• KSBB Journal
• /
• 제16권3호
• /
• pp.225-232
• /
• 2001

미생물 세표표면의 소수성은 다른 미생물과의 flocculation, 액상이나 고형물질에 부착하거나 수용액에서의 부유현상 (floatation)과 같이 미생물과 다양한 물질사이의 표면 반응에 관여한다. 이러한 점에서 미생물 세포의 소수성은 의학분야 뿐만 아니라 생물공학의 다양한 분야에서 중요한 의미를 갖는다. 이 총설에서논 미생물 세포표면의 소수성과 관련된 특성과 물질, 그리고 세포표면의 소수성을 이용한 예를 중점적으로 기술하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권6호
• /
• pp.462-468
• /
• 1999

Room temperature vulcanizing (RTV) silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water film on the surface and thus to suppress the leakage current and consequently flashover. However, the electrical property and the hydrophobicity of RTV silicone rubber coating under outdoor condition may be influenced by many environmental factors. In this studyvarious treatments, such as salt-fog, salt water immerging and UV irradiation were applied to the samples to investigate the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased asthe degradation time is longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight) silicone fluid diffused from the bulk to the surface.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.133-140
• /
• 2002

This paper aims to investigate the effect of silicone oils as processing agent affecting the loss and recovery of hydrophobicity. The recovery of hydrophobicity was evaluated by the measurement of the surface electrical resistivity and the contact angle on the SIR surface. Two kinds of silicone oils (1 and 2) having different molecular weight were selected under a consideration of hydrophobicity and processability. SIR specimens were exposed to corona discharges in air and the specimens were analyzed with contact angle and surface resistance measurements. It was observed that the contact angle and the surface resistivity of SIR increase gradually with testing time. The fast recovery of hydrophobicity of SIR, expressed by the increment of contact angle and surface resistivity, was showed in SIR2 containing silicone oil 2.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.689-696
• /
• 1997

This paper discussed effect of the surface roughness and the hydrophobicity of support material on the microbial attachment In a rotating biological contactor. The by- drophoblclty of each support material was determined by the measurement of contact angle of water and the surface roughness was measured by the surface roughness In- strument. Microorganisms have well attached on the surface of more hydrophilic support material like Nylon6 than that of the hydrophobic support material like PE. When the relatively hydrophilic surface was roughen, the microbial attachment was increased but when the relatively hydrophobic surface was roughen, the attachment was slightly In- creased because the hydrophobicity of support material was Increased by roughening the hydrophobic surface. Although both variables, the surface hydrophobicity and the surface roughness, have Influenced the microbial attachment, the influence of the surface roughness overruled that of the surface hydrophobicity. Support material whose surfaces were roughened about 1mm, 6mm and 11mm were allowed for attached 3, 7 and 24hr, but the differences of maximum and minimum attachment of each material gave nearly constant values and similar trend with time.

• Advances in nano research
• /
• 제12권1호
• /
• pp.49-63
• /
• 2022

Nanocatalysts are usually used in the synthesis of petrochemical products, fine chemicals, biofuel production, and automotive exhaust catalysis. Due to high activity and stability, recyclability, and cost-effectiveness, nanocatalysts are a key area in green chemistry. On the other hand, water as a common by-product or undesired element in a range of nanocatalyzed processes may be promoting the deactivation of catalytic systems. The advancement in the field of hydrophobicity in nanocatalysis could relatively solves these problems and improves the efficiency and recyclability of nanocatalysts. Some recent developments in the synthesis of novel nanocatalysts with tunable hydrophilic-hydrophobic character have been reviewed in this article and followed by highlighting their use in catalyzing several processes such as glycerolysis, Fenton, oxidation, reduction, ketalization, and hydrodesulfurization. Zeolites, carbon materials, modified silicas, surfactant-ligands, and polymers are the basic components in the controlling hydrophobicity of new nanocatalysts. Various characterization methods such as N2 adsorption-desorption, scanning and transmission electron microscopy, and contact angle measurement are critical in the understanding of hydrophobicity of materials. Also, in this review, it has been shown that how the hydrophobicity of nanocatalyst is affected by its structure, textural properties, and surface acidity, and discuss the important factors in designing catalysts with high efficiency and recyclability. It is useful for chemists and chemical engineers who are concerned with designing novel types of nanocatalysts with high activity and recyclability for environmentally friendly applications.

