• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1068-1073
• /
• 1987

Traditional circuit partitioning algorithm using the cluster development method, which is suitable for such applications as single chip floor planning or multiple layer PCB system placement, where the clusters are formed so that inter-cluster nets are localized within the I/O connector pins, may not be appropriate for the functiona block placement in truly 3-D electronic modules. 3-D hybrid IC is one such example where the inter-layer routing as well as the intra-layer routing can be maximally incorporated to reduce the overall circuit size, cooling requirements and to improve the speed performance. In this paper, we propose a new algorithm called MBE(Minimum Box Embedding) for the layer assignment of each functional block in 3-D hybrid IC design. The sequence of MBE is as follows` i) force-directed relaxation in 3-D space, ii) exhaustive search for the optimal orientation of the slicing plane and iii) layer assignment. The algorithm is first explaines for a 2-D reduced problem, and then extended for 3-D applications. An example result for a circuit consisting of 80 blocks has been shown.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.230-233
• /
• 1995

Using Polyimide Langmuir-Blodgett(LB) films as a tunneling barrier, Current -Voltage(I-V) characteristics and inelastic electron tunneling spectroscoupy(IETS) of the junctions incorporating 1-layer orgainc monolayer were invesgated. Several peaks originating in vibrational modes of constituted molecules of 1-layer monolayers were clearly observed in the IET spectra.

• Applied Microscopy
• /
• 제28권3호
• /
• pp.363-377
• /
• 1998

After the investigation on the eye of Incilaria fruhstorieri with light and electron microscopes, the following results were obtained. The eye of Incilaria fruhstorferi comprises cornea, lens, vitreous body, retina, and optic nerve inward from the outside. Cornea is composed of squamous, cuboid, columnar and irregular cells, which appear to be light due to their low electron density. In their cytoplasms, glycogen granules, multivesicular body, and nucleus were observed. Vitreous body, located behind non-cellular transparent lens, is filled with long and short microvilli protruding from the retinal epithelia. Retinal epithelium, the organ to perceive objects, is divided into four parts; microvillar layer pigment layer, nuclear layer, and neutrophils layer, from the apical portion. Microvillar layer consists of the type-I photoreceptor cells and pigmented granule cells. In the apical portion of their cytoplasms, long microvilli (length, $19{\mu}m$) , short microvilli (length, $8{\mu}m$), and rolled microvilli grow thick in the irregular and mixed forms. Photoreceptor cells are classified into type-I and type-II, according to their structures. The type-I cell has the apical portion rising roundly like a fan and the lower part which looks like the helve of a fan. In the cytoplasm of the apical portion, there are clear vesicles, cored vesicles, ovoid mitochondria, and microfilaments, and in the cytoplasm of the lower part, photic vesicles with their diameters about 60nm aggregate densely. The type-II photoreceptor cell, located at the lower end of the type-I cells, has a very large ovoid nucleus 3nd no microvilli. In the cytoplasm of the type-II cell, the photic vesicles with sizes 60nm aggregate more densely than in the cytoplasm of the type-I cell. Pigmented cells are classified into type-A and type-B, according to their structures. The type-A is identified to be a large cell containing round granules (diameter, $0.5{\mu}m$) of very high electron density, while the type-B is identified as a small cell where the irregular granules (diameter, $0.6{\mu}m$) of a little lower electron density amalgamate. Nuclear layer ranges from the bottom of pigment layer to the top of the capsule, and contains three kinds of nuclei (nuclei of the type-II photoreceptor cell, pigmented granule cell, and accessory neuron). The capsules covering the outmost part of the eyeball are composed of collagenous fiber and three longitudinal muscle layers (the thickness of each longitudinal muscle layer, $0.4{\mu}m$) and thick circular muscle layer (thickness, $0.3{\mu}m$). Around the capsules, there is a neurophile layer consisting of neurons and nerve fibers. Each neuron has a relatively large ovoid nucleus for its cytoplasm, and in the karyosome, large lumps of keterochromatin form a wheel nucleus.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.403-403
• /
• 2011

TCO/p/i/n 구조의 비정질 실리콘 박막 태양전지의 제작에 있어서 a-Si 혹은 넓은 밴드갭 물질인 SiOx, SiC 등은 window layer로 주로 사용 되어왔다. 그러나 ${\mu}c$-Si는 우수한 광학적, 전기적 특성에 불구하고 낮은 activation energy에 의한 p/i interface 에서의 band-off set에 의한 정공재결합에 의해 사용되어 지지 못했다. 이러한 재결합은 p/i interface상에 buffer layer를 삽입함으로써 개선되어 질 수 있다. 본 논문에서는 비정질 실리콘 보다 넓은 광학적 밴드갭을 가지는 a-SiOx 박막을 완충층으로 사용하여 p/i 계면에서의 재결합 감소에 대한 시뮬레이션을 수행하였다. a-SiOX 박막 내에 포함 된 산소의 양에 따라 밴드갭을 조절하여 1.8eV~2.0eV 사이의 완충층을 삽입하여 박막태양전지의 개방전압, 단락전류, 효율 등에 끼치는 영향을 ASA 시뮬레이션을 통하여 알아보았다.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1163-1172
• /
• 2001

