectra of glycine and DL-${\alpha}$-alanine were observed by varying the microwave power. These results seem to support the view that the spectra obtained were composite consisting of more than two different resonances having different power saturation characteristics. The relative contribution of unidentified resonances to the composite spectra was greater for solutions of low concentration. These resonances are assumed to be induced by indirect effects, mainly hydrogen abstraction by radiation produced hydroxyl radicals and also C-N bond cleavage by hydrated electrons.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.1031-1041
• /
• 2016

Interests in the Polar Regions have been growing due to various factors such as depletion of natural resources and advanced resource development technologies, accelerated rate of polar ice melting as a result of global warming, etc. In particular, demand for the workforce related to vessel passage using the Northern Sea Route and polar studies is still expanding. The International Maritime Organization adopted the Polar Code in 2015 for the safety of ship operation in polar waters and it will enter into force from 2017. But education and training section in the code has been prescribed only for the safe navigation in the ice covered waters intended for navigational offices. There is no basic safety training requirement that applies commonly for all personnel exposed to the risk of the polar regions and the relevant study or discussion has not been made so far. Therefore, this study provides basic data for developing safety training courses for crew and other personnel by analyzing relevant regulations on polar safety training and the contents of relevant safety training in offshore industry required by the costal states adjacent to arctic ocean.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.149-158
• /
• 2008

This study was estimated on performance of deicers, corrosion inhibitors and low corrodible deicer used for removal of snow or ice on the road and on influence on structure. The weight loss rate after freezing and thawing of low corrodible deicer is lower than one of deicer, corrosion inhibitors and these combination. Relative dynamic elastic modulus of all except water, low corrodible deicer and NaCl+JF-1004 was radically reduced after freezing and thawing 150 cycles. And concretes after freezing and thawing were showed severe surface damage. It was found that individual use of low corrodible deicer and corrosion inhibitors had a problem of field application because of lack of early ice melting effect and considerably low durability. Products combined with NaCl was showed rapid weight loss by metal corrosion. Therefore, It will need to circumspectly select combination of deicers having low effect on concrete pavement and bridge if possible.

• YAKHAK HOEJI
• /
• v.1 no.1
• /
• pp.1-2
• /
• 1948

The finely powdered entire harbs of Polygala japonica Houttuyn, a drug known as Yong Shin-Cho in Korea, were boiled with methanol and from the filtered extract the methanol was distilled off under diminished pressure and the aqueous solution of the residue was evaporated to dryness after being mixed with ignited magnesia. The dried mass was boiled with absolute alcohol, the filtered clear liquid was evaporated to a small volume and the precipitate Saponin produced by mixing with ether was filtered off. When the filtrate was again evaporated to the thickness of a syrup and allowed to cool for a few days in an ice box, crystalls were separated out in about 5% yield, which formed colorless columns, M. P. 142.deg., from methanol and had the formula $C_{6}$ $H_{12}$ $O_{5}$. On heating it with acetic acid anhybride and sodium acetate, its tetraacetyl derivative $C_{6}$ $H_{8}$ $O_{5}$(C $H_{3}$CO)$_{4}$ was obtained and which formed colorless needles, M. P. 62-5.deg., from ethanol. Their melting points, results of elementar analysis and other characteristics agreed with that of Polygalitol and its derivative. Finally they were proved to be identical with Polygalitol and its derivative, respectively, through determination of mixed melting points with the samples. Polygalitol was isolated from several plants of genus polugala e. g. P. amara, P. vulgaris, P. teunifolia, P. senega etc. The authors added to them another instance of identifying Polygalitol from the plant of genus polygala.olygala.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.5-11
• /
• 2017

The 19 mm-sized aggregate was produced by melting vinyl waste (waste polyethylene film) generated from vinyl greenhouses in rural areas. It was mixed with As'cone at various weight ratios, and then insulation effect test, tension test after repeated freezing and thawing, ice pull-out strength test and field density test were conducted for the mixtures. These results demonstrated that as the mixing ratio of polyethylene aggregate increased, the insulation effect increased, due to the many pore spaces that existed in the polyethylene aggregate. After repeatedly freezing and thawing As'cone, the tensile strength significantly increased at 2.5% of the polyethylene aggregate content rather than 0% of polyethylene aggregate content but it also slightly decreased at 5% and 10% of polyethylene aggregate content in comparison to 2.5% of its polyethylene aggregate content. As'cone added with polyethylene aggregate by 2.5% resulted in lower ice pull-out strength than that of normal As'cone. As a result of the porosity test for the samples taken at the site, porosity of the As'cone, which added polyethylene aggregate, was smaller than that of the general As'cone.