• 한국전자통신학회논문지
• /
• 제10권7호
• /
• pp.813-818
• /
• 2015

사물 인터넷(IoT)은 물리적 객체나 전자 제품, 소프트웨어, 센서 및 제조업체, 운영자 또는 연결된 다른 장치와 데이터를 교환하여 더 큰 가치와 서비스를 달성 할 수 있도록 연결된 사물 네트워크를 말한다. 지금까지 계량 정보 분석과 미래 유망영역 탐지에 대한 연구는 키워드를 중심으로 수행해왔다. 본 논문에서는 문헌에서 키워드 매핑에 대한 동태적 분석을 통하여 최근에 관심 영역인 사물 인터넷에 대한 미래 유망 영역을 탐지하는 방법을 제시한다.

• 한국주조공학회지
• /
• 제16권2호
• /
• pp.116-123
• /
• 1996

The equipment for the horizontal continuous casting was built to produce hyper-eutectic Al-Si bars with a small cross-section of 25mm in diameter. The manufacturing processes including withdrawal cycle and secondary cooling methods were modified to refine the primary and the eutectic Si. The longitudinal casting speeds varied over the ranges of 670-1100mm/min for pure Al, and 200-350mm/min for Al-17wt%Si alloy. Due to the difference of cooling rate in the mould, microstructural asymmetry between the lower and the upper part of bar was observed. Thus, manufacturing processes such as cooling and withdrawal method were optimally combinated to get the homogeneous cast structure. With the increase of casting speed, the primary Si size was refined down to $30{\mu}m$ near the surface, and $80{\mu}m$ in the center of the bar.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (상)
• /
• pp.747-750
• /
• 2000

하이퍼 프리젠테이션의 개념은 하이퍼 미디어처럼 시간에 따라 변하는 멀티미디어 프리젠테이션들이 서로 동적으로 연결되어 있고, 하이퍼 링크의 내용이 연속적 프리젠테이션 동안 시간에 따라 변화될 수 있는 것이다. 하이퍼 프리젠테이션 메일을 위해 PUSH 및 PULL 방식의 스트림 엔진이 사용될 수 있다. 협대역 네트웍망 또는 인터넷 망에서 하이퍼 프리젠테이션 메일의 연출을 위해서는 PULL 방식의 데이터 전송 방법이 유일한 대안이다. 주요 논점은 최적의 버퍼를 관리하는 방법과 실시간 연출을 위해 하이퍼 프리젠테이션을 포함한 스트림 스케줄링 기법을 찾는 것이다. 이 논문에서 하이퍼 프리젠테이션을 포함한 멀티미디어 메일의 개념을 제안하며, 역시 저속의 인터넷상에서 실시간으로 연출되어지는 프리젠테이션 메일의 방법을 기술한다.

• Agricultural and Biosystems Engineering
• /
• 제2권1호
• /
• pp.15-23
• /
• 2001

On the assumption that the voices of the cows are produced by the linear prediction filter, we characterized the cows’voices. The order of this filter was determined by examining the voice characteristics both in time and frequency domains. The proposed order of the linear prediction filter is 15 for modeling voice production of the cow. The characteristics of the amplitude envelope of the voice signal was investigated by analyzing the sequence of the short time variance both in time and frequency domains, and the new parameters were defined. One of the coefficients o the linear prediction filter generating the voice signal, the fundamental frequency, the slope of the straight line regressed from the log-log spectra of the short time variance and the coefficients of the linear prediction filter generating the sequence of the short time variance of the voice signal can differentiate the two cows.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.579-584
• /
• 2004

In development of the bogie, the fatigue strength of the bogie frame is an important design criteria. Also the bogie frame weight reduction is required in order to save energy and materials. In this study. structural analysis of bogie frame by using the finite element method has been performed for the various loading conditions according to the UIC standards and it has been attempted minimize the weight of bogie frame by back-propagation neural network and genetic algorithm. Finite element mesh generation and finite element analysis were performed by Altaire Hyper Mesh and ABAQUS.

• 혜화의학회지
• /
• 제13권2호
• /
• pp.289-302
• /
• 2004

Recently many effort focused to understand the mechanical insights of melanogenesis to develop the agent for hyper-pigmentation. So this study was performed to investigate the depigmentation of many herb. This study show that many herb which were generally used for external application have some depigmentation effects. So we should use them for whitening agents and the depigmentation effects of the other natural subjects which were generally used for external application should be examined. In the future, it is nessary more study on the manufacturing method, the time of use and the dose.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.235-238
• /
• 2005

The seismic fragility analyses of reinforced concrete propelled beam are performed to evaluate safety margin. The models were simulated by Latin Hyper-Cube (LHC) method considering various aging-related deterioration of RC beam. Fragility curves under various condition subjected to static load are compared. It is found that the 20$\%$ loss of top and bottom steel 15$\%$ lower than the undegraded beam in the ultimate strength. Seismic fragility analyses were performed to find out the effect of aging-related deterioration on the dynamic behaviour of RC beam.

• Journal of the Korean Data and Information Science Society
• /
• 제26권6호
• /
• pp.1537-1545
• /
• 2015

Support vector quantile regression (SVQR) can be obtained by applying support vector machine with a check function instead of an e-insensitive loss function into the quantile regression, which still requires to solve a quadratic program (QP) problem which is time and memory expensive. In this paper we propose an SVQR whose objective function is composed of an asymmetric quadratic loss function. The proposed method overcomes the weak point of the SVQR with the check function. We use the iterative procedure to solve the objective problem. Furthermore, we introduce the generalized cross validation function to select the hyper-parameters which affect the performance of SVQR. Experimental results are then presented, which illustrate the performance of proposed SVQR.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1419-1427
• /
• 2008

This paper shows the kernel Poisson regression which can be applied in the claims reserving, where the row effect is assumed to be a nonlinear function of the row index. The paper concentrates on the chain-ladder technique, within the framework of the chain-ladder linear model. It is shown that the proposed method can provide better reserve estimates than the Poisson model. The cross validation function is introduced to choose optimal hyper-parameters in the procedure. Experimental results are then presented which indicate the performance of the proposed model.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.186-191
• /
• 2008

A lot of equipments installed in ships must be isolated for relaxing the shock, vibration and noise using the elastic mounts. Most of the elastic mounts are made of the rubber, however it is not easy to design the effective rubber mount. Because, in general, the rubber has a non-linear constitutive characteristics especially for a large deformation. So, there are many difficulties to estimate the accurate structural response of rubber which is the basis of the shape design of the mounts. In this study, the detailed non-linear viscoelastic large deformation finite element analysis method was dealt with. And to verify validity of the present analysis scheme, the results were compared with experiments.