• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.

• 약학회지
• /
• 제36권6호
• /
• pp.513-517
• /
• 1992

The effect of solubility and hygroscopicity of some tablet diluents on the disintegration of enzyme tablets was investigated. Tablets were prepared by direct compression method using sodium starch glycolate, crospovidone, croscarmellose sodium and low-substituted hydroxypropyl cellulose as super disintegrants. Lactose, dextrose, sucrose, sorbitol and calcium phosphate dibasic were selected as typical diluents in this study. They were different in solubility (sucrose, sorbitol>dextrose>dextrose>lactose>calcium phosphate dibasic) and hygroscopicity (sorbitol>sucrose>dextrose>caicium phosphate dibasic, lactose). The disintegrants accelerated differently the disintegration of the tablets prepared with different diluents in the decreasing order of calcium phosphate dibasic>lactose>dextrose>sucrose and sorbitol. These results indicate highly soluble and/or hygroscopic diluents decrease the efficiencies of super disintegrants in the enzyme tablets.

• 한국군사과학기술학회지
• /
• 제2권1호
• /
• pp.110-120
• /
• 1999

본 논문은 흡습환경에서 온도변화를 겪는 무한히 긴 속빈 실린더의 시간변화에 따른 흡습열 응력 변화에 관해서 연구한 것이다. 평면변형률 가정에 기초한 흡습열탄성론의 방정식이 열과 습기 사이의 연성효과를 고려하여 수립되었다. 시간경과에 따른 흡습열 응력을 구하기 위한 완전한 형태의 해가 연성분리기법과 변수분리방법을 이용하여 구하였으며, 온도와 습도 집중치의 분포를 포함한 수치적인 적용 예에 대한 결과를 분석하였다. 시간경과에 따른 흡습열 특성이 직교이방성 속빈원통벽에서 변위와 응력의 변화 및 분포에 미치는 영향을 함께 제시하였다.

• 한국정보전자통신기술학회논문지
• /
• 제8권5호
• /
• pp.354-358
• /
• 2015

DOT-3 규격의 자동차 브레이크액에 대하여 수분 함유량과 시스템 마찰로 인한 오염도를 전기저항과 광학 투과율을 측정하여 비교하였다. 기존의 저항측정법은 수분 함유량을 주로 측정하는 반면에 광학 투과율 방식은 제동장치 내부의 마찰에 의하여 발생된 입자의 오염을 포함하여 측정할 수 있어서 저항변화 측정보다는 광학 투과율 방법이 더 선형적이고 효율적이었다.

• Advances in materials Research
• /
• 제12권4호
• /
• pp.309-330
• /
• 2023

The humid thermal vibration characteristics of a nonhomogeneous thermopiezoelectric nonlocal plate of polygonal shape are addressed in the purview of generalized nonlocal thermoelasticity. The plate is initially stressed, and the three-dimensional linear elasticity equations are taken to form motion equations. The problem is solved using the Fourier expansion collocation method along the irregular boundary conditions. The numerical results of physical variables have been discussed for the triangle, square, pentagon, and hexagon shapes of the plates and are given as dispersion curves. The amplitude of non-dimensional frequencies is tabulated for the longitudinal and flexural symmetric modes of the thermopiezoelectric plate via moisture and thermal constants. Also, a comparison of numerical results is made with existing literature, and good agreement is reached.

• 산업기술연구
• /
• 제38권1호
• /
• pp.15-19
• /
• 2018

In this study, hyaluronic acid (HA) was electro-spun to fabricate nanofibrous membranes for support materials. Because HA is very hygroscopic, it is difficult to obtain enough viscosity to apply electrospinning method. Therefore, we mixed HA with polyethylene oxide (PEO) to obtain proper viscosity and added adipic acid (ADH) to promote cross-linking of PEO/HA during electrospinning. The morphology of PEO/HA membrane was optimized according to PEO/HA concentration ratio and spinning rate. Finally, we fabricated gold-nanoparticle-embedded PEO/HA membranes and their catalyst activities were evaluated in tetramethylbenzidine (TMB) oxidation.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.119-125
• /
• 2013

