• 복식
• /
• 제59권1호
• /
• pp.159-167
• /
• 2009

Based on instructions in the textbook "How to Construct Korean Costumes" which I authored, my university students were required to make Pungcha-Baji(Korean traditional pants for children) for one-year-old boys. While examining the students' construction, I found that the side seams of the vest and pants did not line up but were improperly twisted. It was found that the pants did not cover the child's backside because the width of the back was smaller than the width of the front when one of the side panels and the large center panel in the front was half the size of the hip and one of the side panels and the small panel in the back was four fifths of half the size of the hip. Although there were differences between the waist size of the pants and the bottom hem of the vest, the textbooks instruct that the amount of material and the number of pleats(i.e. 4 pleats) on the pants and the vest should be the same. Finding this mistake led me to investigate Pungcha-Baji construction in related textbooks. Thus with the textbook instruction, the side seams of the pants and the vest do not match and are improperly twisted. Hence, as a solution, the pleats should be made and adjusted after matching the side seams of the pants and the vest. The purpose of this study is to examine currently available Pungcha-Baji related textbooks and determine the correctness of their instructions and to ultimately provide correct construction methods for Pungcha-Baji pattern for academic purposes.

• 융합보안논문지
• /
• 제1권1호
• /
• pp.21-29
• /
• 2001

인터넷의 급속한 발달은 대규모 네트워크를 형성하였고 그에 따른 정보를 위협하는 요소의 형태 역시 점차 다양화되고 분산화된 형태를 나타낸다. 이러한 공격 형태의 변화에 대응하기 위해서는 단일 탐지 엔진을 갖는 침입탐지시스템만으로는 탐지가 어렵게 된다. 본 논문에서는 기존의 침입 탐지 기능 이외에 대규모 네트워크 상에서 이루어지는 다중 동시 공격을 효과적으로 감지할 수 있는 분산 침입탐지시스템을 설계 구현하였다. 이를 위해 감시 대상 호스트들에 침입 탐지엔진을 독립된 에이전트로 설치한 후, 이들이 생성하는 감사 데이터를 토대로 하여 침입 판정을 내린다. 독립적으로 운영되었던 이전 버전에 비하여 새로운 버전은 이처럼 분산화되어 있을 뿐만 아니라 탐지 규칙에 대한 세계 표준화 동향인 CVE를 따르도록 개선되었다.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.533-542
• /
• 1995

The present study investigated the effectiveness of pretreatment on dentin bonding. The adhesive resin was 5% 4-methacryloyloxyethyl trimellitate anhydride (4-META) in methyl methacrylate (MMA) combined with poly-MMA powder. Polymerization of this resin was initiated by tri-n-butyl borage (TBB). Ground bovine dentin samples were etched with either an aqueous solution of 10% citric (10-0 solution) (Group I) or aqueous solution of 10% citric acid and 3% ferric chloride(10-3 solution) (Group ll ). After etching, the primer (an aqueous solution of 35% hydroxyethyl methacrylate (HEM- A) and 5% glutaraldehyde was applied on the differently etched surfaces (Group III , Group IV). The 10-0 treatment showed the lowest tensile bond strength, followed by the 10-3 treatment, primer application after the 10-0 treatment and primer application after the 10-3 treatment. The relationship among the surface morphology after pretreatment, fractured surface morphology and tensile bond strength was examined. It revealed that the surface morphology change by different pretreatment influenced the bond strength and the resulting fractured surface morphology. The correlation of tensile bond strength with the fracture morphology was explained.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.220-223
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔK$_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - ΔK in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.e.greatly affect a material with decreasing temperature.

• 복식
• /
• 제59권8호
• /
• pp.26-36
• /
• 2009

The aim of this study is to be the fundamental study for virtual clothing system of the future through a comparative analysis of the difference between a virtual frill skirt and a real frill skirt using a 3-dimensional Apparel cad system. Satin was selected as a comparative fabric of the real skirt and virtual skirt. And compared skirts are frilled 1.5widths, 2widths, and 2.5widths. In case of 1.5widths frilled, the real skirts and virtual skirts showed no significant difference except in shirring frill expression. However, in case of 2widths frilled, and 2.5widths frilled skirts, significant differences in the extent of frill flattening, the sectional diagram of the bottom hem, and the skirt shape. The virtual skirt showed that as its multiple proportion of frill increased, the sidelines of the skirt drooped and excessively extended, and collision detection that the belt was twisted and torn apart arose. Furthermore, not only the frill but also the shape of the skirt was transformed, and the bottom hems were widened back and forth, and the sectional diagram of the bottom hems were transformed into rounded shapes.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• 한국지역사회생활과학회지
• /
• 제22권1호
• /
• pp.53-61
• /
• 2011

We have made knitwear in a different way from the typical woven pattern; it does not have the dart, even for women's tops. The purpose of this research was to compare the fit and appearance of the torso pattern for circular knitted fabric between virtual try-on garments and real garments. First, a woman in her 20's was scanned by a 3D body scanner, and thus producing a virtual avatar. I prepared knit patterns and created a torso pattern appropriate for circular knitted fabric. Next, I measured the body size of the avatar. The 2D patterns for the torso and sleeves were developed using the Yuka Super ALPHA : Plus. The 3D virtual garments were made from the imported 2D patterns and were then tried on the 3D virtual avatars. Finally, the fit of the real garments and the virtual garments was compared. While the shape of the virtual try-on garments were similar to the real garments, the folding and sagging were different. This study found the length was the same as woven wear. However the actual bust size and the clothing size were the same which is not a typical characteristic of woven wear. In the case of hem measurement, more space was needed than actual body size but less space was needed than in woven patterns.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.564-573
• /
• 2010

