• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.310-312
• /
• 2005

An out-of-step condition results from the loss of the synchronism of the generators. A disturbance in a power system causes the generator angle to oscillate. When there is a severe disturbance such as a heavy current fault loss of major generation or loss of a large block of load the oscillation can be severe and even increase largely and finally the out-of-step condition may occur During the power swing and out-of-step conditions, the a apparent impedance at a relay location changes, and the power flow also changes as the angle difference is varied. This paper presents a method to analyze the trajectory of complex power during a power swing and out-of-step condition. The trajectory of the complex power is analyzed when a power swings and a fault occurs. Moreover, the complex power is analyzed when the ratios between the voltages at both sides and the line impedances are changed. These methods are verified through simulation using the ATP/EMTP MODELS.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.387-392
• /
• 2018

Static characteristics of SiC (silicon carbide) lateral p-i-n diodes implemented on semi-insulating substrate without an epitaxial layer are inVestigated. On-axis SiC HPSI (high purity semi-insulating) and VDSI (Vanadium doped semi-insulating) substrates are used to fabricate the lateral p-i-n diode. The space between anode and cathode ($L_{AC}$) is Varied from 5 to $20{\mu}m$ to inVestigate the effect of intrinsic-region length on static characteristics. Maximum breakdown Voltages of HPSI and VDSI are 1117 and 841 V at $L_{AC}=20{\mu}m$, respectiVely. Due to the doped Vanadium ions in VDSI substrate, diffusion length of carriers in the VDSI substrate is less than that of the HPSI substrate. A forward Voltage drop of the diode implemented on VDSI substrate is 12 V at the forward current of $1{\mu}A$, which is higher than 2.5 V of the diode implemented on HPSI substrate.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.322-330
• /
• 2007

Recent advances in wireless networks and low-cost, low-power design have led to active research in large-scale networks of small, wireless, low power sensors and actuators, In large-scale networks, lots of timing-synchronization protocols already exist (such as NTP, GPS), In ad-hoc networks, especially wireless sensor networks, it is hard to synchronize all nodes in networks because it has no infrastructure. In addition, sensor nodes have low-power CPU (it cannot perform the complex computation), low batteries, and even they have to have active and inactive section by periods. Therefore, new approach to time synchronization is needed for wireless sensor networks, In this paper, I propose Energy-Efficient Time Synchronization (EETS) protocol providing network-wide time synchronization in wireless sensor networks, The algorithm is organized two phase, In first phase, I make a hierarchical tree with sensor nodes by broadcasting "Level Discovery" packet. In second phase, I synchronize them by exchanging time stamp packets, And I also consider send time, access time and propagation time. I have shown the performance of EETS comparing Timing-sync Protocol for Sensor Networks (TPSN) and Reference Broadcast Synchronization (RBS) about energy efficiency and time synchronization accuracy using NESLsim.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.51-56
• /
• 2014

PV cell modeling is necessary both for software and hardware simulators in analyzing and testing the performance of PV generation systems. Unique I-V curve of a PV cell identifies its own characteristics by electrical equivalent model that is composed of diode constants ($I_o$, $v_t$), photo-generated current ($I_{ph}$), series resistance ($R_s$), and shunt resistance ($R_{sh}$). Photo-generated current can be easily estimated since it is proportional to irradiation level. However, other electrical parameters should be solved from the manufacturer's data sheet that is consisted with three remarkable operating points such as open circuit voltage ($V_{oc}$), short circuit current ($I_{sc}$), and maximum power voltage/current ($V_{MPP}/I_{MPP}$). This paper explains and analyzes mathematical process of a novel PV cell modeling algorithm that was proposed by the authors with the name of "K-algorithm".

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.3134-3155
• /
• 2020

In this paper, we study the joint radio and computational resource allocation in the ultra-dense mobile-edge computing networks. In which, the scenario which including both computation offloading and communication service is discussed. That is, some mobile users ask for computation offloading, while the others ask for communication with the minimum communication rate requirements. We formulate the problem as a joint channel assignment, power control and computational resource allocation to minimize the offloading cost of computing offloading, with the precondition that the transmission rate of communication nodes are satisfied. Since the formulated problem is a mixed-integer nonlinear programming (MINLP), which is NP-hard. By leveraging the particular mathematical structure of the problem, i.e., the computational resource allocation variable is independent with other variables in the objective function and constraints, and then the original problem is decomposed into a computational resource allocation subproblem and a joint channel assignment and power allocation subproblem. Since the former is a convex programming, the KKT (Karush-Kuhn-Tucker) conditions can be used to find the closed optimal solution. For the latter, which is still NP-hard, is further decomposed into two subproblems, i.e., the power allocation and the channel assignment, to optimize alternatively. Finally, two heuristic algorithms are proposed, i.e., the Co-channel Equal Power allocation algorithm (CEP) and the Enhanced CEP (ECEP) algorithm to obtain the suboptimal solutions. Numerical results are presented at last to verify the performance of the proposed algorithms.

• 한국인터넷방송통신학회논문지
• /
• 제15권6호
• /
• pp.231-238
• /
• 2015

본 연구는 RF 마그네트론 스퍼터링을 이용하여 ITO glass 위에 N-Type과 P-Type 박막을 증착하여 증착조건에 따른 면저항 특성을 확인하였다. N-Type의 I-V특성은 RF Power가 150 W 일 때 전류의 값이 가장 높은 것으로 나타났고, 15분을 증착하였을 때 기울기가 일정하게 나타나면서 Ohmic contact이 잘 이루어지는 것을 확인 할 수 있었다. 기판온도와 RF Power 및 증착시간이 증가함에 따라 면저항이 증가하는 것으로 나타났고, 면저항이 작은 값일수록 I-V 특성이 잘 나타났다. P-Type 에서도 N-Type과 비슷한 양상을 보이는데, RF Power가 150 W일때 전류가 가장 높은 것으로 나타났고, 20분을 증착하였을 때 Ohmic contact이 잘 이루어지는 것을 확인 할 수 있었다. 면 저항 또한 N-Type과 비슷하게 RF Power와 증착시간이 증가함에 따라 면저항이 증가하는 것을 확인 할 수 있었다.