IInsulation material is generally used for preventing heat loss from heat transport fluids, and water absorption severely reduces the insulation property. The purpose of this study is to evaluate the amount of water absorption supplied by the pouring method and spraying method, to investigate the effects of water absorption on the thermal conductivity of an insulation material, and modeling the relation between water absorption and thermal conductivity. E-glass, a kind of glass fiber, and HYPERLITE, mainly composed of pearlite, are selected, to compare hygroscopic and insulation properties. E-glass is found to have much higher water absorptivity, compared to HYPERLITE. The thermal conductivity of the water-absorbed E-glass is increased by more than 150%, compared to that of no absorption, while variation of the thermal conductivity of HYPERLITE with water absorption is insignificant. A three-stage model of water absorption for thermal conductivity is developed, and the modeling results are found to be in good agreement with the experimental data.

• 한국환경보건학회지
• /
• 제44권1호
• /
• pp.1-14
• /
• 2018

Objectives: The purpose of this study is to investigate the main cause of visibility impairment by analyzing the contributions of the light extinction coefficient of major air pollution components and the change of the light extinction coefficient by relative humidity. Methods: The characteristics of the light extinction coefficient calculated by the photochemical method using fine particle component data measured in 2015 in the Gwangju area were examined. Results: The extinction efficiency per unit mass of $PM_{2.5}$ particles was $4.5m^2/g$ and that of $PM_{10-2.5}$ particles was $0.6m^2/g$. This difference indicates that most of the visibility impairment in Gwangju was caused by $PM_{2.5}$ particles. When visibility was poor, the contribution of ammonium sulphate and ammonium nitrate was significantly increased. Relative humidity was also a major cause of visibility decay. The influx of air currents in Gwangju was mostly caused by the long distance movement of pollutants emitted from the eastern part of China. Ammonium sulphate and ammonium nitrate, which are hygroscopic secondary contaminants, were the main causative agents of visibility impairment. Conclusions: Ammonium sulphate and ammonium nitrate were the main causative agents of visibility impairment in Gwangju. The influx of air currents in Gwangju was mostly caused by the long distance movement of pollutants emitted from the eastern part of China.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.124-127
• /
• 2001

In this study, the electrical properties of polymer thin film layered by spin-coating method was investigated, and this polymer is one of the polymer applied to insulation layer for display, this polymer has relatively high dielectric constant, hygroscopic property and easy to make thin film by spin-coating. That is, in this study use the polymer that is cyano acrylate terpolymer, and the MIM(Metal/Insulator/Metal) structures were fabricated to measure the electrical properties such as Voltage-Current characteristics and dielectric characteristics. Also the conductivity and dielectric constant has been calculated. As a result, the conductivity in room temperature was $0.85{\times}10^{-14}{\sim}1.35{\times}10^{-14}$[S/cm]. The fact that this polymer be acted as insulator can be supported by this result. The dielectric constant was calculated as $10.39{\sim}12.05$ higher than Dopont Inc., this make it possible to accumulate more charges in insulation layer under same condition.

• 한국방재학회 논문집
• /
• 제5권2호
• /
• pp.45-56
• /
• 2005

구름씨뿌리기 방법에 의한 안개조절의 가능성을 파악하기 위해 대관령 산악지역의 구름특성을 분석하였다. 구름씨뿌리기에 의한 안개조절은 흡습성 물질을 이용한 온안개 소산에 집중되고 있다. 이 연구에서는 관측된 안개의 특성을 통계적으로 분석하고 이에 대해 논의하였다. 안개의 대부분은 여름철에 발생한 온안개이고 6시전 이른 아침에 발생하여 7시${\sim}$9시 소산되는 특성을 보인다. 봄철과 겨울철에는 AgI시딩에 적합한 동풍계열의 냉안개가 발생한다. 이 결과로부터 안개소산에 적합한 구름씨뿌리기방법과 물질을 추론할 수 있으며 이는 실제 냉안개와 온안개 실험에 적용할 수 있다.