• 한국축산식품학회지
• /
• 제26권4호
• /
• pp.497-502
• /
• 2006

한국인 유아의 분변에서 분리한 10종의 분리균주를 포함하여 총 16종의 bifidobacteria에 대한 Caco-2 세포에 대한 부착성과 세포 표면 소수성을 측정하였다. 부착성과 세포 표면소수성 모두 균주에 따라 상이한 결과를 나타내었으며 균종에 따른 경향은 관찰되지 않았다. 실험 균주 중에서 B. longum D6, B. longum H4, B. breve Ml, B. thermophilum ATCC 25525, B. suis ATCC 27533, B. animalis subsp. lactis BB12 균주가 세포 표면 소수성이 높게 나타났으며, Caco-2 세포에 대한 부착성은 B. bifidum B3, B. longum D6, B. longum H4, B. thermophilum ATCC 25525, B. suis ATCC 27533, B. animalis subsp. lactis BB12, B. longum 2 등이 우수하였다. 또한 Caco-2세포에 200개 이상이 부착되는 실험 균주는 모두 60% 이상의 세포 표면 소수성을 나타내고 있으므로, 부착성이 우수한 균주 선발 시 분리 균주의 세포 표면 소수성을 측정하여 선발하는 것이 가능하다고 판단되었다.

• Restorative Dentistry and Endodontics
• /
• 제43권1호
• /
• pp.1.1-1.8
• /
• 2018

Objectives: To determine the effect of root canal irrigants on the hydrophobicity and adherence of Staphylococcus epidermidis (S. epidermidis) to root canal dentin in vitro. Materials and Methods: Root dentin blocks (n = 60) were randomly divided into 4 groups based on the irrigation regimen: group 1, saline; group 2, 5.25% sodium hypochlorite (NaOCl); group 3, 5.25% NaOCl followed by 17% ethylenediaminetetraacetic acid (EDTA); group 4, same as group 3 followed by 2% chlorhexidine (CHX). The hydrophobicity of S. epidermidis to root dentin was calculated by cell surface hydrophobicity while the adherence was observed by fluorescence microscopy, and bacteria were quantified using ImageJ software (National Institutes of Health). Statistical analysis of the data was done using Kruskal-Wallis test and Mann-Whitney U test (p = 0.05). Results: The hydrophobicity and adherence of S. epidermidis to dentin were significantly increased after irrigating with group 3 (NaOCl-EDTA) (p < 0.05), whereas in group 4 (NaOCl-EDTA-CHX) both hydrophobicity and adherence were significantly reduced (p < 0.05). Conclusions: The adherence of S. epidermidis to dentin was influenced differently by root canal irrigants. Final irrigation with CHX reduces the bacterial adherence and may impact biofilm formation.

• 한국식품과학회지
• /
• 제25권5호
• /
• pp.571-575
• /
• 1993

대두 펩타이드의 표면소수도가 혈청 콜레스테롤의 농도에 미치는 영향을 조사하기 위하여, 대두 단백질(ISP), 카세인(CNP), 이들 단백질을 펩신으로 가수분해하여 pH에 따른 펩타이드 침전 획분들(SHT, SH8, SH6, SH4, CHT, CH6, CH5, CH4)을 흰쥐에 섭취시키고 혈청 콜레스테롤 농도 및 분변 스테로이드이 배설량을 측정하였다. 그리고 각 펩타이드의 표면소수도를 ANS 형광법 및 SDS 결합법으로 측정하여, 이들의 상관관계를 분석한 결과, 펩타이드의 ANS 표면소수도가 높아질수록 분변으로 배설된 스테로이드량은 증가하였으며(r=0.81), 혈청 콜레스테롤 농도는 낮아졌다.(r=-0.868). 그러나 SDS 표면소수도는 그들과 상관관계가 없었다. 또한 대두 단백질은 가수분해에 의하여 ANS 표면소수도가 증가하였다. 이상의 결과는 흰쥐의 담즙염이, 소화중 생성된 높은 표면소수도의 펩타이드와 결합하여 체외로 배출되므로서 대두단백질의 섭취에 의한 혈청 콜레스테롤 농도가 낮아짐을 시사하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.216-219
• /
• 2002

Much quantity of anti-tracking agent, ATH is added to the silicone rubber for the protection of silicone rubber against surface discharge. Hydrophobicity recovery properties of silicone rubber could be different by the content, surface treatment state and particle size of ATH. Because hydrophobicity of silicone rubber is depend much on the surface state of ATH. In this paper, the properties of silicone rubber is investigated according to the addition of different particle size of ATH to the silicone rubber. Hydrophobicity recovery properties and arc resistance of silicone rubber were investigated according to the addition of different particle size of ATH. Hydrophobicity recovery properties of silicone rubber were evaluated by the measurement of contact angle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1560-1562
• /
• 2000

The paper reports on a study of the influence of the silicone oils on the tracking and erosion resistance and hydrophobicity of SIR. Two silicone oils(A, B) having different chemical structure were selected in consideration of goof hydrophobicity and processability. Tracking and erosion resistance of SIR was investigated by the rotating wheel dip test (RWDT). In this test tracking and erosion areas due to glow and partial arc discharges cause an increase in the leakage current with an increase in time. Leakage current of SIR was decreased with increasing ratio of oil A/B. SIR was exposed to corona discharges in air and the specimens were analyzed with contact angle. It was observed that the contact angle of SIR was increased gradually in time. The recovery of hydrophobicity was increased with increasing ratio of oil A/B.