• 대한전자공학회논문지TC
• /
• 제44권6호
• /
• pp.31-39
• /
• 2007

본 논문에서는 코드분할다중접속방식을 사용하는 이동통신 시스템에서 기지국의 순방향 송신전력 및 파일롯 전력 등 RF 파라미터를 실시가 또는 주기적으로 측정하여 분석함으로써 시스템의 장애를 미연에 방지하고 셀커버리지 확대, 가입자 수용용량 증가 등 최적의 서비스 품질을 확보하고 투자효율을 극대화하기 위한 방안을 제시하였다. 순방향 전력 측정에서는 디텍터 내의 국부발진기 주파수를 가변함으로써 모든 채널의 송신출력을 측정할 수 있도록 하였다. 채널전력의 측정에 의하여 통화량 증가에 따른 송신출력의 변화를 관찰할 수 있으며, 순방향 $E_c/I_o$ 와의 비교를 통하여 파일롯 채널의 전력을 유추함으로써 대전력증폭기 등 송신부 모듈의 열화를 판독할 수 있도록 하였다. 일련의 모든 측정에는 CDMA 레벨디텍터에 의한 정밀 계측에 이은 정확한 분석이 이루어져야 하므로 변조방식 차이에서 오는 Crest factor 가 상이함으로 인한 측정상의 오차를 극복할 수 있도록 설계하였다.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.213-217
• /
• 1997

200MHz 응향광변조기 (AOM: Acousto-Optic Modulator)는 제 2고조파(SHG: Second Harmonic Generation)녹색 레이저와 함께 DVDR(Digital Video Disk Recorder)에 적용되어 고밀도 광기록용으로 사용되었다. 이러한 고밀도 광기록 장치로써 사용되기 위해서는 고출력 레이저의 사용이 필수적이며, 레이저 빔이 통과하는 각 광학 소자들의 코팅막은 고출력 레이저 빔에 대해 높은 레이저 damage threshold를 가져야 한다. AOM의 음향공학재료로 사용되는 $TeO_{2}$단결정에 코팅막의 종류 및 증착조건을 변화시키며 E-beam 증착법으로 A/R코팅 시편을 준비하였다. 0.55W의 입력 power를 갖는Ar레이저를 사용하여 코팅의 광손상 정도를 확인하였다. $AI_{2}O_{3}$막에 비해 $ZrO_{2}$와 $SiO_{2}$막을 사용한 경우 레이저 damage threshold는 크게 향상되었다. 또한 AOM모듈을 제작 후 구동회로와 연결하여 약 20mW의 SHG power를 입력시키며 출력 power long term안정성을 측정하였다.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.129-141
• /
• 2005

A high-performance robust hybrid speed controller for a permanent-magnet synchronous motor (PMSM) drive with an on-line trained neural-network model-following controller (NNMFC) is proposed. The robust hybrid controller is a two-degrees-of-freedom (2DOF) integral plus proportional & rate feedback (I-PD) with neural-network model-following (NNMF) speed controller (2DOF I-PD NNMFC). The robust controller combines the merits of the 2DOF I-PD controller and the NNMF controller to regulate the speed of a PMSM drive. First, a systematic mathematical procedure is derived to calculate the parameters of the synchronous d-q axes PI current controllers and the 2DOF I-PD speed controller according to the required specifications for the PMSM drive system. Then, the resulting closed loop transfer function of the PMSM drive system including the current control loop is used as the reference model. In addition to the 200F I-PD controller, a neural-network model-following controller whose weights are trained on-line is designed to realize high dynamic performance in disturbance rejection and tracking characteristics. According to the model-following error between the outputs of the reference model and the PMSM drive system, the NNMFC generates an adaptive control signal which is added to the 2DOF I-PD speed controller output to attain robust model-following characteristics under different operating conditions regardless of parameter variations and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed 200F I-PD NNMF controller. The results confirm that the proposed 2DOF I-PO NNMF speed controller produces rapid, robust performance and accurate response to the reference model regardless of load disturbances or PMSM parameter variations.

• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.198-204
• /
• 2012

무선센서 네트워크의 계층구조형 클러스터링 알고리즘은 센서노드의 효율적인 관리를 위해서 다양한 분야에 사용하고 있다. 계층형 클러스터링 구조에 많이 사용되는 LEACH(Low Energy Adaptive Clustering Hierarchy)는 확률 함수식을 사용하기 때문에 클러스터 헤드노드의 선출 개수가 일정하지 않다. 본 논문에서는 LEACH 알고리즘의 단점을 보완하여 매 라운드마다 고정된 개수의 클러스터 헤드노드를 선출하는 i-LEACH 알고리즘을 제안한다. i-LEACH(improved-LEACH)는 BS이 고정된 개수의 클러스터 헤드노드를 선출하여 네트워크 전체에 통보하기 때문에 클러스터링 구성과정의 네트워크 트래픽량을 줄일 수 있고, 네트워크의 에너지를 효율적으로 관리할 수 있다. 제안한 i-LEACH와 LEACH를 시뮬레이션 한 결과 i-LEACH에서는 클러스터 헤드노드의 선출과정이 제외되었기때문에 LEACH 보다 소비된 전력량은 25%, 네트워크 트래픽 량은 16% 향상되었다.