The two dimensional problem of a layered tribological system(TiN/Steel) containing a vertical surface breaking crack and subject to rolling contact is considered in this study. Using finite elements and stress extrapolation method, a series of preliminary models are developed. Preliminary results indicate that the extrapolation technique is valid to determine Modes I and II stress intensity factors for cracks. In the case of TiN/Steel medium, KI and KII were determined for variations in crack length, layer thickness, and load location. The results show that KII reaches maximum values when the contact is adjacent to the crack where Mode I stresses are compressive. KII values decrease with decreased crack length and significantly decrease for reduced layer thickness.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1990년도 특별강연 및 추계학술발표 개요집
• /
• pp.145-147
• /
• 1990

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.2037-2042
• /
• 2013

기존 DSSC의 상대전극을 TCO-less로 하여 도전성과 촉매기능을 동시에 가지고 있는 Pd의 안정성 확인을 위해 열증착기를 채용하여 유리기판 전면에 Pd를 90nm 두께로 증착하고 전해질과의 반응 안정성을 확인하였다. $0.45cm^2$급 면적을 가진 glass/FTO/blocking layer/$TiO_2$/dye/electrolyte(10 mM LiI + 1 mM $I_2$ + 0.1 M $LiClO_4$ in acetonitrile solution)/Pd/glass 구조의 DSSC 소자를 만들고, 시편제작 1시간, 12시간 후의 변화를 육안분석, 광학현미경과 FESEM을 이용하여 미세구조 분석을 진행하고, 전기적 분석은 각각 C-V(cyclic voltammetry measurements), I-V(current voltage) 분석을 통해 확인하였다. 미세구조 분석을 통하여 시간이 지남에 따라 확연히 Pd과 전해질이 반응하여 부식되는 것을 확인하였고, 전기적으로도 시간이 지남에 따라 촉매활동도와 효율이 감소하는 것을 확인하였다. 최종 효율은 1시간 후에는 0.34%의 광전효율을 보였으나 12시간 후에는 0.15%를 나타내어 약 44%로 감소하였다. 따라서 염료감응태양전지에 Pd촉매를 채용하기 위해 $I^-/I_3{^-}$ 전해질이 아닌 다른 전해질을 사용하거나 Pd 전극이 아닌 다른 촉매재를 사용해야 함을 확인하였다.

• Korean Journal of Acupuncture
• /
• 제34권1호
• /
• pp.37-46
• /
• 2017

Objectives : The acupuncture about acupoint affects the production of NO, NOS, and NE.Local action of acupuncture is important for acupuncture treatment. To prove this, the revelation degree of NO, NOS, and NE was observed by stimulating the acupuncture at the connecting point of SP4, KI4, and LR5 in the depths of Superficial layer, Middle layer and Deep layer. Methods : Needles were inserted into rats, on each right and left sides of the connecting point, SP4, KI4 and LR5 acupoints which are the stream points of the foot meridian. After insertion, needles were retained for three minutes. After the retention, rat was sacrificed via cardiac puncture, and tissues of each SP4, KI4 and LR5 point near meridian vessel was extracted to examine the changes in the expression of NO, NOS and NE. Results : In terms of the effect in NO production, there was significant increase in the Superficial layer, Middle layer and Deep layer at KI4. In terms of the effect in NE production, there was significant decrease in the Superficial layer at SP4 and increase in the Superficial layer, Middle layer and Deep layer at LR5. In terms of the effect in nNOS production, there was significant increase in the Superficial layer, Middle layer and Deep layer at SP4 also in the Superficial layer at KI4. In terms of the effect in eNOS production, there was a significant increase in the Superficial layer, Middle layer and Deep layer at SP4, KI4 and LR5. In terms of the effect in iNOS production, there was significant increase in the Superficial layer, Middle layer and Deep layer at SP4, KI4 and LR5. Conclusions : The effect of acupuncture applied at the connecting point of six meridians of the foot on the activities of NO, NOS and NE could be observed, and it can be induced from the effect of needle stimulation on disrupted local and systemic nervous responses.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1936-1939
• /
• 2004

This paper proposes streaming layer for personal robot's middleware. Under assumption that robot has open architecture, i.e. consists of modules created by different vendors and intercommunication between these modules is necessary, we have to consider that there are many different network interfaces. To make communication between modules possible it is necessary to develop new type of middleware. Such middleware has to support different platforms, i.e. OS, network interface, hardware, etc. In addition, it is necessary to implement effective interface between network and application in order to manage inter application communications and use network resources more effectively. Streaming layer is such interface that implements necessary functionality together with simplicity and portability. Streaming layer provides high level of abstraction and makes communication between distributed applications transparent as if are located in same module. With possibility of extension by user defined application interfaces it is suitable for distributed environments, i.e. module based architecture including small-embedded systems like as DSP board. To verify the proposed streaming layer structure it is implemented using C and tested.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.275.1-275.1
• /
• 2014

The effects of the interfacial buffer layer and temperature on the organic bulk heterojunction (BHJ) nanostructures of copper phthalocyanine (CuPc) and fullerene (C60) systems were investigated using real time in-situ x-ray scattering. In the CuPc:C60 BHJ structures, standing-on configured ${\gamma}$-CuPc phase was formed by co-deposition of CuPc and C60. Once formed ${\gamma}$-phase was thermally stable during the annealing upon $180^{\circ}C$. Meanwhile, the insertion of CuI buffer layer prior to deposition of the CuPc:C60 BHJ layer induced lying-down configured CuPc crystals in the BHJ layer. The lying CuPc peak intensity and the lattice parameter were increased by the thermal annealing. This increment of the intensity seemed to be related to the strain at the interface between CuPc:C60 and CuI, which was proportional to the enhancement of the power conversion efficiency of the device.