• Macromolecular Research
• /
• v.10 no.3
• /
• pp.140-144
• /
• 2002

Dispersion polymerization of acrylamide was carried out in the media of methyl alcohol/$H_2O$ mixtures using hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively. The effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, methyl alcohol/$H_2O$ ratio, and purification of monomer and nitrogen purge on the particle size of the latices and molecular weight of the polymers were investigated. The average particle diameter increased with increasing concentration of initiator, water content in methyl alcohol/$H_2O$ media, and polymerization temperature, but decreased with monomer and stabilizer concentrations. The viscosity average molecular weight increased with increasing concentrations of monomer, steric stabilizer, and water content in dispersion media, but decreased with initiator concentration and polymerization temperature. The PAM polymers prepared with the purified monomer and the nitrogen purging before the reaction showed the highest molecular weight.

• Journal of the Korean Ceramic Society
• /
• v.31 no.1
• /
• pp.1-10
• /
• 1994

Monodispersed alumina and Mg-doped alumina fine particles were prepared by controlled hydrolysis of alkoxides. Aluminium alkoxide and magnesium alkoxide were dissolved into complex solvent which was composed of hydrophobic n-octanol and hydrophilic acetonitrile. Hydroxypropyl cellulose(HPC) was used as a dispersant for the alumina particles. The size of these prepared powders was approximately 0.3 ${\mu}{\textrm}{m}$. In the case of sintering above 100$0^{\circ}C$, most of these prepared powders were transformed to $\alpha$-alumina. The relative density of the sintered body of these prepared powders at 1$600^{\circ}C$ was 98%. The sintered body of the Mg-doped alumina powder had more uniform grain size than that of the undoped alumina podwer.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.3
• /
• pp.213-217
• /
• 1997

The present sustained-release terfenadine-pseudoephedrine HCl dosage form was the core tablet composed of outer (fast-release) layer containing 60 mg of terfenadine and l0mg of pseudoephedrine HCl, and inner (sustained-release) layer containing 110 mg of pseudoephedrine HCl. The purpose of this study was to investigate the possibility of formulating the terfenadine-pseudoephedrine HCl double-layered tablet which was bioequivalent to the core tablet. Its sustained-release and fast-release layer were formulated with disintegrating agents and polymers, respectively, varying with their kinds and amounts. The comparative dissolution test of double-layered and core tablet was carried out at pH 1.2, 4.0 and 6.8, leading to select composite of double-layered tablet whose dissolution pattern was similar to that of core tablet. It was composed of fast-release layer containing 60mg of terfenadine. 10 mg of pseudoephedrine HCl, sodium bicarbonate, microcrystalline cellulose and sodium starch glycolate, and sustained-release layer containing 110 mg of pseudoephedrine HCl and ethylcellulose/hydroxypropyl methylcellulose) (110/30 mg/tablet).

• Journal of ILASS-Korea
• /
• v.26 no.3
• /
• pp.120-126
• /
• 2021

Combustion characteristics of a 1-butanol gel fuel were studied in atmospheric pressure condition. The butanol gel fuel was manufactured by adding hydroxypropyl-methyl cellulose (HPMC) as a gellant and the effect of the gellant concentration was observed. The combustion process of a single butanol gel droplet was divided into 3 stages including droplet heating, microexplosion, and gellant combustion. The flame was distorted compared to butanol + water mixture because of micro-explosion during the combustion. Increase of gellant concentration delayed the droplet ignition, but the combustion rate was improved due to the mass ejection during the micro-explosion.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.41-48
• /
• 2019

The effects of HPMC (hydroxypropyl methylcellulose) on instant fried noodles regarding oil uptake and in vitro lipid digestibility were evaluated according to different viscosity levels, as well as the same apparent viscosity. The oil uptake and lipid digestibility decreased with the increasing HPMC viscosity and replacement level, demonstrating that the reduced oil uptake and lipid digestibility may be caused by the high viscosity of HPMC. Furthermore, the oil uptake and lipid digestibility of noodles with HPMC at both apparent viscosities decreased with the increasing viscosity of HPMC in spite of having the same apparent viscosity. As a result, the high viscosity of HPMC on instant fried noodles was more critical factor compared to apparent viscosity for lowering oil uptake and lipid digestibility.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.269-273
• /
• 2010

The primary objective of this work is to find the optimal condition for the granule tablet formulation of alfuzosin-HCl that aims to achieve a sustained drug release. (Hydroxypropyl)methyl cellulose (HPMC) is one of the most widely used polymer as a drug formulation and therefore has been utilized in this study as an excipient. Alfuzosin-HCl granule tablet was developed using the various viscosities of HPMC and the effects of viscosity on drug release was investigated. Fourier transform-infrared (FTIR) and X-ray diffraction (XRD) were employed to investigate the chemical structure and crystallization of alfuzosin-HCl in the formulation. We prepared the granule tablet by a direct compression method and studied the release profile in the stimulated intestinal fluid (pH 6.8). As the viscosity of HPMC increased the release of alfuzosin-HCl decreased, demonstrating that controlled release of alfuzosin-HCl can be achieved by varying the viscosity of HPMC.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.523-534
• /
• 2002