The purpose of this study is to investigate decoration techniques applied to the Korean traditional costume of modern style which are shown in special monthly magazines relevant to the traditional magazine. Findings of the study can be summarized as follows. The types of decoration techniques applied to the Korean traditional costume are largely classified into single and composite types. In the traditional costume of the former type, a quite many of gold and silver foils and embroideries are found. While, in that of the latter type, a combination of two different decorations, embroideries and seonchigi or multi-colored stripes and seonchigi is often used. These decoration techniques are usually applied to some parts of the costume like git, kkeutdong or cuffs, somae or sleeves, seop, goreum or coat strings, jacket or jeogori, the lower hem of the skirt and between joined parts in the skirt. Used together with the techniques, patterns are usually applied onto embroideries and gold or silver foils. Most of the patterns are flower in shape. The main material of the Korean traditional costume is fabrics that have no pattern on the surface and are commercially available irrespective of season. Git used for jeogori is largely classified into dangko git and donggrae git in type. Its color is in most cases same as the main color of jeogori. Keutdong for jeogori is usually 4 to 5.5 cm in breadth, classified as type II. Its color is in most cases white. Goreum for jeogori is usually large in length. Its color is most cases same as that of jegori or reddish purple or blackish red purple.

• Journal of Chest Surgery
• /
• 제25권2호
• /
• pp.125-130
• /
• 1992

To evaluate the effect of oxygenation[95% O2+5% CO2] of St. Thomas Hospital No.2 cardioplegic solution[Plegisol], 20 isolated perfused rat hearts were studied under hyp-othermic[20oC] ischemic arrest for 2 hours with infusion of cardioplegic solution every 30 minutes throughout the ischemic period. Ten isolated hearts were studied with the oxygenated cardioplegic solution and 10 another isolated hearts with the nonoxygenated one. Mean oxygen tensions of the nonoxygenated and oxygenated cardioplegic solutions were 150mmHg and 470mmHg, respectively. Two in 10 hearts infused with the nonaxygenated cardioplegic solution were not recovered from nonworking heart due to persistent ventricular fibrillation. In comparing hem-odynamic parameters between both groups, the mean postischemic recovery[expressed as a percentage of its preischemic control value] was significantly greater with the oxygenated solution[in 10 recovered hearts] than the nonoxygenated solution[in 8 recovered hearts] [95.9$\pm$1.8% compared with 88.5$\pm$2.9% in peak aortic pressure, p<0.05, 75.7$\pm$5.2% compared with 43.5$\pm$6.5% in aortic flow, p<0.01, 75.5$\pm$4.6% compared with 54.1$\pm$5.6% in cardiac output, p<0.01, 78.3$\pm$4.6% compared with 60.3$\pm$4.6% compared with 60.3$\pm$6.2% in stroke volume, p<0.05, and 80.4$\pm$5.3% compared with 58.6$\pm$7.0% in dP/dT, p<0.05]. It is concluded that oxygenation of St. Thomas Hospital No.2 cardioplegic solution improves cardiac electrical stability and postischemic hemodynamic recovery after ischemic arrest in the isolated perfused rat heart.

• 대한가정학회지
• /
• 제34권2호
• /
• pp.43-55
• /
• 1996

The purpose of this study was to investigate the slacks pattern making on the movement-fitness of the knee region. The experimental items were divided into the lower limb movement (M1~M5) and slacks pattern designs (4 : basic pattern, in-pleats, side-pleats, seam-line increase). This study was done by clothing pressure test, sensory evaluation test and the difference shape-transformation of wearing-slacks. The summarized finding resulted from experiments and investigation are suggested as follows ; First, the clothing pressure test showed that the order of clothing pressure in the movement was the rabbit leap movement (M3), the sit on knees (M4), the nobleman sitting (M5), the sit on chair (M2) from the highest to the lowest. In the comparison of clothing pressure tested by blocks of lower-limb, center front knee region shows the highest of 300g/cm2. In it by constructional methods, the clothing pressure of in-pleats, side-pleats methods shows lower than basic pattern, hem-line increase methods. Also in comparison of the two methods, in-pleats method shows lower than side-pleats method. Second, by the sensory evaluation test based on the lower-limb movements and constructional methods of slacks, it was found that the functional factor score of the rabbit leap movement was also the waist, hip, knee region was the lowest in all blocks. And in the comparison of constructional methods, in-pleats method was the highest in all methods. Third, in consideration of the difference in the shape-transformation of wearing-slacks on the movement-fitness, pleats pattern design methods showed that the ratio of shape-transformation was lower than basic on seam-line increase methods. But the difference of the side-pleats and in-pleats methods was litle. According to these investigation, the slacks pattern making caused by movement-fitness on the knee region, in-pleats design method was the functional slacks pattern.