• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.223-230
• /
• 2017

Three super hydrophobic fluorescence dyes were selected to dye high molecular weight polyethylene fiber and their molar absorptivity, emission spectrum, and quantum yield were measured. From the results of color strength on the fiber, all the three dyes exhibited linear increase according to the dye concentration and Fluoro3 dye showed the highest color strength among them. Emission strength of the fluorescence dyes on the fiber was investigated according to the dye concentrations. The emission was increased with the increase of the dye concentration at relatively low dye concentration and then after showing the maximum emission strength the emission was decreased at higher dye concentrations. The highest emission was obtained in Fluoro2 dye. Color fastness to washing and rubbing was generally good enough, however, especially to light, only Fluoro3 dye exhibited rating 3 acceptable practically and Fluoro1 and 2 was ratings 1 which is unacceptable level.

• Applied Biological Chemistry
• /
• v.32 no.2
• /
• pp.126-131
• /
• 1989

Binding properties of the degraded 59kD phytochrome from etiolated Avena sativa seedlings to liposomes and Cibacron Blue dye were examined. In contrast with the native 124kD and partially degraded 118kD phytochromes, the farred light absorbing(Pfr) forms of the 59kD phytochrome binds to liposomes and Cibacron Blue dye via electrostatic interactions. Results indicate that the 59kD Pfr does not hold a hydrophobic surface which is exposed upon Pr to Pfr phototransformation of the 124 and 118kD phytochromes. Since a relatively extensive hydrophobic region is located in the chromophore bearing domain(59kD) of phytochrome(Hershey et al., Nuc. Acids Res., 13, 8543, 1986), the 55kD tryptic domain from the C-terminus plays an important role on the exposure of the hydrophobic area in the 118 and 124 Pfr to occur.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.85-85
• /
• 2002

The interaction between berberine and tannin in aqueous solution was investigated spectrophotometerically. The dyeing mechanism of silk fabrics (control and tannin treated silk fabrics) with berberine was based on thermodynamic parameters obtained from equilibrium adsorption experiments. In adsorption spectra of aqueous solution of berberine and tannin mixture two isosbestic points (328nm, 357nm) were found and the mole fraction of reaction of components was 1:1. Initial dyeing rates were increased and the diffusion of dye was more effective by tannin treatment. Without regard to tannin treatment the adsorption isotherm of berberine was the langmuir type except high temperature, 80℃. By tannin treatment the saturation dye uptake was increased, the increase of dye uptake appeared to be a result of entropy change rather than enthalpy change. All these results can be interpreted by the hydrophobic interaction between berberine and silk treated with tannin and it is reasonable to conclude that not only the ionic force, but also the hydrophobic interaction contributes to the binding of berberine and tannin treated silk treated with tannin.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.9-17
• /
• 2002

The interaction between berberine and tannin in aqueous solution was investigated spectrophotometerically. The dyeing mechanism of silk fabrics (control and tannin treated silk fabrics) with berberine was based on thermodynamic parameters obtained from equilibrium adsorption experiments. In adsorption spectra of aqueous solution of berberine and tannin mixture two isosbestic points (328nm, 357nm) were found and the mole fraction of reaction of components was 1:1. Initial dyeing rates were increased and the diffusion of dye was more effective by tannin treatment. Without regard to tannin treatment the adsorption isotherm of berberine was the langmuir type except high temperature, $80^\circ{C}$. By tannin treatment the saturation dye uptake was increased, the increase of dye uptake appeared to be a result of entropy change rather than enthalpy change. All these results can be interpreted by the hydrophobic interaction between berberine and silk treated with tannin and it is reasonable to conclude that not only the ionic force, but also the hydrophobic interaction contributes to the binding of berberine and tannin treated silk treated with tannin.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.27-34
• /
• 2015

Novel super hydrophobic disazo red dyes were synthesized to improve light fastness of the primary monoazo red dye of previous study on polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers. 4-Alkylanilines were diazotized and then coupled to 2,5-dimethylaniline to produce dye intermediates which were then further used to synthesize final disazo red dyes by diazoization and coupling to ${\beta}$-naphthol. Considering both affinity of the dyes toward both polyolefin fibers and color fastnesses, the decyl-substituted dye was determined as the optimum dye. The decyl-substituted disazo red dye exhibited good dyeability on both polyolefin fibes and almost the same color values as the previous primary monoazo red dye. Light fastness on ultra high molecular weight polyethylene fibers was improved up to rating 3~4 compared to rating 2~3 of the previous primary monoazo red dye.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.172-179
• /
• 2001