A new hydroxypropylcellulose (HPC) capable of exhibiting reflection colours in the temperature ranges of about 60-$130^{\circ}C$ and acrylic acid esters of HPC (ESs) with degree of esterification (DE) ranging from 1 to 3 were synthesized. The crosslinked ES films with the optical pitch ($\lambda_m$) ranging throughout the visible region were also prepared by exposing thermotropic cholesteric phases of ESs with a DE of more than 2 to UV light at $50^{\circ}C$. The thermal and optical properties for both the uncrosslinked and crosslinked samples and the swelling behavior of the crosslinked films in acetone were investigated. The $\lambda_m$'s of ESs, as well as HPC itself, increased with temperature. However, the $\lambda_m$'s of ESs were larger than of HPC at the same temperature and decreased with increasing DE. The temperature dependence of $\lambda_m$of the crosslinked samples was much weaker than that of ESs. Moreover, in contrast with ESs that exhibit a decrease of the isotropization temperature with increase in the DE, the networks were found to decompose at about $210^{\circ}C$, giving no transition to an isotropic state. The crosslinked samples exhibited an anisotropic swelling, suggesting that the two-dimensional crosslinking preferentially performs between ES molecules.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2451-2458
• /
• 2010

We prepared sustained release matrix system which contains carvedilol with Compritol 888 ATO used as lipophilic sustained release excipient and hydroxypropyl methyl cellulose (HPMC) or polyethylene oxide (PEO) used as hydrophilic sustained release polymer. Wet granulation compressed method was used for preparing carvedilol sustained release matrix tablets. When carvedilol sustained release matrix tablets were prepared, we evaluated the drug release kinetics which is affected by Compritol 888 ATO ratio, a kind of hydrophilic polymer (HPMC, PEO) and hot melt coating coagglutination (HMCC) process was done. The drug release kinetics was measured for 24 hours in pH 1.2 simulated gastric fluid and pH 6.8 simulated intestinal fluid, using a dissolution tester at $37.5^{\circ}C$ in 50 rpm. Dissolution rate of controlled release matrix tablets of carvedilol was evaluated by paddle method. We confirmed that HMCC process was very effective to controlled release of drugs. The rate of Compritol 888 ATO, as a lipidic material, can control the drug release pattern about the elution rate of 95% and 24 hours delay than that of the normal tablet.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.213-218
• /
• 2004

We have performed dispersion polymerization of acrylamide in tert-butyl alcohol/water mixture-using hydroxypropyl cellulose and ammonium persulfate as the stabilizer and the initiator, respectively - to study the effects that the concentration of monomer, initiator, and stabilizer, the tert-butyl alcohol/water ratios as polymerization media, and the reaction temperature have on, among other things, the polymerization kinetics, particle sizes, and molecular weights. The polymerization rate increased upon increasing the concentration of the monomer, initiator, and stabilizer, the water content in the tert-butyl alcohol/water media, and the polymerization temperature. The average particle size of the lattices increased upon increasing the concentration of initiator, the polymerization temperature, and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing the concentration of monomer and stabilizer. The viscosity-average molecular weight increased upon increasing the concentration of monomer and stabilizer and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing both the concentration of initiator and the polymerization temperature.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.6
• /
• pp.393-399
• /
• 2006

This study was aimed to design, formulate and characterize the moisture-activated patches containing acyclovir for antiviral action. Gel intermediates for film-type patches were prepared with mucoadhesive polymer, viscosity builders, enhancers and acyclovir. Patches containing acyclovir were characterized by in vitro measurement of drug release rates through a cellulose barrier membrane, and of drug flux through the hairless mouse skin. Film-type patches obtained were uniform in the thickness and showed a mucoadhesive property when contacted with moisture. The formulation was optimized, which consisted of $Cantrez^{\circledR}$ AN-169(2%), $Kollidon^{\circledR}$ VA 64(1%), $Natrosol^{\circledR}$(1%), hydroxypropyl-$\beta$-cyclodextrin(1%) and dimethylsulfoxide(0.5%). Release rates of acyclovir patches increased dose-dependently. The addition of terpenes such as d-limonene or cineole increased release rates of acyclovir, but decreased permeation rates. The permeation rates were enhanced by 2 and 2.5 times by the addition of glycyrrhizic acid ammonium salt and sodium glycocholate, respectively, compared with that of no enhancer. These results suggest that it may be feasible to deliver acyclovir through the skin or gingival mucosa from the moisture-activated patches.