In order to improve dye uptime and wash fastness on dyeing of cotton fabrics with Amur cork tree, twitter ionic groups, acid groups, hydrophobic groups or cross linkage were introduced into cotton fabrics. Results obtained were as follows, 1 The optimum modification of cotton fabrics was carbosy methylation in the water solution containing 15% sodium chloroacetate and 15% sodium hydroxide and then introducing hydrophobic groups by treating in the solution containing $30m\ell$ DMSO and $3m\ell$ 2,4-TDI 2. Numbers of carbon, diisocyanate group than monoisocyanate group and aromatic compound than aliphatic compound in introduced hydrophobic groups were effective. 3. The dye uptake and wash fastness wore enhanced significantly by treating only with 2,4-TDI. 4. The wash fastness seems to correlate to the degree of swelling of the fabric during washing and also depend on the Interaction between dyes and acid groups as well as hydrophobic groups.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.305-310
• /
• 2003

Hydrophobic core variant of ubiquitin appeared to have partially folded structure at pH around 2. The intrinsic tryptophan fluorescence emission maximum of this ubiquitin variant at pH 2 showed slight blue shift compare to that of unfolded state, suggesting that some residual tertiary structures remain in this solvent condition. At the same solvent condition, this ubiquitin variant binds with hydrophobic dye, 8-anilinonaphthalene-1-sulfonic acid(AMS), which is known to bind to exposed hydrophobic surface. Furthermore, far-UV circular dichroic spectrum of this ubiquitin variant in the diminished pH was remarkably different from the far-UV CD spectrum of the native state or unfolded state. Based on the molar ellipticity at 220 nm, this ubiquitin variant at pH 2 appeared to have significant amount of secondary structures. All these observations suggest that this ubiquitin variant in the diminished solvent pH has loosely folded hydrophobic core with some secondary structures, which are key features of molten globule conformation. Since molten globule has long been considered as a protein folding intermediate, it is considered that this hydrophobic core variant ubiquitin will serve as a valuable model to study protein folding process.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.165-172
• /
• 2014

Novel super hydrophobic orange dyes having maximum absorption band at 450-500nm were synthesized to dye polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers, using 4-alkylanilines and ${\beta}$-naphthol. Their absorption spectra at visible range showed almost the same, which meant that the alkyl substituents introduced to chromophore did not affect on color appearance of the dyes. Considering both color strength and wash fastness, the decyl-substituted dye was determined as the optimum one practically. From the dyeing results at various conditions, the optimum dyeing was $130^{\circ}C$ for 1 hour with 5% owf of dyes. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was also acceptable giving rating 3-4 for polypropylene fibers and rating 3 for ultra high molecular weight polyethylene fibers.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.156-163
• /
• 2016

The 6 novel super hydrophobic bluish-green dyes, showing the maximum absorption at 600~650nm, were synthesized to dye polyolefin fibers such as polypropylene and high strength polyethylene fibers. Their absorption spectra appeared almost the same at visible range, which meant the length of alkyl substituents did not affect on color appearance of the dyes. The optimum length of alkyl group was determined as hexyl substituents from the practical point of view. From the dyeing results, the optimum dyeing condition was $130^{\circ}C$ for 1 hour. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was obtained also good rating 4 for both fibers.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.26-26
• /
• 2012

The hydrophobic nature of the wool surface give rise to difficult penetration of dye molecules. Among all the methods of modification, graft polymerization is an attractive method to impart a variety of functional groups to a polymer. Grafting has been made by irradiating the light on the polymer in the presence of a solvent containing monomer. The energy source commonly used are high-energy electrons, X-rays, UV and visible light. UV irradiation is a relatively low-energy radiation in comparison with others since it has the least possibility to change bulk properties. In the present paper, a photo-reactive dye was synthesized from quinizarin by the reaction with methacryloyl chloride. The synthesized dye was continuously grafted onto wool fabric at room temperature by UV irradiation. Several key parameters including UV energy, dye concentration and pH have been examined to understand their influence on the photoreactive coloration.